Our extrusion Aluminum Sheet widely use in the heat exchange field, for water cooling and liquid cooling area. Size:Customized. Thickness: Customized. Technical: CNC, Welding, Extrusion.Aluminum Extrusion Sheet is limited in size,width around 20cm to 30cm,thickness 10mm,but length can be very long.Bring technology to the ground by material.Material innovation,Trumony Aluminum Limited is always on the road. aluminum extrusion sheet, aluminum extrusion plate, extrusion aluminum sheet, aluminum extrusion panel Trumony Aluminum Limited , https://www.szaluminumtube.com
Features:
1, Integrated machine structure of grade Q235A welding or epoxy resin sand foundry,with annealing and aging treatment,which ensures complete machine high stability.
2,Integrated design of electrical cabinet and machine body makes transportation,installation,operation much easier,and the stability more higher.
3, Equipped with chain type chip removal system,easy for cleaning.
4, It works with high efficient in multi-station processing.
5, X,Y,Z axis max. positioning speeds can reach up to 60m,30m,30m/min.
6, Full protection for cables,guide rails,racks and screws,effectively prevent fragments inside during processing,and greatly improve lifetime of these spare parts.
7,Equipped with automatic lubrication system for rails,which is convenient for maintenance.
8, Equipped with trace atomization cooling or recycle water cooling system, which can effectively protect and improve lifetime of milling drilling tools; equipped with oil-water separator, which can separate lubrication oil and improve lifetime of lubrication fluid.
9, Spindle adopts GELLS brand ( Taiwan ), maximum speed up to 12000Rpm,which makes machine performance and working life much higher than similar products.
10, Tool magazine adopts KUJI brand ( Taiwan ), equipped with 24 tools, neighboring tool change speed is 2.0 seconds .
11, Rigid tapping function makes the process faster and precise.
12, Servo spindle motor can output max. 35.8Nm during low-speed, speed up to 12000rpm, fully suitable for heavy steel, copper and aluminum profiles.
13, It adopts FANUC control system,simple operation, stability, high practicality, while the system configuration tool life management system, to facilitate the life of the tool management.
14, Equipped with oil-water separator,which can separate lubrication oil.
15, Equipped with automatic protective safety door to ensure the safety of equipment operators, while preventing the waste of waste waste.
16,Separately reserved interface for the optional function of the mechanical arm installation. Â
TECHNICAL DATA.
Â
LUBRICATING SYSTEM
Lubricating System
Centralized Automatic Lubrication
Cooling System
Water Cooling System
PRECISION
Position Precision of X Axis
±0.05 mm
Position Precision of Y /Z Axis
±0.01 mm
Repeating Position
±0.01 mm
SIXE OF MACHINE
Power Supply
ACÂ 380VÂ 50Hz
Power
30KW
Air Pressure
0.5MPa - 0.8MPa
Height
2600 mm
Weight
5000 kg~22000KG
Overall Dimension
9300mm×2600mm×2700mm
MAIN COMPONENT CONFIGURATION
Operation System
FANUC 0I MF SYSTEM
Serve Motor
FANUC  β-Series
Spindle Motor
FANUC,7.5KW,High speed:12000 RPM
Spindle
BT40
Tools Magazine
HAND WHEEL INDUSTRYÂ 24 tools magazine TURRET
Guide Rails
Japan THK
Bearings
Japan NSK
Ball Screw
Taiwan TBI C5
Hand wheel
Taiwan
Electrical Parts
France  Schneider
Pneumatic Components
Taiwan  AIRTAC
Reducer
Taiwan  ATG
Water Pump
Shanghai
Guide Rail Lubrication System
Guangdong
Company Introduce
1.PARKER Machinery Co.,LTD was founded in 2003,since the entry into the window door curtain wall machinery manufacturing field,peck with the best team and most stringent manufacturing standards,has been committed to the global supply of machinery and the best service.Today,with more than 300 employees,PARKER Industrial Park covers an area of 70000 m^2,Parker has become Chinese and even the world's window door curtain wall and insulating glass high-end machinery manufacturing base. 2.PARKER products include aluminium,PVC window and doors machinery,aluminium curtain wall processing machinery,industrial aluminium processing machinery and insulating glass series production line machinery. 3.PARKER machinery expotrs to the world more than 80 countries and regions,and has firstly established branches in USA,India,UAE,Brazil,has more than 10 patents. 4.PARKER machinery are all passed through high standard European CE certification,American UL certification and Canadian CSA certification. 5.PARKER manufacturing creates ecological management system of 9M that is unique and most proud of,and the human resources,raw materials,technology methods,environment,information etc. Have been ongoing ascension,and improves the overall quality and core competitiveness of parker.Customers around the world are actively popularize and apply it,benefit a lot from it. 6.PARKER machine core parts procurement achieved internationalization,and established a cooperative partnership with ABBA,OMRON,SCHNEIDER,OPTIMA. 7.PARKER people are always follow the core concept,it is "PARKER is developing with the world",it is PARKER peoples' strict implementation of ecological system of PAREKR and of "zero defect" stern pursuit,which makes the PARKER machine perfect implement unique global standard,achieves improvement value and sustainable innovation! 8.PARKER machinery,leads the era of intelligence,create the strategy of globalization! 9.PARKER machinery,contribution to the world culture of windows and doors!
PARKER Cooperative Partner
PARKER CE Certification
After-sales Service
After-sales Service
Information
After-sales Service 1
If our customers need our company send our engineer to install the machines and train your workers.Our customers should pay for our engineer's round trip tickets, board and lodging during testing and teaching, and subsidy USD60 per day.
After-sales Service 2
On-line Service and All documents and videos for Installation and train operation for free.(For Optional)
Packing &Â Shipping
Title
Information
Packing
Wooden pallet or As customer requirement.
Woodbox for free fumigation
Shipping
Ocean ship  EXW/FOB/CIF
Container or LCL:20 GP/HQ/OTÂ Â Â ORÂ Â 40 GP/HQ/OT
Machine Video-PARKER
https://youtu.be/Jgz6R3BpsIs       Company IntroduceÂ
https://youtu.be/2_LxDXcbAy0     4 axis CNC Machining Center  DMCC82
https://youtu.be/hZVQHP7j7pQ    4 axis Machining Center  DMCC6
https://youtu.be/bi555bYCHkc    Aluminum profile CNC Drilling & Milling Machine DMCC3H
https://youtu.be/WDfGf30R5vc   Heavy Duty CNC Machining Center  DMCC3
https://youtu.be/kYUop0pqmzc    Aluminum Profile CNC Control Double Mitre Saw  E500
https://youtu.be/EA7RhwGSUuY    Aluminum Corner Key Cutting Saw  LJMJ-CNC-500B
https://youtu.be/J3as3R8rKVc      Aluminum Profile Intelligent Cutting Center A9
https://youtu.be/BodrMoiYbBk     Three-axis Any Angle Cutting Saw with CNC  A8-500Â
https://youtu.be/iT7vKgRr9s8Â Â Â Aluminum Corner Crimping Machine LJJZ4-CNC-S1800*3000
 Contact Information
PARKER MACHINERY CO.,LTD,CHINA Contact:Mary---Overseas Sales Manager
Address
9th floor,South of No.9 Building,Shuntai Square,Hi-tech DevelopmentZone,Jinan,Shandong,China
Tel.     Fax.
+86-531-88075288Â Â Â Â Â Â +86-531-88977066
Mobile
+86-13853120161
Web
http://www.parker-chn.com
Industrial Park
Mingjia West Road,Qihe,Shandong,China
Features:
1, Integrated machine structure of grade Q235A welding or epoxy resin sand foundry,with annealing and aging treatment,which ensures complete machine high stability.
2,Integrated design of electrical cabinet and machine body makes transportation,installation,operation much easier,and the stability more higher.
3, Equipped with chain type chip removal system,easy for cleaning.
4, It works with high efficient in multi-station processing.
5, X,Y,Z axis max. positioning speeds can reach up to 60m,30m,30m/min.
6, Full protection for cables,guide rails,racks and screws,effectively prevent fragments inside during processing,and greatly improve lifetime of these spare parts.
7,Equipped with automatic lubrication system for rails,which is convenient for maintenance.
8, Equipped with trace atomization cooling or recycle water cooling system, which can effectively protect and improve lifetime of milling drilling tools; equipped with oil-water separator, which can separate lubrication oil and improve lifetime of lubrication fluid.
9, Spindle adopts GELLS brand ( Taiwan ), maximum speed up to 12000Rpm,which makes machine performance and working life much higher than similar products.
10, Tool magazine adopts KUJI brand ( Taiwan ), equipped with 24 tools, neighboring tool change speed is 2.0 seconds .
11, Rigid tapping function makes the process faster and precise.
12, Servo spindle motor can output max. 35.8Nm during low-speed, speed up to 12000rpm, fully suitable for heavy steel, copper and aluminum profiles.
13, It adopts FANUC control system,simple operation, stability, high practicality, while the system configuration tool life management system, to facilitate the life of the tool management.
14, Equipped with oil-water separator,which can separate lubrication oil.
15, Equipped with automatic protective safety door to ensure the safety of equipment operators, while preventing the waste of waste waste.
16,Separately reserved interface for the optional function of the mechanical arm installation. Â
TECHNICAL DATA.
Â
LUBRICATING SYSTEM
Lubricating System
Centralized Automatic Lubrication
Cooling System
Water Cooling System
PRECISION
Position Precision of X Axis
±0.05 mm
Position Precision of Y /Z Axis
±0.01 mm
Repeating Position
±0.01 mm
SIXE OF MACHINE
Power Supply
ACÂ 380VÂ 50Hz
Power
30KW
Air Pressure
0.5MPa - 0.8MPa
Height
2600 mm
Weight
5000 kg~22000KG
Overall Dimension
9300mm×2600mm×2700mm
MAIN COMPONENT CONFIGURATION
Operation System
FANUC 0I MF SYSTEM
Serve Motor
FANUC  β-Series
Spindle Motor
FANUC,7.5KW,High speed:12000 RPM
Spindle
BT40
Tools Magazine
HAND WHEEL INDUSTRYÂ 24 tools magazine TURRET
Guide Rails
Japan THK
Bearings
Japan NSK
Ball Screw
Taiwan TBI C5
Hand wheel
Taiwan
Electrical Parts
France  Schneider
Pneumatic Components
Taiwan  AIRTAC
Reducer
Taiwan  ATG
Water Pump
Shanghai
Guide Rail Lubrication System
Guangdong
Company Introduce
1.PARKER Machinery Co.,LTD was founded in 2003,since the entry into the window door curtain wall machinery manufacturing field,peck with the best team and most stringent manufacturing standards,has been committed to the global supply of machinery and the best service.Today,with more than 300 employees,PARKER Industrial Park covers an area of 70000 m^2,Parker has become Chinese and even the world's window door curtain wall and insulating glass high-end machinery manufacturing base. 2.PARKER products include aluminium,PVC window and doors machinery,aluminium curtain wall processing machinery,industrial aluminium processing machinery and insulating glass series production line machinery. 3.PARKER machinery expotrs to the world more than 80 countries and regions,and has firstly established branches in USA,India,UAE,Brazil,has more than 10 patents. 4.PARKER machinery are all passed through high standard European CE certification,American UL certification and Canadian CSA certification. 5.PARKER manufacturing creates ecological management system of 9M that is unique and most proud of,and the human resources,raw materials,technology methods,environment,information etc. Have been ongoing ascension,and improves the overall quality and core competitiveness of parker.Customers around the world are actively popularize and apply it,benefit a lot from it. 6.PARKER machine core parts procurement achieved internationalization,and established a cooperative partnership with ABBA,OMRON,SCHNEIDER,OPTIMA. 7.PARKER people are always follow the core concept,it is "PARKER is developing with the world",it is PARKER peoples' strict implementation of ecological system of PAREKR and of "zero defect" stern pursuit,which makes the PARKER machine perfect implement unique global standard,achieves improvement value and sustainable innovation! 8.PARKER machinery,leads the era of intelligence,create the strategy of globalization! 9.PARKER machinery,contribution to the world culture of windows and doors!
PARKER Cooperative Partner
PARKER CE Certification
After-sales Service
After-sales Service
Information
After-sales Service 1
If our customers need our company send our engineer to install the machines and train your workers.Our customers should pay for our engineer's round trip tickets, board and lodging during testing and teaching, and subsidy USD60 per day.
After-sales Service 2
On-line Service and All documents and videos for Installation and train operation for free.(For Optional)
Packing &Â Shipping
Title
Information
Packing
Wooden pallet or As customer requirement.
Woodbox for free fumigation
Shipping
Ocean ship  EXW/FOB/CIF
Container or LCL:20 GP/HQ/OTÂ Â Â ORÂ Â 40 GP/HQ/OT
Machine Video-PARKER
https://youtu.be/Jgz6R3BpsIs       Company IntroduceÂ
https://youtu.be/2_LxDXcbAy0     4 axis CNC Machining Center  DMCC82
https://youtu.be/hZVQHP7j7pQ    4 axis Machining Center  DMCC6
https://youtu.be/bi555bYCHkc    Aluminum profile CNC Drilling & Milling Machine DMCC3H
https://youtu.be/WDfGf30R5vc   Heavy Duty CNC Machining Center  DMCC3
https://youtu.be/kYUop0pqmzc    Aluminum Profile CNC Control Double Mitre Saw  E500
https://youtu.be/EA7RhwGSUuY    Aluminum Corner Key Cutting Saw  LJMJ-CNC-500B
https://youtu.be/J3as3R8rKVc      Aluminum Profile Intelligent Cutting Center A9
https://youtu.be/BodrMoiYbBk     Three-axis Any Angle Cutting Saw with CNC  A8-500Â
https://youtu.be/iT7vKgRr9s8Â Â Â Aluminum Corner Crimping Machine LJJZ4-CNC-S1800*3000
 Contact Information
PARKER MACHINERY CO.,LTD,CHINA Contact:Mary---Overseas Sales Manager
Address
9th floor,South of No.9 Building,Shuntai Square,Hi-tech DevelopmentZone,Jinan,Shandong,China
Tel.     Fax.
+86-531-88075288Â Â Â Â Â Â +86-531-88977066
Mobile
+86-13853120161
Web
http://www.parker-chn.com
Industrial Park
Mingjia West Road,Qihe,Shandong,China
Bt40 CNC Drilling, Milling, Tapping Machine for Metal
Model NO.: BT40
Performance Classification: High-End CNC Machine Tools
Certification: GS, CE, RoHS, ISO 9001
Condition: New
Service: Overseas Service Center Available
Quality Guarantee: 1year
Spindle Speed: 12000rpm
Name: China Milling Manufacturers
Product Name: CNC Drilling Machine
Machine Name: CNC Drilling Machine
Function: Make Water Slot
Appliction One: Aluminum Profile
Appliction Two: Curtain Wall Making
Appliction Three: Window Door Making
Trademark: Parker
Transport Package: Wooden Pallet
Specification: 9300mm× 2600mm× 2700mm
Origin: China
HS Code: 8479819000
Model NO.: BT40
Performance Classification: High-End CNC Machine Tools
Certification: GS, CE, RoHS, ISO 9001
Condition: New
Service: Overseas Service Center Available
Quality Guarantee: 1year
Spindle Speed: 12000rpm
Name: China Milling Manufacturers
Product Name: CNC Drilling Machine
Machine Name: CNC Drilling Machine
Function: Make Water Slot
Appliction One: Aluminum Profile
Appliction Two: Curtain Wall Making
Appliction Three: Window Door Making
Trademark: Parker
Transport Package: Wooden Pallet
Specification: 9300mm× 2600mm× 2700mm
Origin: China
HS Code: 8479819000