Lathes are divided into horizontal lathes and vertical lathes. The horizontal lathe spindle is on the left side of the machine and the flat bed is used for axle and disc parts. The vertical lathe spindle is located above the bed and is used to process large parts of the vehicle's brake hubs. The biggest difference lies in the main shaft. Vertical means that the main shaft is upright, and horizontal means that the main shaft is lying horizontally. Because the weight of the workpiece when the vertical lathe is working is directly loaded on the workbench, the workbench again disperses the weight on the bed. Therefore, the vertical lathe has a large load capacity and good rigidity, and is suitable for processing large-scale, large diameter, and small length. Workpieces, such as discs, wheels, gear blanks, etc. On the chuck of the horizontal lathe, the workpiece is clamped again, and the load is transmitted to the main shaft. The two main bearings of the front and rear are used to bear the load. Therefore, the bearing capacity is small and the rigidity is also poor. However, horizontal lathes are convenient to observe and operate, so they are suitable for machining small and medium-sized roulettes and shafts. Hook For Brother,Sewing Machine Parts For Jack,Sewing Machine Parts,Hook For Brother He-800A sewshimano , https://www.nb-fzysewing.com
The difference between vertical lathes and horizontal lathes
Prev Article
"Market and explore"