Chamber Vacuum Dryer Used in Pilot Plant

Chamber Vacuum Dryer Used in Pilot Plant

Model NO.: FZG
Type: Tubular
Material: Stainless Steel
Structure: Chamber
Design and Fabrication Stds.: GB, En
Certification: Ce, GMP, ISO
Condition: New
Trademark: ChangAo
Transport Package: Wooden Box
Specification: FCL
Origin: Changzhou, China
HS Code: 8419399090
It is well known that vacuum drying is to make raw materials be the state of vacuum by heating and drying. Use vacuum pump to suck the air and exhaust moisture, and the drying speed will be faster.

Notes: If using condenser, the solvent in raw materials can be recovered. If using SK series water ring vacuum pump or ZSW series hydraulic injection vacuum pump sets, there is no need to use the condenser and the investment can be saved.

It is suitable for drying heat sensitive raw materials that will decompose, polymerize and metamorphose at high temperature. It is widely used in pharmaceutical, chemical, foodstuff and electronic industries.

Features:
1. Under the vacuum, the boiling point of raw materials will decrease and materials can be heated more uniformly.
2. Heat source: low pressure steam, conduction oil, electricity and hot water.
3. The heat loss of evaporator is less.
4. Before drying, the disinfection can be carried out. During the period of drying, there are no impure materials mixed. It is conformity with the requirement of GMP.
5. It belongs to a kind of static dryer. So the shape of raw materials to be dried will not be destroyed.

Technical Specification:
    Spec.
Name		 YZG-600 YZG-1000 YZG-1400 FZG-15
Inner size of drying chamber (mm) φ600×976 φ1000×1527 φ1400×2054 φ1500×1400×1220
Outer size of drying chamber (mm) 1135×810×1020 1693×1190×1500 2386×1675×1920 1513×1924×2060
Layer of drying rack 4 6 8 8
Distance between layers (mm) 81 102 102 122
Size of baking tray (mm) 310×600×45 250×410×45 400×600×45 480×630×45
Quantity of baking tray 4 24 32 32
Operating pressure in the pipe of drying rack (MPa) ≤0.784
(8kg/cm2)		 ≤0.784 ≤0.784 ≤0.784
Operating temperature of drying rack (ºC) -35~+150 -35~+150 -35~+150 -35~+150
Vacuum in chamber at empty load (Pa) 1333 (10 torr) 1333 (10 torr) 1333 (10 torr) 1333 (10 torr)
Under 0.1MPa and 110ºC, vaporization rate of water (kg/m2·h) 7.2 7.2 7.2 7.2
When using condenser, model and power of vacuum pump (kw) 2X-15  2kw 2X-30 A  3kw 2X-70A  5.5kw 2X-70A  5.5kw
When not using condenser, model and power of vacuum pump (kw) JZJS-70 7kw JZJS-70 7kw JZJS-70 7kw JZJS-70 7kw
Weight of dryer (kg) 250 800 1400 2100

Company Profile:
Changzhou Aokai Drying Equipment Co., Ltd. was established in 2004, and is specialized in the design, manufacturing and development of the drying, calcination, cooling, crushing, mixing and granulating equipment. Aokai is located in Benniu Town Xinbei District of Changzhou City, close to Beijing-Shanghai Railway, Shanghai-Nanjing Expressway and Changzhou Airport.

The company has 4 modern standard workshops, about 13600 m2. There are 15 mid-level and senior engineers. It has more than 80 sets of processing devices and its annual production capacity can be more than 500 sets with over 30 categories. The company can provide dryer, solutions and service according to GMP, cGMP and FDA certification.

The company has obtained the certification of "National High-Tech Enterprise", been the member of China Pharmaceutical Equipment Industry Association. Also, the company has passed ISO9001:2008 Quality Management System Certification, ISO14001:2004 Environmental Management System Certification and many other certificates as well as 20 more core technologies getting patent certificates.

For a long time, the company focuses on the scientific and technological innovation, always persists in the technology upgrading as the core, and takes the optimizing of the product structure as the development direction. The company has a professional technical team to cooperate with some scientific and research institutes to develop new products, absorbs and digests advanced technologies from China and overseas, continues to explore various patent technologies to widely used in the fields of chemical, pharmaceutical, foodstuff, pigments, new materials and military industries. Aokai has already stepped into the international market and established a good reputation.

With the development, the company has accumulated strong capital and technical strength, created an intelligent and harmonious team. The company has a pilot plant with many types of testing machine for customers to do test and select suitable models.

Aokai sincerely welcome the majority of insight to make great achievement together. Also warmly welcome to Aokai.

FAQ:
1. Q: Please describe your warranty period.
    A: 15 months after the equipment is arrived at the destination port or 12 months after   the installation and commissioning of the equipment, whichever comes first.

2. Q: Do you provide on-site installation and commissioning?
    A: Yes, we do. If on request, we'll provide the guidance of on-site installation and commissioning. Usually one mechanical engineer and one electrical engineer to assist.

3. Q: How about the cost of on-site installation and commissioning guidance?
    A: The cost consists of round-trip air tickets, room and board expenses, service cost (labor cost), and site transportation (or directly provided by client), which shall be paid additionally.

4. Q: Are you a factory or a trading company?
    A: We are a professional manufacturer. We have a pilot plant for customers to do sample testing. 












 

Iron Wire

Iron Wire,Galvanized Iron Wire,Galvanized Iron Barbed Wire,Galvanized Double Looped Tie Wire

Haotian Hardware Wire Mesh Products Co.,Ltd , https://www.htmeshfencing.com

Next Article
Prev Article