Health epidemic prevention vehicle pictures
Tower Crane spare parts refer to the components and accessories that are used to replace damaged or worn-out parts of a tower crane. Some common tower crane spare parts include: Luffing Tower Crane Parts,L46A1 Mast Section,Crane Fixing Angle,Tower Crane Collar Frame,Tower Crane Parts List SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.syconstructionhoist.com
Epidemic prevention vehicle
The working principle of the hygienic epidemic prevention vehicle The vehicle is mainly used for integrated disinfection to carry out pest control operations and disinfection operations. The pest-free operation is mainly for vehicles other than the vehicle. The disinfection-based operation mainly includes parking, disinfection equipment and insecticidal equipment and automobile system machines. Independent, where the C30 from the low-volume sprayer powered by the device's own battery (US imports) fixed in the rear compartment, and can be removed from the car, mainly for insecticidal, disinfection, AT-405P spray The machine, after installation on the vehicle, is a fixed device equipped with a 50 m x 2 pipeline tray, which is mainly used for large areas of the outdoor environment. The sprayer is equipped with stainless steel liquid tank (4ZOL) corrosion resistance, large drug storage, and easy to use. The car is equipped with Japanese imported generators to prepare for field power and lighting.
The main configuration of health and epidemic prevention vehicles is 1. Carriage: It is an enclosed large-plate heat-retaining compartment structure. It is composed of bottom plate, top plate, left and right side plates, front and rear plates, partition wall plates, etc. The inside and outside edges and corners are connected by rivets to form the whole carriage. , The overall performance is good, and people are equipped with indoor high-power air-conditioning, folding seats, control cabinets, work platforms, storage cabinets, lighting, ventilation valves and fire extinguishers and other extortion and equipment, the upper half of the device can be used to push and pull The utility model can be folded, rainproof, lockable, and can be used to open and close the equipment door, effectively improving the protection ability of the equipment to the external environment, thereby improving the adaptability of the equipment to the external environment, and folding the frame to make the spraying equipment. Fully exposed, easy to eliminate the implementation of the operation, the passenger compartment and the equipment used in the middle of the separation of the glass window can be opened to facilitate the operation of the contact can also effectively prevent the liquid and equipment work, noise to the operator Violations. The back of the rear compartment is equipped with a backward-turning door that can be turned downwards. After the lower position, the limited-position block can be turned on the inside of the door. The rear compartments are open compartments, equipped with multi-purpose sprayers, generators, backup wheels, backup wheel barrels and fire extinguishers, and other internal equipment and facilities; 2, L30 US imports of original ultra-low volume sprayer, rotating ultra-low volume sprayer, the nozzle is controlled by a sealed brushless engine, to ensure a balanced speed and long service life, 90% of the mist particles in the higher than 18 Division (540ml) At a spray rate of less than 20 microns per minute, the nebulizer is anodized and chemically painted, and stainless steel is used to ensure long life and on-board charging. The interface and equipment can also be charged through an external AC power source.
Features of the Sanitary and Immunization Vehicles The power of the Sanitation and Immunization Vehicles produced by our factory is large and the characteristics of the vehicle body are short, so that it can be easily operated and operated when operating in rural areas in multiple towns. The engine is the national III emission standard, and the cab is equipped with original air conditioning. Single bridge flat, open vision, driving comfort, off-road performance. Sprinkler: Adjustable 60 degrees vertical, 360 degrees horizontal. Noise: Nozzle noise> 8dba Spray rate: 1220cfm (34m3/min) Spray distance: more than 30 meters fog particles: 90% less than 20 microns water pump: 591m1/min
1. Hoist motors: These are used to lift and lower heavy loads in a tower crane.
2. Slewing motors: These motors are responsible for rotating the tower crane.
3. Wire ropes: Wire ropes are used for lifting and lowering loads in a tower crane.
4. Safety devices: These include limit switches, load moment indicators, and anti-collision systems, which ensure safe operation of the tower crane.
5. Control panels: These panels include buttons, switches, and control systems that allow operators to control the movements of the tower crane.
6. Hydraulic pumps and cylinders: These components are used to control the movement of the tower crane's jib and trolley.
7. Electrical components: These include circuit breakers, contactors, relays, and fuses, which are essential for the electrical functioning of the tower crane.
8. Bearings: Bearings are used to reduce friction and facilitate smooth movement of various parts in the tower crane.
9. Brakes: Tower cranes are equipped with various types of brakes, including hoist brakes, slewing brakes, and trolley brakes, which help in controlling the movement of the crane.
10. Ladders and platforms: These are used for accessing different parts of the tower crane for maintenance and repair purposes.
Tower crane spare parts are essential for ensuring the smooth operation and maintenance of tower cranes, as they help in replacing worn-out or damaged components and ensuring the safety and efficiency of the crane.
Health and disease prevention vehicle
China Automobile Network Sanitary and Quarantine Vehicles are listed in the China Ministry of Industry and Information Technology, Sanitation and Epidemic Prevention Vehicles Automobile Bulletin All 5 Categories 28 Manufacturers 24 Sanitation and Anti-epidemic Vehicle Brands 127 Kinds of Sanitation and Vaccine Vehicles Product Information, Latest Sanitation and Quarantine Vehicles Announcement, Environmental Notices , fuel announcements, exemption announcements, pictures, news, and the most timely health and epidemic prevention vehicle pricing information. The sanitation and epidemic prevention vehicle is specifically suitable for spraying liquid and powdery sanitation and epidemic prevention medicines. A medicine bin and an ejector are arranged in turn between the front end and the rear end of the vehicle, and a working bin is arranged between the front end and the medicine bin. An electronic control cabinet, a washing machine, an electric motor and a diesel generator set are sequentially disposed between the bin and the rear of the vehicle; the injector is a cylinder structure, a sprayer disk is arranged inside, the back end of the injector is fixed on the medicine bin, and the injector is in the middle The cylinder body and the electric control cabinet are connected through the drive shaft, the front end of the injector extends above the electric control cabinet, the reel-up is arranged on the outside of the diesel generator set, and the medicine gun is connected on the reel. The utility model not only has a large coverage range and a wide spraying direction, but also can atomize the sprayed medicine, fully exert the function of the medicine, and has good health and epidemic prevention effects. [2]