Aluminum Die Casting Chair Base FEATURES:
Casting quality has a great influence on the performance of mechanical products. For example, the wear resistance and dimensional stability of machine tool castings, directly affect the precision of the machine tool to keep life; The size accuracy and surafce roughness of all kinds of pump impellers, housings and other cast components shell, directly affect the working efficiency of the pump and the hydraulic system; The strength and heat shock resistance of internal combustion engine cylinder block, cylinder head, cylinder liner directly affect the working life of the engine.
• Any size of casting can be produced up to 200 tons.
Aluminum Chair Base,Aluminium Die Casting Chair Base,Aluminum Die Casting Bar Chair Base,Aluminum Die Casting Home Chair Base Zheke Mould Technology Co. Ltd. , https://www.zkdiecasting.com
The vacuum rake dryer designed and manufactured by Sanmenxia Biotech Drying Engineering Co., Ltd. is mainly used for the drying of explosive, easily oxidized, paste-like materials. Operating under high vacuum, the boiling point of the solvent is reduced while the air is isolated, avoiding oxidation and overheating during material drying.
The working principle is as follows: In a horizontal cylinder of a dryer, a stirring shaft and stirring blades are installed. The jacket, stirring shaft and stirring blade of the barrel can all pass into the heating medium. Under the action of stirring, the material is fully mixed and exchanged in the barrel. The solvent vapor is discharged through the vacuum port on the shell and passed through the bag filter. Dust, enter the condenser to condense and recover. After the drying requirement is reached, the machine stops and the material is discharged from the discharge port at the lower part of the cylinder, and then the operation of the next batch of material is performed. Intermittent operation, circular cylinders, and precision machining of dynamic and static seal points enable the device to achieve a high degree of vacuum. Depending on the nature of the material, the inner wall of the barrel, the mixing shaft, etc. can be mirror polished.
This device has the following features:
1. The material is dry and uniform; oxidation and overheating are avoided; products with extremely low moisture content can be obtained, and packaging can be achieved without crushing.
2. High evaporation intensity, generally evaporating 10-15kg (water)/m2·h
3, no air intervention, the condenser load is very small, can easily recycle the material solvent.
4. After the solvent vapor entrainment is filtered through the bag filter, there is no environmental pollution.
5, energy consumption: general evaporation 1kg water needs 1.3-1.5kg of water vapor
6. The discharge valve is a dead ball valve in the cylinder body, which is convenient for unloading.
7, thermal media available steam, hot oil, hot water.
Can be applied to: phthalocyanine blue, anthraquinone sulfonic acid, reduced olive green R, salicylic acid intermediate, GB dye, paste AS intermediate, Prolong polymer, diaminoanthraquinone.
Drum dryer
The tumble dryer is an indirect heating continuous drying machine. The material forms a layer of uniform film on the heat transfer surface, which is dried as the roller rotates. It is removed at the discharge point by a scraper to obtain a finished powder or sheet product. The specially designed cloth device makes the film uniform and adjustable in thickness, suitable for paste-like, porridge-like viscous materials. The material has a short residence time at high temperatures and will not overheat. Compared with the direct drying of hot air, the drum dryer does not require a powder separation device, nor waste gas to take away a lot of heat, and the operating cost is low.
According to the different materials, there are three ways of fabric:
1, multi-pressure roller cloth:
A plurality of pressure rollers are arranged on the outer surface of the roller, and the gap between the roller and the roller surface can be conveniently adjusted. The number of rollers and the gap control the film thickness. This type of cloth is particularly suitable for sticky porridge-like materials such as az starch, baby foods, potato chips, fruit slices, and the like.
2, the middle roll fabric:
The middle roller is immersed in the material tank, and the middle roller rotates to bring up the slurry, and then the material film is placed on the surface of the roller, which is suitable for the heat-sensitive material, and avoids the roller and the material liquid from contacting and heating for a long time.
3, immersed fabrics:
The drum is directly immersed in the liquid, and the drum rotates naturally to form a film, which is suitable for general paste-like non-thermosensitive materials.
This device features:
1, Evaporation of 1kg of material water generally requires steam 1.2~1.5kg.
2, no dust flying, low noise, good operating environment, low operating costs.
3, suitable for sticky porridge, slurry materials, continuous operation.
4. Cooling of the material can be achieved by introducing a cooling medium.
Widely used in the following areas:
Yeast, antibiotics, lactose, starch paste, sodium nitrite, dyes, distilled waste, sulfide blue, sulfurized element, light calcium carbonate, sodium benzoate, aluminum trisulfate, glucose, oxalic acid, pulverized coal, MSG, Lid Powder, whitening agent, direct Yuanqing, heavy alkali, open powder, jade powder, sodium bicarbonate, zinc base, chromium sulfate, bone glue, activated carbon, sulfur blue, calcium acetate, copper sulfate, whole milk, skim milk , а-starch, animal glue, whey, tannin extract, dye directly black, dye Prussian blue, milk, vegetable gum, calcium arsenite.
• Casting is the often cheapest and most direct way of producing a shape with certain desired mechanical properties.
• Certain metals and alloys such as highly creep resistant metal-based alloys for gas turbines cannot be worked mechanically and can be cast only.
Brief Introduction of Leading Products of Sanmenxia Dryer
Vacuum rake dryer