Sanitation Generalist - Multifunctional Cleaning Vehicle

With the development of society today, people's requirements for living conditions and accommodation conditions are also getting higher and higher. With all kinds of domestic waste, environmental pollution affects the beauty of the city, so improving the quality of the environment is the current priority. The multifunctional city cleaning vehicle is a special vehicle that cleans and removes dirt from small advertisements in the city and has other additional functions, which saves time and saves manpower. Its basic capabilities include: long life function; high-pressure pump and voltage electric spray gun; multi-purpose cleaning methods; 60 minutes continuous use; Maintenance-free matrix battery technology; imported automatic high-pressure rotary nozzle, the water pressure up to 300 kg.

When we use, we must follow the steps to operate: 1. Lubrication step, first add the No. 30 gasoline engine oil to the crankshaft pump, add it to the red point, and avoid adding more or less, to prevent the crankshaft pump from overheating the cylinder and the pump body. Case. Then add diesel or gasoline lubricants to the corresponding engine. Do not start the engine without adding lubricant. 2. Start the step, add diesel or gasoline to the fuel chamber, open the oil circuit switch under the fuel chamber, and turn the diesel or gasoline door to the state of speed, insert the key to open the power. 3, the connection step, the first filter and the inlet pipe connection, and then connect the high pressure pipe and high pressure gun and nozzle. 4. After starting up, put the inlet pipe into the water, start the machine, and hold the handle until the high-pressure water is ejected. 5. Turn off the power, close the power first, then pull the handle to discharge the remaining pressure of the equipment, and finally disassemble the high pressure barrel.

The following describes a brand, Yuchai multi-purpose cleaning car, is specifically used to clean the city sewers, pipe sediments dead mud, dredge operation vehicles, the tank is oval shape, multi-color paint can be selected, the appearance of the vehicle is beautiful and generous. It is also very good in terms of power, equipped with a variety of engine options: YC6J180-42, YC6J200-42, ISDe180-40, ISDe210-40, ISDe185-40, ISB190-40, YC6J180-46, YC6J200-46, corresponding power: 132,147,132,155,136,140,132,147 (Kw), tires are also available in a variety of options: 10.020, 10.00R20, 9.00R20, 11R22.5, 275/80R22.5. The power take-off device from the engine drives the high-pressure pump to perform high-pressure flushing operation. It has strong power and is suitable for working under a variety of operating conditions. The vehicle is equipped with a secondary engine that is specially designed to drive high-pressure pumps. The maximum working pressure can reach 30MPA. There are 7 nozzles installed on the front of the cab and the flow rate is 11.7L/min. The single-time operation time is about 3 hours. Point gun, high efficiency, stable performance, no worries. This kind of multi-purpose cleaning car has been favored by customers since its production and its efficiency has continued to rise.

A Lever Hoist is a piece of high-quality equipment used to lift and lower heavy loads without the aid of machinery. Lever Hoists have the ability to lift items in most positions, including horizontally. Different from the Chain Block or Hoist, which can only lift items vertically, the Lever Hoist's ability to lift items horizontally is a great benefit. 

A Level Hoist is usually fitted with a heavy-duty safety cap to hold your items comfortably and a top swivel connection which will allow easy lifting from all angles. The hand wheel can then be turned to release or retract as much chain length as required. The ratchet lever attached to the side of the lever hoist allows the chain to be free-willed when placed in the neutral position. When placed in the up position, it tightens the chain allowing the load to be lifted with the tension. 

Finally, to lift the load, crank the heavy-duty lever until your load has reached a suitable height. To lower the load, the ratchet lever must be switched to the downward position and the heavy-duty lever cranked to lower the chain.

Lever hoists are usually used when the user is required to hoist the load up towards the top hook where the user is positioned and has access to operate the ratchet lever. If hoisting from ground level, you might require a chain block (Hand Chain Hoist).

Lever Hoists

Lever Hoists,Lifting Lever Hoist,Chain Block And Lever Hoist,Wholesale Lifting Lever Hoist

Shandong Lite Electrical Co.,Ltd , http://www.chinacranegroup.com