Product Profile Large energy saving ceiling fans are green energy saving products of the 21st century. It has many advantages, such as powerful, no noise, zero pollution, low energy consumption. It is very popular for large masses of users. It is not only mainly used in steel structure plant, logistics warehouse, farm and other large enterprise buildings, but also agricultural markets, gymnasiums, waiting rooms, exhibition halls and other large public buildings. A large energy-saving ceiling fans with a speed of 50 revolutions per minute 1 to 3 meters per second to make the human body feels the best wind speed. A breeze from all directions gently caresses the body and increases the evaporation of human sweat. The cooling effect of 5 to 8 degrees is similar to the comfort presented by the natural breeze, which can not be matched by other fans. It is an ideal choice for indoor, ventilation and cooling in summer to remove humidity and heat. Only seven degrees of electricity per day, it can be cool for a whole summer. Energy saving comparation In summer, the sun shines directly and the indoor temperature is more than 40 degrees on average. Common industrial exhaust fans can only increase the indoor temperature. Industrial air conditioners consume thousands of kilowatts of energy every shift. There is no obvious unenclosed cooling in the space, which also increases the operating cost of enterprises. The emergence of a large energy saving ceiling fan brought the perfect solution. An energy saving fan with a diameter of 7.2meters can push the air to produce a large amount of winds effectively. The continuously rotating blades of circular form an airflow field with an effective area of 600 to 800 square meters. No other device has not yet been compared. The large energy-saving ceiling fan praduced by Linter technology has the characteristics of high reliability, feasibility and low power consumption. The controller unit used the stability of the energy-saving inverter system. In practice, the average power consumption is less than one killowatt per hour. It can guarantee more than 5,000 hours of uninterrupted operation. Linter7200 of a large energy-saving ceiling fan can cover the area of about 50 small fans of 0.75 megabytes worked. In a factory of 9000 square meters, if full coverage is to be achieved, it needs about 300 small fans or industrial 6 energy-saving fans. According to the use of four years, every eight months, every day for ten hours, can be run for 10,000 hours, about 90000kw power consumption, than the small wind 1080000kw, save 990000kw, save energy by 92%. When meeting the extreme high temperature climate, the large energy saving fans and air conditioners are used together, it will be coller. Using A large energy-saving ceiling fan for air supply can not only save the air conditioning tube, but also save more than 30% energy. Attentio Lectotype The building structure: H-shaped steel, I-shaped steel, Mixed steel square bar spherical column spherical structure. The total height of the building is more than 4, 0m, less than 15m. 1, 0m. The minimum distance between the fan and the roof is 1, 0m. The minimum safety distance between the fan blades and the obstacle is 0, 3 m. The distance between the fan blades and the wall on both sides is more than 1, 5 m. Effects of various environments on fan performance. Open space, promotes air circulation. Indoor airflow circulation in enclosed spaces is suitable for use with air conditioning. In a multi-fan environment, due to the low wind speed, caused by the fan, there will be no cyclones. The distance between the two fans will be separated before the wind will not cancel, and the coverage area will be increased at the same time. Company Information HongFa automatic door Technology (Shenzhen) Co., Ltd is a high-tech enterprise which engages in the development of advanced world-class automatic doors. Our main products include industrial fast rolling door, industrial PVC rolling door, industrial PVC rolling door, fast rolling door, rolling door, fast rolling door, rolling door, industrial automatic lifting door, industrial automatic lifting door, automatic vertical hinged door, automatic stainless steel door, automatic doors, automatic doors, electric folding gate, rolling door, automatic doors, automatic doors, automatic doors, automatic doors,
Industrial ceiling fan,electric fan,industrial fan SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , http://www.hongfarrd.com
The DELUX series 2IN1 TIG/MMA inverter welding machine is MOSFET type welder with genius design. It is powerful, lightweight and perfect power solutions for those jobs that need a little more grunt. True DC inverter technology is utilized in the most efficient way possible to combine two machines into one innovative unit, capable of smooth accurate work with perfect stability.
This awesome multi TIG welds all ferrous metals such as mild steel, stainless steel, chrome moly, etc. The MMA/Stick welding function allows you to run up to a 4mm rod with perfect stability of the ARC.
Without a doubt, the DELUX WSM model is in a league of its own, packed with superior features. The WSM model incorporates the latest High Frequency Inverter Technology producing the highest quality results in both electrode and TIG welding with complete reliability.
The DELUX series 2IN1 TIG/MMA inverter welding machine is the ultimate choice for DIY, homeworking, light industrial, site welding, repairing, etc. What's more, it is 100% generator friendly, you can use it with generator power station outdoor, weight in at only 10kg! Very handy for go anywhere.
Meanwhile, the machine is approved by CE certificate and fully compliant with mandatory EMC regulation.
SPECIFICATION:
Â
Model: WSM-170
Rated input Voltage: AC~230V
Rated Input Power: 6.5KVA
Friendly Generator Power: >12KW
Frequency: 50/60Hz
Non-load Voltage: 65V
Duty Cycle: 60%@170A
EFFICIENCY: 85%
Class of Insulation: F
Case Protection Degree: IP21
Power Plug: 10A
----------------------------------------
Rated output current MMA: 170A@60% ; 100A@100%
Current Range MMA: 20~170A
----------------------------------------
Rated output current TIG: 170A@60% ; 100A@100%
Current Rage TIG: 20-170AAccessory:
1) Electorde Holder with 1.8m cable
2) Earth Clamp with 1.2m cable
3) Foldable mask
4) Chipping Hammer & Brush
6) TIG TORCHOption:
- BMC BOX for easy-carry & safe-storageSize & Weight:
- Product Weight: 9 kg
- Product Dimensions (W x L x H): 400 x 200 x 235 mm
WHY DECAPOWER ?
> DELIVERY ON TIME.
> EXTENSIVE PRODUCT RANGE.
> GREAT RETUPATION
> RESPONSIBLE AND RESPONSIVE CUSTOMER CARE.
> OUR AFTER-SALES SERVICE BRINGS YOU A PEACE OF MIND.
> CUSTOMIZED PRODUCTION IS AVAILABLE.
> SUPPLY FOR OEM AND AFTER MARKETS.
> QUALITY ASSURANCE FROM RAW MATERIAL.
> 100% TESTED FOR THE ACCURACY AND QUALITY PIROR TO SHIPMENT.
Quality & Engineering:
DECAPOWER delivers consistent quality from our ISO9001 certified manufacturing facilities that you can rely on every turn. Our application-specific engineers and dedicated R&D team are able to tailor solutions for optimal performance and value.
Â
The DELUX series 2IN1 TIG/MMA inverter welding machine is MOSFET type welder with genius design. It is powerful, lightweight and perfect power solutions for those jobs that need a little more grunt. True DC inverter technology is utilized in the most efficient way possible to combine two machines into one innovative unit, capable of smooth accurate work with perfect stability.
This awesome multi TIG welds all ferrous metals such as mild steel, stainless steel, chrome moly, etc. The MMA/Stick welding function allows you to run up to a 4mm rod with perfect stability of the ARC.
Without a doubt, the DELUX WSM model is in a league of its own, packed with superior features. The WSM model incorporates the latest High Frequency Inverter Technology producing the highest quality results in both electrode and TIG welding with complete reliability.
The DELUX series 2IN1 TIG/MMA inverter welding machine is the ultimate choice for DIY, homeworking, light industrial, site welding, repairing, etc. What's more, it is 100% generator friendly, you can use it with generator power station outdoor, weight in at only 10kg! Very handy for go anywhere.
Meanwhile, the machine is approved by CE certificate and fully compliant with mandatory EMC regulation.
SPECIFICATION:
Â
Model: WSM-170
Rated input Voltage: AC~230V
Rated Input Power: 6.5KVA
Friendly Generator Power: >12KW
Frequency: 50/60Hz
Non-load Voltage: 65V
Duty Cycle: 60%@170A
EFFICIENCY: 85%
Class of Insulation: F
Case Protection Degree: IP21
Power Plug: 10A
----------------------------------------
Rated output current MMA: 170A@60% ; 100A@100%
Current Range MMA: 20~170A
----------------------------------------
Rated output current TIG: 170A@60% ; 100A@100%
Current Rage TIG: 20-170AAccessory:
1) Electorde Holder with 1.8m cable
2) Earth Clamp with 1.2m cable
3) Foldable mask
4) Chipping Hammer & Brush
6) TIG TORCHOption:
- BMC BOX for easy-carry & safe-storageSize & Weight:
- Product Weight: 9 kg
- Product Dimensions (W x L x H): 400 x 200 x 235 mm
WHY DECAPOWER ?
> DELIVERY ON TIME.
> EXTENSIVE PRODUCT RANGE.
> GREAT RETUPATION
> RESPONSIBLE AND RESPONSIVE CUSTOMER CARE.
> OUR AFTER-SALES SERVICE BRINGS YOU A PEACE OF MIND.
> CUSTOMIZED PRODUCTION IS AVAILABLE.
> SUPPLY FOR OEM AND AFTER MARKETS.
> QUALITY ASSURANCE FROM RAW MATERIAL.
> 100% TESTED FOR THE ACCURACY AND QUALITY PIROR TO SHIPMENT.
Quality & Engineering:
DECAPOWER delivers consistent quality from our ISO9001 certified manufacturing facilities that you can rely on every turn. Our application-specific engineers and dedicated R&D team are able to tailor solutions for optimal performance and value.
Â
Ce Approved Wsm MMA Welding Machine Inverter TIG Welder>
Model NO.: WSM-170
Input Voltage: 230V
Input Power: 5.5kw
TIG Current: 20-170A
MMA Current: 20-170A
Duty Cycle: 60%
Efficiency: 85%
Insulation Class: IP21s
Trademark: DECAPOWER
Transport Package: Carton
Specification: 400X200X235MM
Origin: Taizhou, China
HS Code: 8413190000
Model NO.: WSM-170
Input Voltage: 230V
Input Power: 5.5kw
TIG Current: 20-170A
MMA Current: 20-170A
Duty Cycle: 60%
Efficiency: 85%
Insulation Class: IP21s
Trademark: DECAPOWER
Transport Package: Carton
Specification: 400X200X235MM
Origin: Taizhou, China
HS Code: 8413190000
Next Article
Dry Ball Mill/Raw Mill/Ball Mill Equipment
Prev Article
External gear pump structure and working principle