Mine recovery process equipment vibration dewatering screen

The dewatering screen adopts two-electrode self-synchronization technology, a universal eccentric block and an adjustable amplitude vibrator. Mainly composed of screen box, vibration exciter, support system and motor. Two unconnected vibrators are respectively driven by the tape coupling shaft for synchronous reverse operation, and the centrifugal forces generated by the two sets of eccentric mass are superimposed along the component of the vibration direction, and reverse centrifugally canceled, thereby forming a single excitation vibration along the vibration direction. , make the screen box as a reciprocating linear motion.

Features:

â—†The whole screen is installed horizontally, but the screen is installed at a negative angle to ensure the forced dewatering effect;

â—†The screen can be selected from stainless steel composite screen, tensioned installation, or stainless steel welded strip screen, compacted to meet different needs;

â—†The vibration frequency can be adjusted at any time through the inverter to achieve the best dewatering effect;

â—†High vibration parameters: working frequency 25HZ, vibration intensity 7g.

â—†The self-synchronizing liquid lubricated vibrator is used for vibration. The screen frame adopts special noise-reducing materials and is connected by high-strength bolts to ensure reliable operation of the screen machine and reduced working noise. The working noise of the whole machine is 85dB(A), which is about the same as that of similar screens. 15dB.

â—† Set the curved screen surface in the feeding section to improve the dewatering efficiency.

â—† Set the feeding box to ensure that the material is evenly fed into the screen surface.

â—†Equipped with integral chassis for easy handling and installation.

â—†Retain the fine particles and back pressure by means of the upper filter layer.

Stamping Parts

Stamping parts are generally made of stainless steel, iron,brass, aluminum and are widely used for automotive, industrial machinery, electronics, hardware and furniture decorations.

We can produce the customized shape and size to meet your demand as we are professional manufacturer for woven wire mesh products .our metal stamping parts have high dimensional accuracy and identical sizes and can meet general assembly and operating requirements without further mechanical processing.Welcome to consult at any time.

Metal Stamping Parts,Customized SS304 Stamping Parts,Wholesale Metal Stamping Parts

Suzhou Haoxiang Screen Stencil Products Co.,Ltd , https://www.shaiwanghaoxiang.com