Evaporation Humidifier,Cool Mist Evaporative Humidifier,Ultrasonic Room Air Humidifier,Desktop Cool Mist Humidifier Leeyo Pilot Electric Technology Co., Ltd , https://www.leeyo-pilot.com
1. Measuring range: Frequency: 10 ~ 300Hz
Amplitude: 0 to 200um 0 to 500um 0 to 800um (peak to peak)
Intensity: 0 ~ 20mm / s 0 ~ 25mm / s 0 ~ 50mm / s (true RMS)
2. Measurement accuracy: ±0.5, linear error ≤1%FS
3. Measurement method: vertical or horizontal
4. Output signal: current output: 4 ~ 20mA (load ≤ 1KΩ)
5. Ambient temperature: -10 ~ 65 ° C (relative humidity ≤ 85%)
6. Power supply voltage: DC24V (power consumption ≤ 3W)
7. Dimensions: 35 × 75 (mm)
8. Fixed screw hole: M10×1.5×10mm
VS-068/VS-069/vibration speed sensor
HY-3V intelligent vibration monitoring and protection instrument, HY-3S intelligent speed monitoring and protection instrument, HY-3D intelligent travel monitoring and protection instrument, HY-5V intelligent vibration monitoring and protection instrument, HY-5S intelligent speed monitoring and protection instrument, HY-5D intelligent travel Monitoring and protection instrument, HY-6000 rotating machinery monitoring and protection combined device, HY-3500 steam turbine monitoring and protection combined device, HY-8500 vibration monitoring and fault analysis system, HY-VT vibration transmitter, HY-DT travel transmitter, HY -ST speed transmitter, VS-2 vibration speed sensor (magnetoelectric), VS-2 vibration speed sensor (piezoelectric), RS-1 speed sensor (passive), RS-1 speed sensor (active), RS -3 anti-speed sensor, CWY-DO point eddy current sensor, TD UT stroke sensor, UHZ-54 level sensor
Fan vibration meter vibration sensor VS-068/VS-069/
The VS-068/VS-069/vibration speed sensor, vibration sensor and vibration monitor can be used for continuous long-term monitoring and is suitable for measurement of mechanical vibrations such as steam turbines, fans, pumps and coal mills. The working principle is based on a primary component that converts mechanical energy into electrical energy. It is fixed on the bracket by two coils, and a magnetic steel in the middle is connected to the casing through a spring, and the magnetic steel moves in the line. The magnetic lines of force are cut, thus generating an induced electromotive force. The voltage is proportional to the speed of the casing, which is called the vibration speed sensor. The vibration sensor produced by Zhengzhou Hangke has small volume, good sealing and long service life. Due to the double coil structure, it can superimpose the effective signal, and the interference signal attenuation effectively improves the anti-interference ability.