Top Ten Reasons for Fuel Consumption and Fuel Saving Methods

Top Ten Reasons for Fuel Consumption and Fuel Saving Methods

Top Ten Reasons for Fuel Consumption and Fuel Saving Methods

It can be said that the rising and falling time of oil prices affects the owner's heart. However, if you can pay more attention to your driving and vehicle habits at ordinary times, it is not a problem to let fuel consumption fall to the most reasonable range. Below, the author will give you a list of the 10 factors that may cause fuel consumption increase, and the 10 cheats that can help you to reduce fuel consumption, which may help you.
1. Hot car in the morning is too long or travel distance is too short
Oil-saving Cheats: Proper Hot Vehicles Do Not Drive as Short as Possible
I believe that many owners have a good habit of hot cars in the morning, but blindly waiting for the speed of the vehicle to drop to normal or to raise the water temperature to normal in the same place, it is tantamount to making life difficult with their own wallet. Experts suggest that drivers in most parts of China can park a vehicle for about half a minute when the vehicle is started, and then travel normally after a distance. For some northern cities, when the winter is too cold, it is appropriate to extend the time of the hot car. In addition, when the water temperature is too low, the computer will control the fuel injectors to inject more fuel. Therefore, if your commuting distance is very close, and the cold weather in winter is not easy to rise to normal, then your car is It may become typical of high fuel consumption.
2. Tyre pressure is abnormal or large tires are exchanged
Fuel-saving Cheats: Correct Tire Pressure Original Tire
Experts say that when the tire is under-inflated, it will affect the fuel consumption. When the tire pressure is too small, the contact area between the tire and the ground will increase the driving resistance, so the vehicle will naturally use more oil. For the same reasoning, the models with the same displacement, model, load, etc. assume that the A vehicle uses the original tire and the B vehicle uses the tire with the larger tire width. Therefore, because the vehicle's running resistance increases, the B vehicle will also have more cars than the A vehicle. Consume more fuel. Of course, if the owner fills the tire with too much air pressure and replaces tires that are too narrow in width, it will increase the likelihood of punctures, uneven wear on the tires, and reduced driving comfort.
3. Not planning a good course, driving on a crowded road, changing lanes frequently
Cheats Tips: Choose a route to travel straight before you travel
Traffic jams occur in many big cities, and some sophisticated drivers choose the least crowded route between their starting point and destination. For this, it is recommended that the owner of the vehicle plan the route in advance and pay attention to local traffic information and road conditions to avoid congested roads. Because reducing the starting and stopping of vehicles and driving at an economical speed, this is tantamount to saving you fuel. Also, many owners of cars often change lanes on the road. Not only do you need to accelerate, decelerate, and travel distances are shorter than straight-line distances, so this is one of the reasons for the increase in fuel consumption.
4. Did not regularly give the car "cleaning"
Fuel Saving Cheats: Keeping the Body Clean
Conditional friends recommend that the appearance of the vehicle be cleaned regularly and that regular waxing of the vehicle is a good way to save fuel. The greatest resistance of the vehicle during driving comes from the air. If there is an accident in your vehicle, the vehicle body may have been deformed. This may affect the aerodynamics of the vehicle. Even a slight bump or depression will affect the fuel consumption. The snowfall on the winter car body is also a burden on the vehicle.
5. No flameout or frequent ignition when idle for a long time
Oil-saving Cheats: Turn Off When Off
When faced with waiting for a long time without moving the vehicle, it is recommended that the owner can choose to turn off the engine. We can often see taxi drivers choose to turn off the engine and go to the cart while they are lining up to pick up passengers. In fact, this is the best way to save fuel in the same situation.
When you are waiting for friends and being stuck on the road, it's better to turn off the engine. Every time the engine is started, the amount of fuel injected by the computer will be more, so frequent start of the engine over a period of time will definitely increase the fuel consumption of the vehicle. The auto repair experts also said that frequent start of the engine, it is a kind of "battery abuse" performance.
6. Violent fueling and frequent braking during driving
Oil-saving Cheats: Treating Throttle "Tender Point"
It is not advisable to ask everyone how big the way to hit the gas before the start of the movie. After all, the stop line is not the starting line of the track. Follow the normal rhythm of starting, refueling, shifting, after a long period of time can save a lot of fuel. If it is not necessary when driving on the road, then it is best not to overtake the vehicle more frequently. Driving at a constant speed can reduce fuel consumption. In addition to grasping the distance between you and the car ahead, minimizing unnecessary braking actions can also bring you fuel-efficient pleasure.
7. Vehicles increase load for no reason
Oil-saving Cheats: Moderately decorated car to "reduce"
Many friends who have just bought a car like to put such accessories and appearances into the car. What is more, it is simply moving the office and home to the car; blindly installing a large enclosure around the car. The rear wing, winch, and luggage rack also increase the fuel consumption of the vehicle. The vehicle's fuel consumption will increase accordingly with each additional weight. Therefore, it is recommended that all the owners of car owners decorate cars within a reasonable range. Friends who have entered the overly-decorated misunderstanding will quickly reduce the car's burden.
8. The engine oil is not filled according to the specified label
Oil-saving Cheats: Reasonably Adding Oil
Viscosity of engine oil is the main indicator of engine oil, for example, 15W-40 where “W” means winter (winter). The smaller the number in front, the thinner the viscosity of engine oil is, the better the fluidity is, and the lower the available ambient temperature is. The better the protection of the engine against cold starts, the higher the number of “W” is the indicator of the high temperature resistance of the oil. The greater the value, the better the protection of the engine oil at high temperatures. Excessive selection of higher viscosity oils will increase the resistance of the engine components, which will both consume power and increase fuel consumption.
9. Low speed or high speed
Oil-saving Cheats: Correct, timely addition and subtraction
This kind of situation may appear more often in new drivers. Many times the speed of the vehicle is already high and you do not have a corresponding upshift. Therefore, as the engine speed becomes higher and higher, the fuel consumption naturally soars. You may wish to select the appropriate shift timing by referring to the vehicle's reasonable speed and gear position. The other is that the vehicle's speed is too low, but it still stays at a high position. The most obvious feature of this situation is that the engine and the car body have started to shake and may turn off at any time. At this time, some friends will choose to increase the throttle. , And increasing the throttle means that the amount of fuel injection rises. The best solution to this situation is to reduce gear.
10. Open the windows in the summer and open the air conditioning in traffic jam
Oil-saving Cheats: timely, moderate use of air-conditioning
People in the air-conditioned car will naturally be comfortable in the summer, but as the engine load increases, fuel consumption also increases. At this time, some car owners’ friends decided not to turn on the air conditioner and chose to open all the windows to cool down, but the driving resistance of the windows opened while the vehicle was driving would be even greater than the power consumption of the air conditioner compressor. Therefore, the way to cool the windows at low speed is Advisable, but it is more cost effective to open the air conditioner while driving at high speed. In addition, when the traffic jam increases, the fuel consumption of the vehicle increases, and if the air conditioning is driven, it is better to shut down the air conditioner if the traffic is congested and the temperature is still acceptable.

Pipe Cutting Machine

A pipe cutting machine shear, historically known as a lever shear and sometimes as a crocodile shear, is a metal-cutting shear with a hinged jaw, powered by a flywheel or hydraulic cylinder. Alligator shears are generally set up as stand-alone shears; however, there are types for excavators. They are generally used to cut ferrous members, such as rebar, pipe, angle iron, or I-beams.

Steel Pipes Shear, Iron Pipes Shear, Metal Pipes Shear, Copper Pipes Shear

Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.eco-metalsrecycle.com