Aluminum G-type Finstock Strip
G type of fin which is used in the industrial cooling unit , normally it is aluminum 1100 or 1060 sheet material. Aluminum Coil thickness is regularly 0.3mm to 0.4mm temper HO.The fin will be wind on the extruded steel tube and made into cooling tower for heat transfer.The cooling unit is also called air cooling condenser.
Aluminum G type finstock strip is Trumony's strong product and we have exported this material to Asia,Middle East and Latin American countries.Quality feedback is very positive.Trust in Harmony.We care what our clients care.
Aluminium Stip,Aluminum Metal Strips,Aluminium Strip 1Mm,Anti Slip Aluminium Strips Trumony Aluminum Limited , https://www.szaluminumsheets.com
Item
MLK-342HXL
Machine Head
Plat-seam firtation sewing machine(2-time hook)
Line
Single-needle flat seam
Highest sewing speed
2800rmp
Sewing area
Max 600*400mm
Feeding material device
Feeding material(servo motor)
Needle
0.05-12.7mm(every 0.05mm)
Can be save by pin code
Built-in memory can store 50000 stitches
Each pattern highest sewing stitches
20000(one pattern)
Can be stored for sewing pattern
SD card built-in memory:2GB,900 kinds USB 32GB
Clamp device
Pneumatic
Clamp height
Max 35mm
Clamp lowest
One-piece presser foot
Pressure foot lift up
22mm
Intermittent presser foot
0.2-4.5mm or4.5-10mm(factory setting:3mm)
Hook
Double hook(standard)
Thread wiper device
Standard equipment
Trimmer device
Standard equipment
Data memory
Flash memory(can save with SD card)3 inch disk 2HD/1.44M.2DD USB
Number of user program
50
Loop program number
9
Motor
Servo motor 750w
Weight
Head:about 160kg,Operational panel:about 0.6kg,Control box:14.2-16.2kg(Depending on the destination)
Power
Single phase 220v 3-phase 200v/380v/400v/500va
Air pressure
0.5Mpa 1.81/min
H Flagship Series-To Lead The Industry New Specifications
1.barcode scanning and recognition function(option)
2.electronic thread clamp
3.automatic clamping function of upper thread(option)
4.modern systm control unit,can ensure interconnection between multiple sewing machines
5.multiple user authorization,can log in three user and set the different authorization
6.up and down axis with soft transimission system,without using gear,but use imported belt from germany to enable higher accuracy on transmission and less noise.
7.diode thread clamping device(option)
8.double axis and four tracks transmission structure on Y direction to ensure stable performance and low vibration and higher accuracy.
9.Operational panel/CPU system operation speed increased by two times pattern and data can be compatible with Mitsubishi and Brother system.
10.Multiple axis and mix servo drive system(equipped with four motor on which are on presser foot/X feeding/Y feeding/main axis)
11.Remote data transmission and acquisition function.
12.Overall unit with Japanese THK,seven pieces(single row of ball)track linkage
13.German opti brand belt,widened belt transmission.
Highest sewing speed 2800 stitches/min using stitch(3.0mm)
Achieve using 3.0mm stitching sewing 2800 rmp/min high speed sewing.Due to the adoption of the mingling corporation the original direct drive servo motor,starting/stopping reaction faster.Compared with tranditional model of mechanical operation time shortened by about 28%,the production efficiency is improved.
Testing environment
stitching pattern:rectangle(300*200mm)
stitch:3.0mm
stitching speed:2700 stitches/min(tranditional type)--2800 stitches/min(MLK-342H)
Increased high penetration force
Compared with the tranditional model,the use of servo motor more stronger than motor(750W).Even in the low-speed sewing can get strong penetration force,and sewing to the thick materials can be successfully.
Low power consumption
Computer direct drive type mechanical system use a motor with high efficiency and energy saving,is reduced about 15% compared with the market similar sewing models.this equipment is the lowest power consumption of computer decoration,and realizes high-speed sewing and strong high speed sewing machine with high penetration force.
Easily and accurately positioning of cloth
Set a double step clamp,clamp can be stop and suspended in the middle position,and then down to the lowest point.Can set up a suitable height in the middle position,can quickly and accurately positioning the material.This can be reduced the extra operation caused by positioning error of the sewing matter,saving the total cycle time during sewing.
Easily transformaton of sewing pattern
Simple to change clamp
Remove the 4 screws to replaced clamp,also can be installed to the accurate position rapidly.
Accurate positioning in order to change the feed plate.
According to the reference of the feeding plate to the bottom plate hole,the feeding plate can be easily fixed on the bottom plate,tighten the bolts to complete the installation.Accurate postioning of plate can be conveniently fixed up.
Set to large capacity of memory
The sewing machine can be stored in the memory of large amount of data(999 patterns,500000 stitches).Every time you can change pattern without reloading the sewing pattern.In addition,the SD card USB flash memory card with the storage media,read and write speed,large amounts of data can be copied or transferred to other sewing machine or electric copy or transfer to other sewing machine or computer to data management.
The number of sewing and stitch pattern can be stored depends on the number of each stitch in the pattern.
High accuracy,Easy-to-use LCD Touch-type operational panel
In additional to the basic sewing machine operations,this panel can be used to process patterns confirm the status of the various sensor input and solenoid output signals,and individually set the sewing machine functions and input/output ports.
Frequently used switching patterns can be selected quickly with the shortcut botton.
A simple explanation function is incorporated to display the application of each screen button when the button is touched.
When inputting patterns,the clamp frame movement speed can be selected from three different settings.
An easy-to-carry and use shape has been adopted.
The machine can be compliant with Mitsubishi,brother pattern design interface and data saving,reading format which is normal and more suitable for using.
To realize low tension stable sewing
Servo control of high steel material feeding device,synchronization high degree of needle bar/take-up device,can be carried out under the condition of low tension of upper and bottom thread sewing.
High spped sewing and perfect stitch appearance,sewing speed of up to 2800/rpm,energy saving and the same time achieved excellent sewing quality and production efficiency.
Beautiful stitch sewing
Because of falling needle accurately,equipment can sew fine parallel stitches and neat stitch.Use the servo control and steel improved cloth feeding device,so you can sew a high precision pattern,i.e.The high-speed sewing and sewing thick material,also won't happened bad stitching,and avoid to bad stitch.And deviation problem.
The overlapping part event hough in material,also can make the bottom thread tightness consistent.
Can easily enter a number on operation panel and set the pressure foot height.According to the thickness of the material set up appropriate height of pressure foot and prevent the excessive or in sufficient pressure foot operation,so that the bottom thread tightness consistent.
Without tilting the machine head can be adjusted by driving a needle guard
No need to tilt the machine head,can be easily adjusted by driving needle guard.
No need to tilt the machine head,also can adjust machine between the needle and hook point.
A wide field of vision is clearly visible
Due to not installed presser foot arm support plate,so that a wide field of vision is clearly visible,.also make the sewing inspection and fabric positioning also more simple.
Â
Mingling Computerised Pattern Sewing Machine for Shoes, Leather
Model NO.: MLK-342HXL
Needle Number: Single Needle
Stitch Type: Lock Type
Trademark: MINGLING
Specification: 600*400MM
Origin: China
HS Code: 8452219000
Mingling computerised pattern sewing machine for shoes,leather MLK-342HXL