What equipment is the fire inspection cabinet

Firefighting inspection cabinet is also called firefighting digital inspection equipment. It can perform a series of inspections such as damp, corrosion, and line faults on the fire pump control cabinet. Each time it takes to inspect the fire pump control cabinet, the time is shorter It can be done in 10 minutes. It has the advantages of high safety, low power consumption, low current, sound and light alarm, fault memory and so on. Its keys are almost all displayed in Chinese. The key description is simple, easy to understand, and reasonable in design.

Fire inspection cabinet is a type of inspection device that needs to pass the relevant fire department cccf certification. When it finds that the pump is working abnormally, it will issue an audible and visual alarm signal and record the type of failure. It can effectively guarantee the normal use of fire pumps in the event of fire danger.

When using the inspection cabinet, it is necessary to have the relevant test report of the fire linkage system, and also the cccf certification certificate for the corresponding power. As long as the relevant certificate is available, it can be put into use and meet the acceptance criteria.

The components of the inspection cabinet are mainly composed of inverters, programmable logic controllers, touch screens, plastic case switches, transformers, switching power supplies, fuses, relays, circuits, cabinets, and so on. Parts generally use Schneider, Siemens, Mitsubishi and other brands, but also many manufacturers use the component brand.

The above is the relevant knowledge of the fire inspection cabinet. After reading this, I believe that every reader has a simple understanding of the knowledge of the inspection cabinet.

For SANY Cylinder Seal Kit
Installation steps for SANY hydraulic cylinder seals

1. Preparation: Clean the working surface and seals, and check if the seals are damaged or deformed.
2. Apply lubricant: Apply a layer of lubricant to the seal and sealing groove.
3. Install the seal: Place the seal into the sealing groove, ensuring that the seal is fully embedded in the groove.
4. Install O-ring: Install the O-ring above the seal, ensuring that the O-ring is fully inserted into the groove.
5. Install the piston rod: Insert the piston rod into the seal and O-ring, ensuring that the piston rod fits tightly with the seal and O-ring.
6. Install the sealing sleeve: Place the sealing sleeve on the piston rod to ensure that it fits tightly with the piston rod.
7. Tighten the nut: Use the nut to fix the sealing sleeve on the hydraulic cylinder, ensuring that the sealing sleeve is secure.
8. Check the sealing effect: Operate the hydraulic cylinder and check if there is any leakage in the sealing element. If there is any leakage, reinstall the sealing element.

For Sany Cylinder Seal Kit,For Sany Swing Motor Seal Kit,Hydraulic Pump Seal Kit For Sany,Hydraulic Pump Seal Kit Sany
Safe Seal Technology Co., Ltd. , https://www.sprsealkits.com

Posted on February 10, 2024