Surveillance camera automatically dropped or IP automatically change the solution

Surveillance camera automatically dropped or IP automatically change the solution

A lot of friends left a message in the background to ask the question of the network monitor's inexplicable disconnection. Today, there is time to talk to us in detail.
If there was no signal in the previous analog monitoring, it was either a circuit problem or the monitoring itself was malfunctioning. The current network camera has no problem with the line, and there is no problem with the monitoring head itself, and there will also be a failure after the IP automatically changes.
Surveillance cameras are offline. The general situation is: brand video recorder + assembly head + remote access. Usually we use the video recorder Haikang or Dahua, the assembly head is the cottage (for example, we and everyone have talked about how to assemble the camera ourselves), and sometimes we buy the cheaper price is also assembled by others.
The reason why Haikang VCR has a large market is that Haikang’s fluorite cloud is convenient and stable for a large number of reasons. However, Haikang’s monitoring head is much more expensive than assembly heads. All the many engineering companies will reduce costs. Select the assembly head.
Although Haikang VCR also complies with the onvif protocol and is compatible with the assembly monitoring head, Haikang VCR definitely has better matching with its own brand and has more optimization in protocol matching.
So we usually Haikang Haikang, Dahua + Dahua, cottage + cottage! Relatively speaking, it is more stable and reliable.
If you are due to the combination of the Hai Kang VCR + assembly head, causing the camera IP address to automatically change over time, then you need to re-add IP, when re-adding, you need to pay attention to these points:
1. When debugging and installation, do not connect to the existing network first, set a fixed IP address directly, and then start adding channels.
2. After adding channels, record the IP address of each channel, and then enter the camera's web configuration interface through the computer's browser.
3. Turn off the DHCP of the camera and turn it into a static IP address. If there is an automatic IP adaptation, it needs to be turned off.
4. Finally, connect the existing network to the monitoring system, log in to the router, and bind the camera's IP address and MAC address.
The reason why a surveillance camera is set to a static IP address is that if it is not static IP, once the camera is offline, the camera will automatically obtain another new IP address through the router.
The reason for binding the IP address and MAC address of the camera in the router is to prevent the IP address from being changed by the router to other network devices after preventing the camera from being offline.
Therefore, when we install a new network monitoring system, we need to fix the IP address of the camera and video recorder. This will prevent the camera from inexplicable dropped calls.

Prismatic Battery Cell

Prismatic Battery Cell,Ev Energy Storage Battery,Rechargeable Lithium Battery,Rechargeable Battery

Beiamp New Energy Co., Ltd. , https://www.beiamp.net

Next Article
Prev Article