Greening and spraying vehicles are actually sprinklers that people often see in their daily lives. Watering vehicles play an important role in the city's greening construction. Sprinklers can also perform different functions under different environmental conditions. Therefore, most of the sprinklers have a variety of functions. When buying a sprinkler, the manufacturer can also perform modifications according to the user's needs. However, most of the more common sprinklers are made of chassis, tanks, and The composition of the water inlet and outlet systems is complicated because of its compositional structure. Therefore, it is also necessary to pay attention to some problems in the maintenance. The following is a detailed description of the maintenance of green spray vehicles for riders! The greening sprayer must pay attention to maintenance during use, and it is also one of the most critical maintenance considerations. If the sprinkler uses a pond or river as a source of water, it must be taken into consideration that the suction pipe is completely submerged in the water. This can effectively avoid the ingestion of some larger stones and impurities. Dismantling of the filter device is quick and the water suction can be slightly excavated in a place where the water source is relatively shallow. Secondly, when using the inlet pipe system, it is necessary to pay attention to maintain the vacuum level, so that it can truly ensure that the water can be sucked into the tank of the sprinkler, and it should be noted that the system of the inlet pipe must be closed, once the hose or Hard pipes have varying degrees of wear or cracks, and there is a good chance that they will leak, which will have a serious effect on the service life of the sprinkler. If the water pump of the greening sprayer is centrifugal, then some water must be added to the water pump before water absorption, and the water shutoff should be immediately closed after the water is added. Finally, the greening and spraying vehicle must also pay attention to the maintenance of the season, especially in areas that are cold in winter, it is necessary to pay attention to the water pump and the water in the water pipe all being empty, otherwise it is very likely that the water pipe will be frozen due to low temperature. Split, in general, winter sprinklers do not work in extremely cold areas. Double-layer Film Blowing Machine High Speed Film Extruder,Extruder Blowing Machine,Blow Bottle Machine,Hdpe Film Machine Taizhou Langshun Trade Co.,ltd , https://www.longthinmachinery.com
Greening sprayer maintenance considerations