Zowell RSEW multi-directional forklift is a
material handling equipment designed for long and bulky material handling and
stacking. Its unique design covers the advantages of common forklifts and stackers
as well as VNA trucks. With three omni-directional wheels, it can drive in
multiple directions such as parallel moving and oblique moving, so as able to
maneuver smaller aisles and maximize your warehouse storage safely.
As a company with experience on narrow
aisle electric forklifts for more than 15 years, Zowell always focuses on
professional warehouse solutions and customer experience. RSEW adopts electric power featured with low noise and no emission, and
can be equipped with lithium battery with convenient maintenance and longer
service life. The load wheels are equipped with the
five-stage steering deceleration and small control current, which enables the
steering angle more precise and controllable, effectively extend the service
life of the steering motor. From the aspect of security, Zowell
multi-directional forklift is equipped with steering wheels display system and
barking system to maximize safety.
In general, the man-machine engineering
simulation design makes RSEW easier to operate, more accurate in control,
providing a perfect solution for long materials handling and stacking. Meanwhile,
we provide various types according to load capacity and lift height as well as
additional options such as fork positioner and AGV modification to meet your practical
needs. Please refer to the parameters attached on our products or ask our staff
for help in any case.
Multi-directional Forklift, Omnidirectional forklift, Full Directional Forklift Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.zowellforklift.com
In view of the above situation, we conducted an experimental study on how to truly measure the metal content in wheat flour. Through several tests, it was found that the use of dual magnetic method that combines the magnetic metal detector and magnet attraction method is simple, effective, scientific and accurate. The specific method is based on the magnetic metal detector, magnets are used to aspirate magnetic metal, so that it is separated from the additives, and then calculate the magnetic metal content.
Wheat flour has additives in different degrees. The magnetic metal material analyzer used to determine the content of magnetic metal in wheat flour has a high result. 40% of the qualified products exceed the standards and become unqualified products. From the measurement principle and operation method analysis: when using this method to determine the magnetic metal material in wheat flour, they are swept into the crucible along with the magnetic metal material on the raft, and rinsed with carbon tetraoxide. Due to the higher density of sand and additives They cannot float on the surface of the carbon tetrachloride, but sink with the magnetic metal at the bottom of the crucible. The result of the measurement is not true and is obviously large.
When magnetic attraction method was used to determine the magnetic metal in wheat flour, adding additives to wheat flour had no significant effect on the test results, but the test results were obviously low. The result of the magnet attraction method was too low, and the non-conformance of the magnetic metal material exceeding the standard was not measured, and the results of the double test of this law were quite different. The main reason for this phenomenon is that when a horseshoe-shaped magnet is used for sampling, it is likely to be missing, and the flow is not even and complete without a magnetic metal detector. In addition, the magnetic metal material that is adsorbed on the magnet is not easily brushed off and will remain on the magnet, resulting in a low result and making some defective products into qualified products.
The use of a magnetic metal detector or magnetic attraction method to determine the content of magnetic metal in wheat flour has disadvantages. Practice has proved that using magnetic double magnetic method to determine the content of the two methods to take full advantage of the advantages of the above two methods, to overcome their drawbacks, especially when using magnets to attract magnetic metal material, covered with a layer of paper, as long as the bottom off the magnet, When it is flicked, magnetic metal can be obtained, which solves the problem that magnetic metal cannot be easily brushed off from the magnet.
Application of Magnetic Metal Detector in Milling Industry
The continuous development of the milling industry and the increasing use of additives. Sampling flour on the market, found that there are many cases of excessive additives. And some of the magnetic metal material in the flour was found to exceed the standard by the magnetic metal material analyzer, resulting in an increase in substandard products.