Suction vehicle lubricating oil effect

Suction vehicle lubricating oil effect

Suction vehicle lubricating oil effect

Sewage vehicle lubricants have the following effects:

1. Lubrication: The oil film contacts between the surfaces of moving parts to reduce wear of parts and engine power loss.

2. Cleaning function: Use the circulating oil to flush the surface of the parts, remove the worn-out metal chips, and keep the surface of the lubricating parts clean.

3. Cooling: Through the circulation of the lubricating oil, take away the heat generated by the friction and maintain the proper working temperature of the parts.

4. Sealing effect: rely on oil film to improve the sealing effect of the parts. For example, the oil film formed between the piston and the cylinder wall can reduce the air leakage when the piston moves.

5. Anti-corrosion effect: The oil film can prevent the surface of the part from contacting with moisture and air to cause oxidation and rust.

430 Stainless Steel Shot

Longlived 430 Stainless Steel Cut Wire Shot are all produced through German craftsmanship with bright, defect-free and pollution-free material. After strict processing like heat treating, wire drawing, electronic spiral cutting, passivation molding and other processes, our products are strictly in a accordance with German Spring Association standard VDFI8001, German industrial standards DIN8201 and American Aerospace Material Specification Standard. It is widely used for surface shot blasting, sand blasting and shot blasting of stainless steel parts, aluminum alloy die castings, and copper alloy parts. According to different composition, stainless steel is classfied several grades such as 304, 410, 430, 201 and 430 stainless steel Cut Wire Shot is the most popular abrasive of them as its excellent performance. The composition of 430 stainless steeel is: C≤0.12, Cr 16.00-18.00, Ni 0, Mn ≤1.25, P≤0.035, S≤0.030, Si≤0.75. So you can check if 430 Stainless Steel Shot could meet your requirement. Generally 430 stainless tseel cut wire shot could be classfied two kinds. One is as cut and the other is conditioned. Compared with as cut one, conditioned is without sharpe edges and corners and has near round shape. According to this, you can choose the more suitable one.

430 Stainless Steel Shot,Resistance Stainless Steel Shot,Sus430 Stainless Steel Cut Wire Shot,Ss430 Stainless Steel Cut Wire Shot

Longlived Metal Products Co ., Ltd , https://www.longlivedmetalproducts.com