Cylinder Repair Kits for DAEWOO Booms and Midarms
Available for DAEWOO Travel Motor Repair Kits
Available for DAEWOO Rotary Motor Repair Kits
Suitable for DAEWOO Tensioner Cylinder Repair Kits
Available for DAEWOO Joystick Repair Kits
Available for DAEWOO Distribution Valve Repair Kits
Available for DAEWOO Pilot Pump Repair Kits
Suitable for DAEWOO Hydraulic Pump Repair Kits
For Daewoo Cylinder Seal Kit,For Daewoo Riser Repair Kit,Riser Repair Kit,Rotary Motor Seal Kit Safe Seal Technology Co., Ltd. , https://www.sprsealkits.com
1. Measuring range: Frequency: 10 ~ 300Hz
Amplitude: 0 to 200um 0 to 500um 0 to 800um (peak to peak)
Intensity: 0 ~ 20mm / s 0 ~ 25mm / s 0 ~ 50mm / s (true RMS)
2. Measurement accuracy: ±0.5, linear error ≤1%FS
3. Measurement method: vertical or horizontal
4. Output signal: current output: 4 ~ 20mA (load ≤ 1KΩ)
5. Ambient temperature: -10 ~ 65 ° C (relative humidity ≤ 85%)
6. Power supply voltage: DC24V (power consumption ≤ 3W)
7. Dimensions: 35 × 75 (mm)
8. Fixed screw hole: M10×1.5×10mm
CD-21SZ-6XT-1 vibration speed sensor
/MLV-9268 Vibration speed sensor can be used to measure various displacements and speeds after being matched with vibration and intensity meter. The rotor supported by the rolling bearing will transmit vibration enough to the bearing seat, and the speed sensor mounted on the bearing housing or very close to the bearing housing, the internal moving coil cuts the magnetic line and outputs the voltage, and provides the signal to the monitoring instrument. Used to predict and alarm mechanical faults. VB-Z410 DTM20-101 Case Vibration Monitoring Meter TM900 Power Converter TM101 Acceleration, Speed, Displacement Vibration Protection Table TM201 Shaft Vibration Transmission Protection Table TM202 Shaft Position Expansion Differential Protection Table TM301 Shaft Vibration Transmission Protection Table TM302 Shaft Position transmission protection table TM501 speed key phase monitoring table TM502 speed key phase monitoring table VIBROCONTROL 800 VIBROCONTROL 868 VIBROCONTROL 869 bearing vibration switch VIBROCONTROL 920 bearing vibration monitor VIBROCONTROL 1000 bearing vibration transmitter VIBROCONTROL 1100 VC 1100 C01 VC 1100 C02 VC 1100 C11 VC 1100 C12 Bearing Vibration Transmitter VIBROCONTROL 4000 VB-410 VB-420 VB-430 CI-411 CI-421 CI-431 Mechanical Protection System VIBROCONTROL 6000 CV
Fan vibration meter vibration sensor CD-21SZ-6XT-
The CD-21SZ-6XT-1 vibration speed sensor can measure various displacements and speeds after being matched with the vibration and intensity meter. The rotor supported by the rolling bearing will transmit vibration enough to the bearing seat, and the speed sensor mounted on the bearing housing or very close to the bearing housing, the internal moving coil cuts the magnetic line and outputs the voltage, and provides the signal to the monitoring instrument. Used to predict and alarm mechanical faults. After the intensity meter is matched, various displacements and speeds can be measured. The rotor supported by the rolling bearing will transmit vibration enough to the bearing seat, and the speed sensor mounted on the bearing housing or very close to the bearing housing, the internal moving coil cuts the magnetic line and outputs the voltage, and provides the signal to the monitoring instrument. Used to predict and alarm mechanical faults. The vibration sensor is used together with the vibration monitor to achieve continuous long-term monitoring and is suitable for measurement of mechanical vibrations such as steam turbines, fans, pumps, and coal mills. The working principle is based on a primary component that converts mechanical energy into electrical energy. It is fixed on the bracket by two coils, and a magnetic steel in the middle is connected to the casing through a spring, and the magnetic steel moves in the line. The magnetic lines of force are cut, thus generating an induced electromotive force. The voltage is proportional to the speed of the casing, which is called the vibration speed sensor. The vibration sensor produced by Zhengzhou Hangke has small volume, good sealing and long service life. Due to the double coil structure, it can superimpose the effective signal, and the interference signal attenuation effectively improves the anti-interference ability.