Copper Antioxidant,Industrial Cleaning Agent,Organic Cleaner,Solvent-Based Cleaning Agent AMER TECHNOLOGY CO.,LTD. , https://www.amerlube.com
The complete car body of a sports motorcycle is extremely vulnerable to injury. The handlebar is very narrow. It cannot protect the body when reversing like the street car handlebars and off-road handlebars. The original factory has almost no anti-drop parts. Wrestling pieces.
If you must assign the order according to the importance, the starting ball / rear rocker arm drop should be the first to install. In addition to protecting the rear rocker arm, it can also be used for carriage, which is affordable and is a must-have modification.
The second modification is the front fork drop-proof and engine cover kit (including the engine cover , the motor cover and the clutch cover). The motorcycle shell is a lossy piece. If you drop the cover, there is no on Taobao. Less domestic ABS car shell quality is good, if you are distressed the original car shell, you can buy a new car and change the Taobao car shell to fall.
But the "hardware" of the hood, the frame, the front fork, and the rear rocker are very troublesome. The hood is broken and the oil leaks. The original Yamaha R1's original hood is $500, not counting the installation hours. Fees; you can't change the paint on the front fork or the rear rocker arm, but it won't be difficult to change it.
How to choose the anti-fall modification of motorcycle?
The anti-drop parts of motorcycles should be the first to be considered after most fans buy a car. In certain circumstances, they are really useful for protecting your car. It's worth noting that no matter how strong your anti-drop kit looks, it's impossible for your car to be injured in a crash of 100 kilometers per hour. When the anti-dropping device really works, it is “in-place reversing†and “slow-speed low-fallingâ€. The instability of the two wheels makes the motorcycle always in danger. When the parking is on the floor, there is oil on the ground and the legs are short. Stopped in the parking lot and was touched by someone, maybe it will fall when it is; and the motorcycle is very delicate and fragile. If you reverse the car, you will be injured. The original car shell is 300 dollars.
Among all the types of motorcycles, adventure cars and off-road vehicles are the most fearless. The original anti-fall frame can protect the vehicle well. The side box of the adventure car can be used as two large anti-fall blocks. There are almost no car shells on the NK Street car. The car is most likely to fall into the mirror, and the handlebars are not afraid of falling.
Anti-fall mods for sports motorcycles include: frame anti-drop, front fork drop prevention, kick/back rocker drop prevention, handlebar end drop prevention, engine cover kit , fuel tank drop prevention and exhaust drop prevention . In addition to the fuel tank anti-drop and exhaust anti-fall compared to the chicken ribs (the fuel tank anti-drop is only useful for some models where the Kawasaki fuel tank is particularly prominent to both sides, the exhaust anti-drop is only available for certain models and specific exhaust, it is difficult to buy suitable Other models for your models and exhausts are actually very useful. Frame fall prevention is useful for reducing reverse/slow low drop damage, but the fans have been controversial. Some fans think that the fixed frame anti-drop screw usually replaces the frame/engine connection screw. Once it crashes, the frame anti-fall screw is deformed and the frame may be deformed.
The frame's anti-drop work can prevent the external wear of the vehicle. If the work is not smooth, the frame may be deformed, which is not worth the loss. The car is not equipped with anti-drop glue to prove the correctness of his opinion.
Their arguments have some truth, but today's designers of big-brand frame shatter-resistant have already considered these issues. Good frame shatter-resistant does not cost the frame too long, many manufacturers began to use heavy block design compared to the easy-to-bend stick design. MOTOGP team can make a direct replacement for anything more than money. Naturally, there is no need to install anti-drop. Many cars that run low-level races and most of the track cars are loaded with frame. In general, Xiao Bian believes that the frame can be loaded with anti-drop, remember to install the products of well-known brands.
Putting the end of the handlebar against the last one is not because it is not important, but almost all motorcycles are equipped with a handlebar end to prevent falling, you can completely fall over once and then change the modified parts. After the installation of the full vehicle anti-drop kit, the most ideal state is: put the car side upside down, in addition to the anti-drop parts, no parts of the original car will touch the ground.