Ten Points for Wireless Bridge Deployment in Wireless Monitoring System

Wireless bridge is now an important device in wireless monitoring system. In order to prevent failures during use, some precautions should be taken during installation and deployment to achieve the purpose of correct installation. The following Lean technology has more than 10 years of professional experience. To sum up ten points of attention:

1, according to their actual needs for signal adjustment.

After receiving the equipment, many customers feel that the greater the strength of signal operation, the better. The use of different scenes for the signal operation requires different strengths. In general, the distance is relatively short, and the intensity does not need to be large. It is advisable to inform your professional staff of Leandan about your usage before purchasing. We will help you to debug. Basically no need to set anything.

2, according to the SSID number to network.

The SSID refers to the name of the wireless network. It is recommended that the user use the SSID name that contains the specific meaning. The same SSID number is a group that can be paired. Even if it is the first time that you want to set up a wireless network, don't worry about not operating.

3, set a safe mode for wireless networks

Many people do not have the awareness of wireless network encryption for convenience, and do not think that all users connected to the wireless network are trustworthy. It is recommended to set a password. Only after entering the password or verifying can you use the wireless network.

4, pay attention to the security of wireless AP

Many people do not care about the security features of AP devices, which makes wireless networks very insecure. Therefore, in the actual deployment of wireless APs, users need to fully understand the security functions provided by wireless AP devices, such as limiting access and early warning mechanisms, so that the network can be effectively optimized through the functions provided by the devices. .

5, reset the wireless AP initial password

After the wireless AP is deployed, the first thing to do is to reconfigure the internal password. Otherwise, anyone who uses the Internet to get the default password may have direct access to the access point's configuration interface.

6, choose PoE power supply method as far as possible

It is recommended that you use PoE power supply. By using an unused Ethernet port, the power supply can supply power to the access point, which can avoid the troubles caused by the use of wires. And Lai'an basically will also be equipped with POE power supply module.

7. When deploying a wireless wireless bridge, do not place near metal objects

When deploying a wireless bridge, users need to be aware that the actual location of the deployment should not be subject to radio interference. Therefore, when deploying wireless APs, try to avoid deploying devices near metal structures.

8. Prevent the overlapping effect of DHCP scope

Do not configure more than two wireless bridges at the same time using the same DHCP scope. Otherwise, overlapping DHCP scopes in the coverage area will cause IP address conflict.

9. Provide backup power for wireless bridges

When deploying a wireless bridge, it is a good idea to provide UPS backup power for all bridges to ensure that the wireless network is still operating normally when the main power source fails. This can avoid user data loss caused by sudden power failure.

10, pay attention to the warranty card, do not disassemble the machine.

Even if the equipment is reliable and trustworthy, the warranty card should be kept. However, if it is a wireless bridge purchased in Lehman, there is no need to worry about this. Every sold device will have a record. Even if there is no warranty card, it will be within the scope of normal maintenance. However, remember not to dismantle the wireless bridge at will, and the disassembled wireless bridge cannot be guaranteed.

CQ2 Pneumatic Cylinder Barrel
CQ2 series compact air cylinder is double acting type Pneumatic Cylinder
and has several types: double-acting, single-acting, double rod or adjustable stroke types.
Its compact structure can effectively save installation space.
Its dimension is the same as CQ2, CDQ2, CQ2B, CDQ2B cylinder of other brands.

Available bore size: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100mm Cylinder Tube

The CQ2 series cylinder is a thin cylinder produced by SMC Corporation in Japan, which is widely used in various mechanical equipment due to its compact design, especially in applications with limited space.

Based on the information I have obtained, here are some characteristics of the CQ2 series cylinders:

Model and specifications:

The model CQ2B500-100 may represent a cylinder with a diameter of 50mm and a stroke of 100mm.

CQ2B32-20D may refer to a cylinder with a diameter of 32mm and a stroke of 20mm.

characteristic:

These cylinders typically have a shorter total length and are suitable for applications with limited installation space.

Provide options for different itineraries to meet different application needs.

You can choose a version with a magnetic switch installation slot for convenient position detection.

Provide multiple installation methods, such as dual ear ring (CDQ2D40-50DMZ).

Application:

Suitable for application scenarios that require precise positioning and control, such as automation equipment and textile machinery.

The damping cylinder version can be used for applications that require smooth motion, such as buffering or speed control.
CQ2 Pneumatic Cylinder Barrel,CQ2B Pneumatic Cylinder Barrel,CQ2 Pneumatic Cylinder Tube,CQ2 Pneumatic Cylinder Tubing
Foshan Weiyingjia Technology Co., Ltd , https://www.wyspneumatic.com

Posted on September 26, 2024