4 Axis Milling Machine,4 Axis Machines,Cnc Milling Machines,4-Axis Cnc Milling Machines Dongguan Liyang Intelligent Technology Co., Ltd , https://www.leyomachine.com
In 2011, the Ministry of Industry and Information Technology will focus on the production consistency management in the commercial vehicle industry. In 2011, it began to gradually implement the management of product production consistency. The idea is that the company's own application and the Ministry of Industry and Information Technology check from top to bottom. Since September 2010, the Ministry of Industry and Information Technology and the Ministry of Public Security jointly issued the "Notice on Further Strengthening the Supervision and Registration of Road Vehicles Consistency in Manufacturing Production." The Ministry of Industry and Information Technology and the Ministry of Public Security have conducted several rounds of production consistency check. The consistency of production must be gradually implemented. If companies do not attach importance to the issue of production consistency, they will be severely punished.
â—Check from 2010
After the two ministries issued the “noticeâ€, the work of checking the consistency of production continued from 2010 to the present. In 2011, the work focus of major heavy truck companies remained the consistency of production.
It is understood that trucks are mainly used to check the conformity of dimensional parameters, weight parameters, guard strength, reflective markings of vehicle configurations, and ABS devices, as well as to install side and rear lower protective devices at different locations, trucks and tanks for trucks. Wait. Passenger cars mainly focus on issues such as safety configuration and spot order production, focusing on the inspection of sleeper buses and double-decker buses.
For this reason, the Ministry of Industry and the Ministry of Public Security have conducted several inspections. According to the introduction, the heavy truck company signed a "guarantee" for this purpose and promised that the product will meet the requirements of production consistency. The products in the “Announcement†have also been cleared several times in 2010. The inspection of the vehicle management center focuses on the rear lower protective device, reflective signs and ABS of the trucks, especially the installation of ABS. Businesses generally do not install because users do not need it. From April 1, 2011, more than 16 tons of tractors are required to install ABS. 
â— Large-scale verification will commence
Why does MIIT pay so much attention to production consistency? According to informed sources, regarding the inspection of production consistency, as early as a few years ago, the state attached great importance to this issue and has been carrying out work in this area. In 2011, the reason why such importance was attached was due to the absence of the lower protective barrier on trucks after the CCTV “3.15†party was exposed in 2010.
Therefore, since 2010, inspections and documents on production consistency have been issued multiple times. In May 2010, the Ministry of Industry and Information Technology and the Ministry of Public Security jointly conducted a 15-day inspection of the production consistency of vehicles. The scope of inspection covered 36 vehicle management agencies in 19 provinces. Immediately afterwards, the Ministry of Industry and Information Technology and the Ministry of Public Security issued the “Notice†in September. In October, the relevant authorities began to verify the utilization quality coefficient and the height of the dump truck products, and asked the company to wait until November 5, 2010. Make corrections.
In January 2011, the China Machine Center issued a "Circular on the rectification and cleanup of products within the "Announcement", focusing on the verification of ABS and protective devices.
â—The consistency of truck production is more serious
Many companies and distributors have said that the intensity of this inspection of production consistency has never been greater. It is understood that the inspection efforts in 2011 will continue to increase. Once a problem is found, the company will be severely punished. If it is found that there is a problem of production inconsistency, the product must cancel the “Announcement†and stop the vehicle from uploading the entire vehicle. If the information on the vehicle certification is serious, the company’s production qualifications will also be affected.
However, the interviewed companies all expressed their confidence in passing the inspection. The relevant companies have been preparing for a long time and will not have such problems. For example, reflective signs and lower rear protective devices have all been made according to the policy requirements. Now mainly ABS, to do work with the user, to the user that this is installed in accordance with national policy requirements, I hope they can understand.
According to another report, relevant agencies have already conducted in-depth inspections of production consistency in some regions, and may start again in April and May 2011.
In 2011, the Ministry of Industry and Information Technology focused on the consistency of commercial vehicle production, focusing on checking heavy truck ABS