Tower Crane gear mainly including 19/38/99 teeth gear, bevel gear, Tower Crane Sun Gear, and so on, which are the critical
parts of the tower crane reducer. 19 teeth gear and 38 teeth gear are
connected with two motor shaft repectively, which are connected with 99
teeth gear. The speed is reduced by the transmission of gears.
A bevel gear is a type of gear that has teeth cut on a conical surface. It is commonly used in tower cranes to transmit power between the vertical and horizontal shafts. Bevel Gear,Tower Crane Sun Gear,Crane Pinion Gear,Tower Crane Transmission Gear,Tower Crane Drive Shaft SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sytoplesstowercrane.com
Pneumatic fittings are used in pneumatic piping. The tube fittings come in a wide variety 
of models to meet all your needs in pneumatic piping. Even after installation, the direction of the tube can be changed freely
Spe.
Â
Â
4
8
16
5
10
1/4
6
12
3/8
7
14
5/16
Nickel-palted metal body ensures anti-corrosion and anti-contamination. All R and NPT threads are pre-coated sealant.
Features:
1)Accurate regulation of an optimal air flow rate for precise motion control
2)Elliptical release ring help to connect the tube easily by manual, no special tools required.
3)(Nickel-plated )brass threaded bodies ensures anti-corrosion and anti-contamination.
4)All threads are pre-coated with Teflon sealant and require no additional sealing.
Technique information:
Medium: Air and Water
Working Pressure: 0~150PSI
Working Temperature: 0-60C(32~140F)
Air tube connected: Nylon and Polyurethane.Â
In a tower crane, the bevel gear is typically used to change the direction of rotation. The vertical shaft, which is connected to the motor, rotates vertically, while the horizontal shaft, which is connected to the crane's boom, rotates horizontally.
The bevel gear consists of two gears with intersecting axes. The teeth on the gears are cut at an angle, allowing them to mesh smoothly and transmit power. The gear ratio of the bevel gear determines the speed and torque of the rotation.
The bevel gear in a tower crane is designed to withstand heavy loads and provide efficient power transmission. It is usually made of high-strength steel to ensure durability and reliability in demanding crane operations.
Overall, the bevel gear plays a crucial role in the functioning of a tower crane by enabling the transfer of power and changing the direction of rotation between the vertical and horizontal shafts.
Pneumatic Push in Fitting, Brass Fitting