3 In 1 Servo Feeders 4 in 1 Straightener Feeders, Sheet Metal Feeding Equipment,Uncoiler System Feeder Straightener, 3 in 1 Press Feeding Mayflay Machinery(huizhou) Co.,LTD , https://www.pressfeeders.com
--Measuring the volume of cold potable water passing through the pipeline.
Feature:
--Single-jet, dry-dial, free rotating register, small in size and light in weight;
--Magnetic drive, Resistance to exterior magnet interference,
--keep the reading clear in a long term service;
Note:
--Measuring accuracy conform to ISO 4064 class B standard...
--Available with different length on request. Available in hot water meter on request.
Working condition:
--Water temperature: 0.1~40 ( 0.1~90 for hot water meter)
--Water pressure: ≤ 1.0Mpa
Maximum Permissible Error:
(1) in the lower zone from qmin inclusive up to but excluding qt is ± 5%
(2) in the upper zone from qt inclusive up to and including qs is ± 2%
Hot water meter ± 3%
Type
Size Â
(mm)Class
qs
Overload
Flowqp   Permanent         Flow
qt
Transitional Flowqmin    Minimum      Flow
Minimum Reading
Maximum Reading
Â
Â
 m3/h
L/h
m3
15M
15
B
3.0
1.5
120
30
0.0001
99,999
20M
20
B
5.0
2.5
200
50
0.0001
99,999
3 In 1 Servo Feeders is in the short space design were especially developed to meet the needs of customers with not enough space. They offer process reliability even for the most demanding materials. They are optimally suited for the manufacture of structural parts as well as for processing of high-strength materials - even for the higher ranges of strip thickness.
By combination of straightener and roll feed into one machine, so called feeder-straightener, which is positioned directly at the press, the needed space for material loop of straightened material can be saved.
The feeder-straightener is supplied with material out of a (in comparison) very small loop of not straightened material below the Decoiler.
The decoiler is equipped with a variable speed drive as well as with a very sensitive loop control. By this way it is assured that there always will be enough material available for supply of the feeder-straightener.
In case that feeding lengths and stroke rates do require a bigger material stock within the material loop, the Coil Feeding Line will be completed with a loop pit.
Mayflay Auto Feeder 3 In 1 is suitable for all kinds of automobile stamping, appliances manufacturing, computer and electronic componets, hardware and metal parts etc industry.
New Concept Residential Digital Water Meter (DN15 - 25mm)
Model NO.: RADARK-15M
Principle: Volumetric Meter
Medium Pressure: General Water Meter
Work Environment: Dry Water Meter
Stucture: Traditional
Standards: ISO 4064
Accuracy: Class B
Water Temperature: 0.1~40 Centigrade
Water Pressure: Less Than 1.0mpa
Overload Flow: 3m3
Transitional Flow: 120L/H
Minimum Reading: 0.0001
Maximum Reading: 99,999
Connecting Thread: G3/4b
Brand: Radarking
Trademark: RADARKING
Specification: CE, CCC, ISO9001
Origin: Wuhan, China
HS Code: 90282010
Application: