CNC Aluminum Sheet means aluminum sheet produced by CNC machine.Suit small size aluminum alloy spare part,ABS plastic etc process. It saved mould fees for those clients who only need small sample or those clients who want the cutting burr to be perfect and the surface condition requirement of the sheet is very high.So CNC Aluminum Sheet is fit the niche market but it is growing.As long as you have your design.We can put it into production.Clients do not need to invest in heavy machine.Bring technology to be ground by innovation in the aluminum material or its fabrication process development.Trust in harmony,we care what our clients care. CNC Engraving and milling Aluminum sheet,CNC aluminum sheet,CNC aluminium alloy sheet Trumony Aluminum Limited , https://www.szaluminumpipe.com
When the hydraulic mechanism of the garbage truck is not working properly, first check whether the power take-off is engaged properly, whether the hydraulic oil in the fuel tank is sufficient, and whether the suction valve ball valve is fully opened. Specific troubleshooting methods are as follows.
First, the garbage truck hydraulic mechanism has no action. Follow the steps below to check it. The steps are as follows:
1. Is there sufficient oil in the hydraulic tank? When insufficient, hydraulic oil should be added;
2. Observe whether the oil inlet pipe from the fuel tank to the oil pump will cause the oil sucking phenomenon due to aging. If this is the case, replace the inlet tube.
3. Check if the gear pump fails. Put a pressure gauge, turn the pressure regulating bolt, and observe whether the table has reached the specified value;
4. If the pressure regulator bolts fail to reach the required hydraulic pressure after they are all screwed in, the gear oil pump fails and the gear pump must be replaced.
5, if the gear oil pump works normally, it is the multi-way reversing valve plugging. The valve plug should be removed to remove impurities and used after reinstalling.
Second, the garbage truck hydraulic mechanism has action but no power, check whether the gear pump fails, and whether the system pressure reaches the specified value.
3. The hydraulic mechanism of the garbage truck will slow down and check if the gear oil pump fails, the oil suction filter, and the oil return filter core are blocked.
What happens if the garbage truck hydraulic mechanism fails to operate properly?