Mechanical Ball Float Water Level Exhaust Manual Directional Control Valve

Mechanical Ball Float Water Level Exhaust Manual Directional Control Valve

Type: Single Seater
Model No.: 100X
Trim: Stainless Steel
Seat: Ss / Bronze
Pipes/Tubes: Copper or Stainless Steel
Coating: Epoxy Resin Coated to 300 Micro
Body: Ductile Iron, Stainless Steel
Diaphgram: Nylon+EPDM/Viton
Seal Rings: NBR/EPDM/Viton
Trademark: Walter
Transport Package: Bubble Bags and Wooden Case
Specification: Pn10/16/25
Origin: Suzhou, Jiangsu
HS Code: 8481801090
Type: Single Seater
Model No.: 100X
Trim: Stainless Steel
Seat: Ss / Bronze
Pipes/Tubes: Copper or Stainless Steel
Coating: Epoxy Resin Coated to 300 Micro
Body: Ductile Iron, Stainless Steel
Diaphgram: Nylon+EPDM/Viton
Seal Rings: NBR/EPDM/Viton
Trademark: Walter
Transport Package: Bubble Bags and Wooden Case
Specification: Pn10/16/25
Origin: Suzhou, Jiangsu
HS Code: 8481801090
Float Control Valve or Flow Level Control Valve is a non-modulating valve, that accurately controls the liquid level in water tanks.,

1. Body/Bonnet: GGG50 or Stainless Steel

2. Spring: SS304

3. Stem: SS / Bronze

4. Disc Retainer: DI/SS/Bronze

5. Seat: SS/Brass/Bronze

6. Seal Rings: NBR/EPDM/Viton

7. Pilot: Stainless Steel or Brass

8. Pipe or Tubes: Coppe or Stainless Steel

9. Working Pressure: PN10/16/25

10. Connection: Flanged acc. to EN1092.2, ISO 7005-2, ANSI/JIS/ AS2129

11. Epoxy Resin Coated to 300 microns inside & outside

12. Anti-cavitation Solution
Mechanical Ball Float Water Level Exhaust Manual Directional Control Valve



Mechanical Ball Float Water Level Exhaust Manual Directional Control Valve

  Float Control Valve or Flow Level Control Valve is a non-modulating valve, that accurately controls the liquid level in water tanks.,

1. Body/Bonnet: GGG50 or Stainless Steel

2. Spring: SS304

3. Stem: SS / Bronze

4. Disc Retainer: DI/SS/Bronze

5. Seat: SS/Brass/Bronze

6. Seal Rings: NBR/EPDM/Viton

7. Pilot: Stainless Steel or Brass

8. Pipe or Tubes: Coppe or Stainless Steel

9. Working Pressure: PN10/16/25

10. Connection: Flanged acc. to EN1092.2, ISO 7005-2, ANSI/JIS/ AS2129

11. Epoxy Resin Coated to 300 microns inside & outside

12. Anti-cavitation Solution
Mechanical Ball Float Water Level Exhaust Manual Directional Control Valve



Mechanical Ball Float Water Level Exhaust Manual Directional Control Valve

 

Pvc Gabion

All wire used in the fabrication of the gabions and in the wiring operations during construction shall, after galvanising, have extruded on to it a coating of polyvinyl chloride, or [PVC."

The coating shall be grey in colour, shall have an average thickness of 0.55 mm and nowhere be less than 0.40 mm in thickness and shall be capable of resisting eleterious effects of natural weather exposure, immersion in salt water and shall not show any material difference in its initial properties listed below:

Pvc Gabion,Pvc Gabion Baskets,Pvc Coated Gabion Box,Pvc Coated Gabion

ANPING HAOCHANG WIRE MESH MANUFACTURE CO.,LTD , https://www.hcgabions.com

Next Article
Prev Article