1. We are among the few mainland China suppliers offering 144, 204 and 240m2 ceramic filters and 12m2 Ceramic Filter plates. 6㎡ Ceramic Filter Plate, Plate For Ceramic Disc Filter, Ceramic Plate For Ceramic Rongxin Environmental Protection Equipment Co., Ltd. , https://www.jsrxceramics.com
Application:Â
This oil purification plant is used for treating the unqualified turbine oil, especially the seriously emulsified turbine oil. This product, which can rapidly and effectively remove the water, gas and impurities, aim at turbine oil's nature of high water content, easy emulsifiable and high impurity content, and make the oil recover the new oil's nature.
Â
Advantage:
This machine breaks emulsification thoroughly, and the oil is very difficult to emulsify again after treatment. Its dehydration volume is large and it can absorb water on line. TY series, which prevent lubrication system from damage, can effectively extend the lifetime of oil and protect turbine and other machines.
Â
And this equipment is high environmentally friendly because it treating the oil totally physically, no Chemical additives, no  Chemical reaction.
Â
Feature:Â
1. Breaking emulsification thoroughly with high- molecule polymeric material, the value of breaking emulsification ≤15min (GB/F 7305).
2. Dewatering very effectively with once and for two steps dehydrating method. It can thoroughly clear away the liquid water, free water and 80% dissolved water.
3. With distinctive removing impurities technique filtering through double FH trapezoidal network and absorbing by high polymer material, this machine can make the ß3 equal or surpass 200 and make the cleanness lower grade 6(NAS1638).
4. With the trapezoidal, spiral, automatic back flushing system.
5. With the advanced dielectric condensation devices.
6. On-line oil purification can be carried out with turbine or water turbine automatically without any person.Â
Technical Parameter
item
unit
TY-10
TY-20
TY-30
TY-50
TY-100
TY-150
TY-200
Flow rate
L/h
600
1200
1800
3000
6000
9000
12000
Working vacuum degree
Mpa
0.06Â Â ~Â 0.095
Working pressure
Mpa
≤0.3
Running temperature
ºC
40 ~ 70(the temperature of turbomachine below 55ºC)
Heating power
KW
14
16
18
30
45
55
60
Total power
KW
16
18
20
33
48
61
71
Inlet/outlet caliber
mm
φ25
φ25
φ25
φ32
φ42
φ50
φ50
Size
L
mm
1280
1350
1350
100
1500
500
1600
W
mm
750
900
950
950
1000
1200
1350
H
mm
1450
1450
1500
1600
1650
1800
1800
Weight
Kg
320
400
420
450
750
800
900
Â
Â
Table2Guarantee Data after Purification
Capability item
Data
Moisture
≤100PPM
Break emulsification value
≤15min (GB/F 7305)
Clean degree
≤6grade (NAS1638)
Application:Â
This oil purification plant is used for treating the unqualified turbine oil, especially the seriously emulsified turbine oil. This product, which can rapidly and effectively remove the water, gas and impurities, aim at turbine oil's nature of high water content, easy emulsifiable and high impurity content, and make the oil recover the new oil's nature.
Â
Advantage:
This machine breaks emulsification thoroughly, and the oil is very difficult to emulsify again after treatment. Its dehydration volume is large and it can absorb water on line. TY series, which prevent lubrication system from damage, can effectively extend the lifetime of oil and protect turbine and other machines.
Â
And this equipment is high environmentally friendly because it treating the oil totally physically, no Chemical additives, no  Chemical reaction.
Â
Feature:Â
1. Breaking emulsification thoroughly with high- molecule polymeric material, the value of breaking emulsification ≤15min (GB/F 7305).
2. Dewatering very effectively with once and for two steps dehydrating method. It can thoroughly clear away the liquid water, free water and 80% dissolved water.
3. With distinctive removing impurities technique filtering through double FH trapezoidal network and absorbing by high polymer material, this machine can make the ß3 equal or surpass 200 and make the cleanness lower grade 6(NAS1638).
4. With the trapezoidal, spiral, automatic back flushing system.
5. With the advanced dielectric condensation devices.
6. On-line oil purification can be carried out with turbine or water turbine automatically without any person.Â
Technical Parameter
item
unit
TY-10
TY-20
TY-30
TY-50
TY-100
TY-150
TY-200
Flow rate
L/h
600
1200
1800
3000
6000
9000
12000
Working vacuum degree
Mpa
0.06Â Â ~Â 0.095
Working pressure
Mpa
≤0.3
Running temperature
ºC
40 ~ 70(the temperature of turbomachine below 55ºC)
Heating power
KW
14
16
18
30
45
55
60
Total power
KW
16
18
20
33
48
61
71
Inlet/outlet caliber
mm
φ25
φ25
φ25
φ32
φ42
φ50
φ50
Size
L
mm
1280
1350
1350
100
1500
500
1600
W
mm
750
900
950
950
1000
1200
1350
H
mm
1450
1450
1500
1600
1650
1800
1800
Weight
Kg
320
400
420
450
750
800
900
Â
Â
Table2Guarantee Data after Purification
Capability item
Data
Moisture
≤100PPM
Break emulsification value
≤15min (GB/F 7305)
Clean degree
≤6grade (NAS1638)
2. Established in 2003, Rongxin has 19 years' experience in ceramic filters and plates. We can manufacture ceramic filters from the smallest RX-1 (filtration area 1㎡) to world`s largest RX-240 (240㎡).
3.We can produce ceramic filter plates of all models available in the market. We can also produce customized models. We can provide all integrated solutions for customers' material dewatering operations.
4. With advanced technology and rich experience, our annual capacity is up to 120,000 units.
5. With our independently developed one-module pouring technology and the new membrane surface, our products have much better performance and longer service life. These core technologies are our solely owned intelligence properties and patents.
Online Unqualified Turbine Oil Filtration Machine with Good Reputation
Model NO.: TY
Flow Rate: 10L/Min -300L/Min or You Required
Cleanness(Nas): Grade 6
After-Sales Service: Engineers Available to Service Machinery Overseas
Power(W): According to Customer Requirement
Break Emulsification Value: 8 Min
Color: Green,Yellow,White,Blue or as You Require
Trademark: ZHONGNENG
Specification: CE, SGS, CCC, ISO9001: 2000
Origin: Chongqing, China
HS Code: 84212990
Model NO.: TY
Flow Rate: 10L/Min -300L/Min or You Required
Cleanness(Nas): Grade 6
After-Sales Service: Engineers Available to Service Machinery Overseas
Power(W): According to Customer Requirement
Break Emulsification Value: 8 Min
Color: Green,Yellow,White,Blue or as You Require
Trademark: ZHONGNENG
Specification: CE, SGS, CCC, ISO9001: 2000
Origin: Chongqing, China
HS Code: 84212990