Lifting Belt
About Polyester Slings for Lifting
Polyester is a synthetic (man made) material that is extremely light weight and when made into lifting slings makes a very little cost effective lifting sling. The material is soft to touch (hence soft slings) and therefore is less likely to cause damage to the goods when they are lifted and will not cause the type of injuries to the user associated with Wire Rope Sling, for example cuts caused by broken wires, manual handling or impact injuries. Synthetic polyester (fiber material) slings are much lighter weight than both wire rope or chain slings and therefore this type of lifting sling is much easier to handle.
It is include Webbing Sling
Round Sling
Application
How to use slings
1. Never use slings with damages or defects.
2.Use slings with clear identifications.
3.Check working load Limit ,length and working position
4.Never use slings with knots.
5.Never use slings on sharp edges without correct protection .
6.Use the correct mode factor and check lifting angle.
7.Trapping the sling when lowering the load should be avoided.
8.The temperature should be between -40℃ and 100 ℃.
9.Stitching should not be placed over hooks or others lifting devices.
10. Sling should be stored in dry and clear conditions .Away from heat sources, direct sunlight and UV rays.
11.In case of chemical environment ,please check with the manufacturer.
12.Elongation rate <3% at working load and <10% at breaking load
CAUTIONS
1. Do not exceed working load limit
2. Prevent shock-loading.
3. Where selecting a sling it is very important to consider the angles at which the sling will be used.
4. Slings are subject to cutting when lifting items with sharp edges. In this case always use wear sleeve
5. Do not use a damaged sling.
6. Never make knots in a sling.
7. Never drag a sling from underneath a load that is resting on it.
8. Chemical active environments can affect the strength
9. Always store slings in a cool dry and dark place when they are not in use for prolonged periods.
10. Always read and understand the operating instruction before use.
Reliable Sling
Since 2007
Our Services
1.We treasure and try to understand all the different needs of our clients and seek to forge a long term professional relationship with them. The satisfaction of each and every customer is our main goal and motivation in conducting our business.
2.Our products are of high-quality standards and always come with the certificate of compliance by the manufacturers. There is the strict quality control for each of our products.
Lifting Belt,Lifting Belt Sling,Polyester Lifting Belt,Lifting Sling Belt Hebei Liston Lifting Rigging Manufacturing Co., Ltd. , https://www.liftingriggings.com
On the morning of June 25, Dongfeng Commercial Vehicle Company's engine factory 4H assembly line ushered in the date of its move. Many forklift trucks loaded with professional equipment are busy in the workshop, and large trucks are gradually being rolled out from the workshop to the new plant of the commercial vehicle company's powertrain in the Industrial Park Xinye District Industrial Park in Shiyan.
The EQ4H engine assembly line relocation project is one of the processes of the new power plant expansion project. After the relocation, it will achieve mixed production of the 4H engine and the X7 engine, with a production capacity of 60,000 (30,000 for the 4H engine and 30,000 for the X7 engine). The director of Dongfeng Commercial Vehicle Company’s engine plant told the reporter that the mixed flow of the two product assembly lines is to save investment and increase production efficiency on the one hand, and reserve space for the increase of production capacity of 100,000 units in the latter period.
According to Zhou Wenqiang, chief of the technical department of the engine demolition and relocation, the project team made two production preparations in order to prevent the demolition from affecting the production of the 4H engine. First, the production of the 4H engine was maintained to the old dCi11. Assembly line to production, the second is the existing 4H assembly line demolition, installation and synchronization. Since this line contains information systems such as production, quality, equipment, and electrical, the relocation time is short and there is a high technical difficulty. Engine plant technology and special equipment manufacturers have made adequate preparations and put in a lot of manpower. To ensure the completion of the relocation and installation and commissioning work within one month.
At the power plant's new plant, the reporter saw a new plant that was about to be installed at the facility. The area was about twice that of the old factory. Some of the equipment that had arrived at the site had been unpacked and placed in the designated location. Necessary to carry out various tasks.
Ye Hui, deputy director of the powertrain engine shop, said that the relocation work started on June 24 and is expected to be fully completed in mid-July. Installation and commissioning and personnel training will be completed by the end of August, and production will begin in September. After the relocation is completed, the reassembly of the assembly line will be completed. The 4H and X7 mixed-flow assembly lines total more than 40 sets (sets) of equipment with a line length of 150 meters. After the relocation and technological transformation, the new production line will undergo tremendous changes, the re-layout of the production line will be more compact, and the original bilateral operations will be changed to unilateral operations; the logistics of the self-made parts and semi-assembly lines will change from forklift to self-chain. Personnel efficiency increased by 30%; information systems, error prevention technologies, etc. were fully upgraded. At the same time, the engine plant takes this relocation as an opportunity to fully promote technological transformation, promote technological innovation, and greatly enhance the competitiveness of the factory.
Specializing in webbing slings, towing strap, Ratchet Tie Down.
Consecutive sales increasement of 10 years
Passed the ISO9001:2008 and international certificate as CE, GS and TUV etc.
Provide OEM and ODM service to overseas customer
Export to more than 40 countries, mostly in European countries, America, Africa, Middle-east.
Our mission is to create high-quality, high-end products, allowing customers to use more convenient, more secure, more assured.
Dongfeng Commercial Vehicle Company 4H assembly line moved to new house