Inflatable Toys High Frequency Welding Machine Inflatable Toys High Frequency Welding Machine is a high frequency device, whose self-exited oscillator of the electron tube can produce high frequency electromagnetic field. And the plastic to be processed is in the high frequency electromagnetic field between the upper and low electrode. When its interior molecules are polarized and produce heat automatically by mutual movement and friction, it will be welded with the pressure of the die. Mattress Making Machine,Inflatable Toys High Frequency Welding Machine,Pvc Air Mattress Making Machine,Life Jacket Making Machine Hangzhou Xiaoshan Wanfeng Mechanical & Electrical Equipment Factory , https://www.hfweldingmachinery.com
Fault monitoring monitors the axial displacement of the rotating machine rotor.
The position (displacement) of the parametric rotor relative to the bearing pad is measured.
Rotating machinery for various types of sliding bearings. Such as steam turbines, compressors, motors, fans, pumps, etc.
Technical parameter input: Eddy current sensor, 1 signal input accuracy: Indication error 1 %, standard output 1 %
The VB-Z210 integrated axial displacement signal transmitter is used with eddy current sensors and is widely used in large rotating machinery (such as steam turbines and compressors) in the power, metallurgy, petrochemical and paper industries.
Measurement and protection control of axial displacement of motors, fans, pumps, etc.
Fault monitoring monitors the axial displacement of the rotating machine rotor.
The position (displacement) of the parametric rotor relative to the bearing pad is measured.
Unit type
XCBSQ-02-01-01 LVDT Stroke Expansion Displacement Transmitter
External power supply: 220V AC or 24V DC
Technical indicators:
Signal: Receive signal sensitivity of a ST series vibration speed sensor: 20mV/mm/s ± 5%
Frequency response: 5 ~ 300Hz
Range: 500μm (peak-to-peak) or 0-50.0mm/s (true RMS)
LED indication: OK green, Alert, Danger red
Measurement error: ±1% of full scale
Current output: 4-20mA active, output load ≤500Ω
Alarm point setting: 0-100% full scale, accuracy ± 1%
Alarm reset mode: automatic or manual (site reset button, remote alarm reset terminal),
Following electrical sealing: epoxy resin, node capacity DC30V/5A or 220V/5A, single pole double throw
Power-on delay: about 10 seconds
Temperature range: -25°C to +65°C during operation
-40°C to +85°C during storage
Relative humidity: up to 95%, no condensation
Dimensions: 90W × 120L × 75Hmm
Installation size: 80×90mm
Weight: about 660g
JM-B-6Z monitoring and protection device, JM-B-6000 steam turbine monitoring and protection device, JM-B-3E dual-channel vibration monitoring and protection device,
SZC-04 series intelligent tachometer, SZC-04F series intelligent speed anti-rotometer, DZC-02A tachometer
XCBSQ-02-01-01 LVDT Stroke Expansion Displacement Transmitter
XCBSQ-02-01-01 LVDT Stroke Expansion Displacement Transmitter The sensor is a device speed sensor that converts the rotating machinery into a usable signal output according to a certain rule. The working principle of SGZP-1 is composed of electronic components, connection interfaces and external wires. The oscillator coil generates an alternating magnetic field on the metal surface. When the metal object approaches the active surface, the energy of the oscillator is absorbed in the metal, so that the oscillation is weakened and the vibration is stopped, and the shaping amplifier in the electronic component re-energizes the oscillator. The oscillation and stop vibration are converted into signals. Good anti-interference, can be used in harsh environments such as smoke, oil vapor, water vapor. Widely used in power plant steam turbines, fans and pumps and other measurement speed occasions.