Introduction: The AG-60 aerosol generator is the only durable and lightweight Laskin nozzle dust collector that can switch between the two models. It only requires a suitable voltage source to produce a polydisperse submicron suspension. Particles; can also choose an external gas source, so that the amount of fog increases by three times. Source: Suzhou Tenno Electronic Technology Co., Ltd. Hs Compressor,Hs Air Compressor,Hs Ac Compressor,Hs Auto Ac Compressor NINGBO BOWENTE AUTO PARTS CO., LTD , https://www.autorefrigerationparts.com
The AG-60 aerosol generator is a portable Laskin nozzle type dust generator manufactured by Suzhou Nuoda. It can generate sub-microns in airflows from 50 to 4725 cubic feet per minute with concentrations of 10 to 100 micrograms per litre. Suspended Particles. All Laskin nozzle spray dusters feature durable stainless steel construction, large fill ports, independent nozzle control, pressure control and standard clean joint outputs.
AG-60 aerosol generator main main technical parameters:
Airborne particle output range:
50 - 2,000 cubic feet per minute (1.4-56.6m3/min) Two-step adjustment of the internal pump
50 - 6,053 cubic feet per minute (1.4-171.7m3/min) External air source two-speed adjustment
Suspended particle concentration: 100 μg/l at 605.3 cubic feet per minute
Suspended particle concentration: 10 μg/L at 6053 cubic feet per minute
Production Type: 1-4 nozzles (2 to 18 Laskin Nozzle nozzles)
Occurrence particles: PAO, DOP, polydisperse
Compressed air:
1, power mode: built-in air pump, no external air supply
2. External air source: The amount of fog can increase three times.
Gas Type: Multiple Diameter Particles (Cold)
Size: (37cm L* 26cm W *23cm H)
Weight: 15.5 KG
Power supply: 220 VAC / 50Hz
The AG-60 aerosol generator has 4 Laskin nozzle heads. When it is at 20 psig pressure the entire output is diluted with 607.5 cubic feet of air, the concentration of the gas is close to 100 micrograms per liter. The built-in regulating valve can be adjusted to 1- Four nozzles produce dust, providing a wide range of gas concentrations.
The AG-60 aerosol generator is ideal for fogging systems in systems with a flow rate of 6,075 cubic feet per minute or less, and is mainly used for negative pressure filtration units, biological safety cabinets, small or mobile clean units, or HEPA filtration. Unit.
You don't understand the AG-60 aerosol generator>