Motorcycle Chain Wheel Suzuki Ax100

• Model NO.: SUZUKI AX100 FRONT SPROCKET
• Material: Steel
• Surface Treatment: Sand Blasting, Dull Polish, Polishing
• Tension Strength: 20.6kn~24kn China Factory OEM Motorcycle Drive Cha
• Thickness: 7.0mm
• Certificate: ISO9001:2008
• Specification: quality grade: A, B, C
• HS Code: 8483409000

• Type: Sprocket
• Certification: ISO9001：2001
• Heat Treatment: Hign Frenquency Quenching & Carburization
• Model: 428,428h
• Hardness: HRC58-64
• Trademark: GEXIN
• Origin: Zhejiang, China (Mainland)

Front sprocket :13t/14t.15t,16t, 17t, etc

Material:20cr, 20crmo

Surface treatment:Polishing for 6hours

Heat treatment:High frequency quenching ,carburization

Quality:Grade a /b  / oem

Within 20days once upon receiving the advanced payment

Construction Hoist Steel Structure

Construction Hoist Steel Structure means the construction hoist spare parts like Construction Hoist Mast Section, Passenger Hoist Cage, Construction Hoist Wall Tie and so on.

The length of each mast section is 1508mm, the rack is fixed on the mast by three bolts and it can be exchanged. For the single cage hoist there is only one rack on the mast section, and the mast section can be used for the double cages hoist by increasing one rack. The section of the mast is diverse, select one type section according to different hoist. The mast sections are bolted together with M24 bolts and nuts to form mast. The mast is tied to the building with tie-in and is the guide rail of the cage. According to the user`s or circumstance`s request, surface of mast is hot dip galvanized, which can prevent it rusting.

The tie-in(wall tie) is the linked part between mast and building, to keep the stabilization of the mast. Distance between the tie-in is about 6~9m alone the mast. There are several types of tie-in. Select one of them according to need, tie-in can adjust the vertical of mast in definite ranges. According to the user`s or circumstance`s request, surface of the tie-in is hot dip galvanized, which can prevent it rusting.

The cage dimension(L×W×H)(m): 3×1.5×2.5. We can also manufacture cages of other size according to the user`s needs. The material of the cage and the door material can be steel wire weave, aluminum-plastic panel, punched-plate, figured aluminum board or other type according to user`s needs. The gate is equipped with drawing gate,include small turn over gate.

Construction Hoist Mast Section,Building Hoist Mast Section,Passenger Hoist Cage,Construction Hoist Wall Tie, Construction Hoist Anchorage Frame

SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sysuspendedplatform.com