Electric Actuator Pneumatic Actuator Hydraulic Cylinder Actuator

Electric Actuator Pneumatic Actuator Hydraulic Cylinder Actuator

Model NO.: DTXa
Trademark: X-ING
Transport Package: Wooden Case
Origin: Ningbo
HS Code: 8
Model NO.: DTXa
Trademark: X-ING
Transport Package: Wooden Case
Origin: Ningbo
HS Code: 8
Introduction:
The electric actuator is a reciprocating actuator driven by a motor. It is suitable for all linear motion which needs
reciprocating and pushing. It can swing and rotate by means of other connecting rods. It has overload
protection (mechanical and electrical overload protection) It is widely used in metallurgy, electric power, coal,
chemical and other industries. It is widely used in metallurgy, electric power, coal, chemical industry and so on,
with the advantages of light weight, strong pulling force, low noise, low energy consumption and convenient
installation and maintenance. , Especially for long-distance, high-altitude and dangerous situations instead of
hydraulic, pneumatic devices, can be operated separately on-site and centralized control.
Because the nut is fixed relative to the push rod, the screw moves the push rod linearly along the guide rail in
the guide sleeve so as to make the push rod reciprocate. As a result, Push and pull action.
 
 Outline drawing:
 Electric Actuator Pneumatic Actuator Hydraulic Cylinder Actuator

Technical specification:
Electric Actuator Pneumatic Actuator Hydraulic Cylinder Actuator
NO Type Thrust power
(kw)		 speed
(mm
/s)		 Route
s(mm)		 Lc Ф1 Ф2 Ф3 Ф4 Ф5 Ф6 Ф7 A A1 B (C) C1 D E L1 L2 L3 L4 L0
kg.f KN Lmin Lmax
1 DTXa
700		 700 7 0.75 25 100-1000 370
+S		 370
+2S		 190 145 80 46 46 20 35 32 45 22 126 65 160 35 120 145 25    
2 DTXa
1000		 1000 10 1.10 25 100-1000 370
+S		 370
+2S		 190 145 80 46 46 20 35 32 45 22 126 65 160 35 120 145 25
3 DTXa
1600		 1600 16 1.50 20 100-1400 450
+S		 450
+2S		 230 170 102 70 68 25 35 50 70 32 160 80 205 35 140 180 35
4 DTXa
2000		 2500 25 2.20 20 100-1400 450
+S		 450
+2S		 230 170 102 70 68 25 35 50 70 32 160 80 205 35 140 180 35
5 DTXa
3000		 3000 30 2.20 15 100-1800 540
+S		 540
+2S		 250 200 121 80 80 30 40 55 74 40 175 95 240 40 140 230 40
6 DTXa
4000		 4000 40 2.20 15 100-1800 540
+S		 540
+2S		 250 200 121 80 80 30 40 55 74 40 175 95 240 40 140 230 40
7 DTXa
5000		 5000 50 3.00 15 100-2000 580
+S		 580
+2S		 300 220 121 80 80 30 40 55 74 40 180 100 250 40 140 230 45
1, the speed set in the table for the basic working speed, the value of this speed can be reduced by the user
    needs by the next block, the slowest speed 3.50mm / s, for decontamination of sewage decanter can be the
    slowest speed 0.25mm / Lt; / RTI & gt;
2, the table to determine the trip, the user can choose within the scope.
3, the length of the rod should be added to the LC, the minimum distance for the putter installed from the size.
4, the figure of "street", "extension" material for the 1Cr18Ni9T (stainless steel), mainly for sewage treatment
    plant decanter.

Workshop:
Electric Actuator Pneumatic Actuator Hydraulic Cylinder Actuator

OUR SALES TEAM
Electric Actuator Pneumatic Actuator Hydraulic Cylinder Actuator

Thanks for choosing X-ING as your reliable partner and please
trust both of us will create a brilliant future! Introduction:
The electric actuator is a reciprocating actuator driven by a motor. It is suitable for all linear motion which needs
reciprocating and pushing. It can swing and rotate by means of other connecting rods. It has overload
protection (mechanical and electrical overload protection) It is widely used in metallurgy, electric power, coal,
chemical and other industries. It is widely used in metallurgy, electric power, coal, chemical industry and so on,
with the advantages of light weight, strong pulling force, low noise, low energy consumption and convenient
installation and maintenance. , Especially for long-distance, high-altitude and dangerous situations instead of
hydraulic, pneumatic devices, can be operated separately on-site and centralized control.
Because the nut is fixed relative to the push rod, the screw moves the push rod linearly along the guide rail in
the guide sleeve so as to make the push rod reciprocate. As a result, Push and pull action.
 
 Outline drawing:
 Electric Actuator Pneumatic Actuator Hydraulic Cylinder Actuator

Technical specification:
Electric Actuator Pneumatic Actuator Hydraulic Cylinder Actuator

3QGB heat insulation screw pump

3QGB heat insulation screw pump,High Quality 3QGB heat insulation screw pump,3QGB heat insulation screw pump Details, CN

Botou Honghai Pump Co.,Ltd , https://www.gearpump.nl

Next Article
Prev Article

NO Type Thrust power
(kw)		 speed
(mm
/s)		 Route
s(mm)		 Lc Ф1 Ф2 Ф3 Ф4 Ф5 Ф6 Ф7 A A1 B (C) C1 D E L1 L2 L3 L4 L0
kg.f KN Lmin Lmax
1 DTXa
700		 700 7 0.75 25 100-1000 370
+S		 370
+2S		 190 145 80 46 46 20 35 32 45 22 126 65 160 35 120 145 25    
2 DTXa
1000		 1000 10 1.10 25 100-1000 370
+S		 370
+2S		 190 145 80 46 46 20 35 32 45 22 126 65 160 35 120 145 25
3 DTXa
1600		 1600 16 1.50 20 100-1400 450
+S		 450
+2S		 230 170 102 70 68 25 35 50 70 32 160 80 205 35 140 180 35
4 DTXa
2000		 2500 25 2.20 20 100-1400 450
+S		 450
+2S		 230 170 102 70 68 25 35 50 70 32 160 80 205 35 140 180 35
5 DTXa
3000		 3000 30 2.20 15 100-1800 540
+S		 540
+2S		 250 200 121 80 80 30 40 55 74 40 175 95 240 40 140 230 40
6 DTXa
4000		 4000 40 2.20 15 100-1800 540
+S		 540
+2S		 250 200 121 80 80 30 40 55 74 40 175 95 240 40 140 230 40
7 DTXa
5000		 5000 50 3.00 15 100-2000 580
+S		 580
+2S