Butterfly Valves,Wafer Butterfly Valve,Flange Butterfly Valve Pingyi Lu Petroleum & Oil Fittings Co., Ltd. , http://www.bdgatevalve.com
1. The sprinkler sprinkler is not filled with enough liquid or liquid in the pump body. 2. Sprinkler car sprinkler pump suction pipe leaks. 3. Sprinkler car sprinkler pump speed is too low. 4. Sprinkler car sprinkler pump suction is too high or the suction pipe is blocked. Sprinkler Sprinklers Mechanical Spill Defective Sprinklers Sprinklers Water Pump Excluding Methods:
1. Add enough fluid 2. Check and eliminate leaks 3. Adjust the rotation speed 4. Reduce the suction stroke or shorten the suction line 5. Repair or replace the sprinkler.
1. Impediment to the flow path of the impeller or suction pipe 2. Abrasive wear of the impeller or impeller seal ring 3. Low power and low speed 4. Inlet or outlet valve is not fully opened Sprinkle car Sprinkler pump Exclusion method:
1. Elimination of blockages 2. Replacement of the mouth ring 3. Increase the full horsepower to adjust the speed 4. Open the inlet or outlet valve Sprinkler Sprinkler shaft Power consumption is too high Cause:
1, the flow is too large 2, the speed is too high 3, the pump shaft twists or the impeller bump 4, the pump flow channel is blocked or stuck sprinkler sprinkler pump exclusion method:
1. Reduce flow 2. Decrease properly 3. Correct or replace 4. Elimination of blockages Sprinklers Sprinklers Noise Larger Vibrations Causes:
1, unstable foot 2, cavitation 3, bearing wear is serious 4, sprinkler car sprinkler pump is blocked or stuck in the flow channel 5, sprinkler sprinkled water pump or imported pipe debris, sprinkler car sprinkler and Power Machines Spindles of Different Spindles Sprinklers Discharge Method:
1. Reinforcement 2. Condition adjustment 3. Replacement of new bearings 4. Calibration or replacement 5. Removal of debris 6. Adjustment of concentricity Sprinklers Power take-off box Description Sprinklers currently use Dongfeng to release the series of power take-offs, pneumatically operated, The operating switch pulls back, takes the force tooth into the mesh position, drives the water pump to work through the drive shaft, the switch back to the position, the water pump stops working.
Sprinkler sprinkler function description:
The sprinkler is equipped with a duck-shaped nozzle or a round-headed punching nozzle, a cylindrical open-spray nozzle or a showerhead nozzle at the back, and a working platform at the rear, equipped with a water cannon. 8 nozzles at the rear (optional)
The water sprayer is generally used for flushing the street and plays a role of dust removal and cooling. The water sprayer can change the spraying direction and angle of the water sprayer by adjusting the nozzle thread. The water spray gun can be used for urban and rural landscape greening and emergency firefighting. Lian Peng mouth can be poured down the middle of the road to the dust from the sprinkler, play a role in cleaning the air.
Daily maintenance and maintenance of sprinkler pumps>
Sprinkler Sprinklers cannot self-prime Cause: