Nowadays, laser cutting equipment is becoming more and more popular, but many users are still not very skilled in the process of using laser cutting machines. The following Dahan lasers will use the five cutting techniques of laser cutting machines to share with everyone. We hope that the majority of users will There is a big help when using a laser cutting machine.
Steam Turbine Spare Parts mainly include Turbine Bearings, Helical Pinion, Worm Gear, Gas Turbine Fasteners, High Pressure Drain Cleaning Nozzle, Turbine Blade, steam turbine filter element,etc.
Jinan Yuanda Power Equipment Co.,Ltd. , https://www.jnyuandaboiler.com
1) The double-focus laser cutting head is a fragile item on the laser cutting machine, which is used for a long time and causes damage to the laser cutting head.
2) Check the straightness of the laser cutting machine's track and the verticality of the machine every six months, and find that it is not normal to maintain and debug in time. Without this, it is possible that the effect of cutting is not very good, and the error will increase, affecting the cutting quality. This is a top priority and must be done.
3) Absorb the dust and dirt from the machine once a week with a vacuum cleaner. All electrical cabinets should be tightly sealed against dust.
4) Always inspect the laser cutting machine belt and make sure it is tight. Otherwise, if something goes wrong during the operation, it may injure people, and it can also lead to death. The steel belt looks like a small thing, and the problem is still a bit serious.
5) Each rail of laser cutting machine should be cleaned regularly to eliminate dust and other impurities, ensure that the normal rack of equipment must be wiped regularly, add lubricating oil, and ensure lubrication without debris. The guide rails must be cleaned and lubricated frequently, and the motor must be cleaned and lubricated on a regular basis. The machine will be able to walk in a better position. More accurate cutting will improve the quality of the cut product. .
The above five points of use skills are summarized in the actual use of the bit by bit, with high operability. Of course, there is still a certain difference between the actual situation and the actual situation. When using it, we have to take into account the actual situation. Everything starts from reality. 
Five tips for using laser cutting equipment
Next Article
Wilson Ships: New Plasma Cutting Machine