A cyclone sepatation is a method of removing particulates from an air, gas or liquid stream, without the use of filters, through vortex separation. Totational effects and gravity are used to separate mixtures of solid and fluids. A high speed rotating air flow is established within a cylindrical or conical container called a cyclone. Air flows in a helical pattern, beginning at the top of the cyclone and ending at the bottom end before exiting the cyclone in a straight stream through the centre of the cyclone and out the top. Larger particles in the rotating stream have too much inertia to follow the tight curve of the stream, and thus strike the outside wall, then fall to the bottom of the cyclone where they can be removed. In a conical system, as the rotating flow moves towards the narrow end of the cycone, the rotation radius of the stream is reduced, thus separating smaller and smaller particles. The cyclone geometry, together with volumetric flow rate, defines the cut point of the cyclone. This is the size of particle that will be removed from the stream with a 50% efficiency. Particles larger than the cut point will be removed with a greater efficiency, and smaller particles with a lower efficiency as they separate with more difficulty or can be subject to re-entrainment when the air vortex reverses direction to move in direction of the outlet
Cyclone Dust Separator,Cyclone Dust Extractor,Dust Collector Cyclone Separator,Industrial Cyclone Dust Collector Botou Ever Lucky Environmental Protection Machinery Co., LTD , https://www.dustcontrolling.com
Bottle Blowing Moulding Mould Blowing Moulding Mould Application
This system is ideal for start-up and small-scale companies and is reliable, heavy duty, and capable of producing a wide variety of high quality P.E.T. bottles for many industries like water, alcohol, juice, liquid detergent, vegetable oil, cosmetics, pharmaceutical and personal care items which are just a few examples.
How Bottle Blowing Moulding Mould Blowing Moulding Mould Works
The Blow Molding system does not require highly trained operators to produce consistent quality bottles. The bottle making process starts by loading preforms into the preheater. The preheater uses a variable speed track that moves the preforms through a heating tunnel. The heat tunnel has specially designed heating elements for a consistent heating operation with minimal maintenance.
When the preforms have made one "trip" through the preheater, they are manually loaded two(three or four) at a time into the blow molder. After the bottles are formed in the blowing cycle, they are removed and the cycle continues. The finished bottles are then loaded directly onto a conveyor for filling or can be stored for later use.
Â
Bottle Blowing Moulding Mould Blowing Moulding Mould Features
1.Original FESTO air cylinder.
2.Minimize your initial investment by starting small.
3.Add additional systems economically as your business grows.
4.Bottles of different sizes can be produced simultaneously to meet your exact requirements.
5.Change over from one size to another can be completed simply and quickly.
6.The tooling costs (molds) are low since the design of the system is simple.
7.Systems can be dedicated to produce particular bottle sizes.
8.A short operator-training period due to the simplicity of the design.
9.Maintenance costs are kept to a minimum and highly-trained personnel are not required.
Â
Bottle Blowing Moulding Mould Blowing Moulding Mould Specifications:
Model No
900BPH
1800BPH
Material
PET/PP/PE/PC
PET/PP/PE/PC
Volume
0.2-2.5L(2-cavity)/3-6L(1-cavity)
0.05-2.5L(4-cavity)3-6L(1-cavity)
Output
900/500Bottles/Hr
1800/1000Bottles/Hr
Bottle Height(Max)
360mm
360mm
Bottle Diameter(Max)
180mm
180mm
Max Mold Plate Dimension
420x500mm(LxH)
420×500mm
Max Mold Thickness
160-240mm
160-240mm
Clamping Force
180KN
180KN
Â
Â
Â
Mold Opening Stroke
200mm(Adjustable)
200mm(Adjustable)
Power Consumption
12kw
24kw
Electric Supply
220/380V/50-60HZ
220/380V/50-60HZ
Blow Molder Dimension
1.66x0.74x2.2Mtr(LxWxH)
1.66×0.74×2.2Mtr(LxWxH)
Blow Molder weight
700kgs
700kgs
Preheater Dimension
1.46x0.71x1.58Mtr(LxWxH)
1.77×0.72×1.58Mtr(LxWxH)
Preheater Weight
300kgs
500kgs
Â
Bottle Blowing Moulding Mould Blowing Moulding Mould
Model NO.: SMB-2-880S
Cavity: 4
Max Length: 360mm
Max Diameter: 100mm
Name: Blowing Moulding Mould
Trademark: bowei
Transport Package: Export Wooden Case
Origin: Wenzhou
HS Code: 84774090
Bottle Blowing Moulding Mould Blowing Moulding Mould