CCMC`s 124 single Disc Mills are designed for optimum performance. Our engineers focused on structural stability to minimize vibration, reducing maintenance cost and solidifying the tram control. The results produced one of the finest wet corn disc mills on the market today.
CCMC`s 136 single Disc Mills are designed for optimum performance. Our engineers focused on structural stability to minimize vibration, reducing maintenance cost and solidifying the tram control. The results produced one of the finest wet corn disc mills on the market today.
CCMC`s 152 single Disc Mills are designed for optimum performance. Our engineers focused on tram alignment, the minimization of vibration and equipment durability, producing one of the finest wet corn disc mills on the market today.
Grain And Oil Machinery,Wet Corn Impact Mill,Grain Mill Impact Detacher,Disc Grinding Mill For Starch Changchun Meichen Machinery Co., Ltd. , https://www.ccscreenbox.com
The basic knowledge of balancing valve and its principle
Balance valve is under hydraulic conditions, play a dynamic, static balance adjustment valve. Such as static balance valve, [dynamic balance valve]. Static balance valve, also known as balance valve, manual balancing valve, digital lock balance valve, two-position control valve, which is by changing the valve core and seat gap (opening), to change the flow resistance through the valve to achieve regulation The purpose of traffic, the role of the object is the system resistance, the new amount of water can be balanced according to the proportion of design and distribution, each branch at the same time proportional increase or decrease, still meet the needs of the current part of the load demand climate needs, play The role of heat balance. Dynamic balance valve is divided into dynamic flow balance valve, dynamic pressure balance valve, self-pressure control valve and so on their own. Dynamic flow balance valve, also known as: self-flow control valve, self-balancing valve, constant flow valve, automatic balancing valve, which is based on system conditions (pressure) changes automatically change the drag coefficient, Within the range, you can effectively control the flow through to maintain a constant value, that is, when the pressure difference between the front and back of the valve increases, the valve automatically closes the flow of small movements can not increase, on the contrary, when the pressure drop decreases, the valve Automatically open large, the flow remains unchanged, but when the pressure is less than or greater than the normal working range of the valve, it can not provide an additional pressure head, the valve hit the fully open or fully closed position than the flow rate is still set Low or high flow rate can not be controlled. Dynamic pressure balance valve, also known as self-pressure control valve, differential pressure controller, regulator variable synchronizer, differential pressure balance valve, which is used to adjust the pressure valve opening, the use of spool pressure Reduce the change to make up for the change of the pipeline resistance so as to keep the pressure difference basically unchanged when the working conditions change. Its principle is that within a certain flow range, the pressure drop of the controlled system can be effectively controlled, that is, when When the system pressure increases, the valve will automatically close the small movements, which can ensure that the controlled system pressure increases. On the contrary, when the pressure difference decreases, the valve opens automatically and the pressure difference remains constant. Self-pressure control valve in the control range of the automatic valve plug is closed, the pressure across the valve exceeds the preset value, the valve plug automatically opens and automatically adjusts the opening under the action of pressure-sensitive film to maintain pressure at both ends of the valve The difference is relatively constant.
Prev Article
Li Chi bathroom: lead online agent model