Ps Foam Sheet Extrusion Line,Ps Foam Sheet Extrusion Machine,Ps Foam Sheet Extruder,Extruder Machine haiyuanmachinery , https://www.foamfoodboxmachine.com
1. Preheating temperature: Dry laying can save more than 200% of time compared with wet laying.
2. Dry-laid main materials are: slotted extruded plate, slotted aluminum plate, floor heating pipe, and aluminum tape; dry laying adopts grooved aluminum plate to transfer more than 200% of wet deposition, so as to achieve rapid heating effect.
3. Fuel usage: Dry laying saves 42.5% fuel cost compared to wet laying. Wet-laid concrete heating methods generate heat at 45 to 65 degrees; dry laying produces the same amount of heat at water temperatures of 40 to 45 degrees.
4. Construction period: Wet construction will be completed in two days, plus 3 days of coagulation period; Dry construction will be completed on the same day.
5th, thickness: The wet laying includes the concrete about 5 centimeters to add the wooden floor thickness; The dry laying hidden in the floor form does not affect the room height space.
6. Maintenance and renovation: Inconvenient in terms of wet-laid renovation; dry-laying is easy to modify, easy to modify during the next renovation, and can also be removed and moved to another place. The air is then formed under the effect of the difference in the proportion of hot and cold air. Natural convection creates an indoor thermal microclimate with an ideal temperature distribution, which makes the indoor environment reach the most comfortable state of human senses. The floor heating system has uniform heat dissipation and high thermal efficiency. The room temperature can be adjusted through a thermostat, and the machine can be turned on and off at regular intervals according to the family life rules and rhythm.
7. Installation conditions: All the parts of the floor heating system are buried under the floor. The surface can not only be laid with stone and floor tiles, but also can be used for laying composite floors. So the ground will rise 5 to 6 centimeters, but generally it will not affect the entire decoration. Solid wood flooring is a natural wood that contains a certain amount of water. Once heated, changes in the moisture content of the wood floor can cause deformation, and if the interior is not well ventilated, it can easily cause cracking of the floor. Composite floor because the hardness is stronger than the solid wood floor, after the formation of reconstructed, there are plastic components, there is no deformation and cracking problems. Tiles and stone are conducive to heat dissipation, there is no cracking deformation, so it is recommended that everyone choose to install floor heating when the best choice of composite wood flooring or floor tiles, stone.
Floor heating method and its characteristics
After years of development, the floor heating method has been very mature, and its use rate in the south is relatively high. Compared with the wet-laid method, the dry-laid method is more advantageous. The following is a simple introduction of the floor-to-floor warm dry-laid method and its features by the Shanghai Floor Heating Company.
Next Article
Compression garbage truck performance introduction
Prev Article
Where to go From here to the end