Large Area Perfume Diffuser can pure the air and give you the fresh environment. Our large area perfume diffuser is ideal for bank, mall, hospital,KTV,SPA,office and so on.Such as Commercial Scent Machine.
Our Electric Scent Diffuser applied advanced Atomization technology and special molded atomization head , essential oils are atomized into very small nanosized mist particles. Unlike heavier aerosol droplets which fall to the floor or other surfaces within minutes, ours are much smaller and lighter behave like a [dry" gas remaining airborne for several hours, blending uniformly throughout an interior space and without leaving
Large Area Perfume Diffuser Large Area Perfume Diffuser, Commercial Scent Machine,Fragrance Diffuser NINGBO LUBAN ELECTRIC POWER TOOLS CO.,LTD. , https://www.aye-group.com
Metal Separator
BH series metal separators are highly sensitive and accurate in detecting and separating metal grains, such as steel, iron, copper, aluminium, lead, tin, and so on. Its principle is when metal impurities pass through it, electrical detector can send a signal to control board to start valve to discharge the impurity materials. Pneumatic discharging system takes little space and ensures good performance. It can be installed directly on injection molding machine or (extruders) hoppers to protect the screw of machine from the damage caused by hard metals, reducing damages to molds, hot nozzles and valves.
Technical Parameters
Model
Diameter of Detecting Passage
Max Throughput
(processing capacity)
Detection accuracy(sensitivity)
BH-20
20mm
100L/hr
Fe:0.2mm SUS:0.5mm Cu/Al: 0.35mm
BH-30
30mm
400L/hr
Fe:0.3mm SUS:0.7mm Cu/Al:0.45mm
BH-40
40mm
1000L/hr
Fe:0.4mm SUS:0.75mm Cu/Al:0.5mm
BH-46
50mm
2000L/hr
Fe:0.5mm SUS:0.8mm Cu/Al:0.55mm
BH-50
70mm
5000L/hr
 Fe:0.8mm SUS:1.4mm Cu/Al:0.85mm
BH-60
100mm
12000L/hr
Fe:1.2mm SUS:2.0mm Cu/Al:1.35mm
BH-70
150mm
30000L/hr
Fe:1.8mm SUS:2.2mm Cu/Al:2.1mm
Advantage                                                                                                 Â
1. Adopts German technology, long life, super-high value with competitive price
2. Used to detect separated magnetic and non-magnetic metal impurities from free-fall bulk materials
3. Special design, can effectively avoid the vibration, noise and other external factors
4. Avoid moldy caused by products accumulation and obstruction
5. A variety of calibers are optional, models can meet all practical applications
6. By removing the system for quick culling, material loss can be reduced without disturbing the normal production process
7. Test material characteristics: Bulk (pellets, powder, etc.), dry, good fluidity
8. Elimination method: Vane automatically remove metal impurities, with sound and light alarm at the same time
9. Sensitivity: The highest precision is up to Fe ¢ 0.20mm, stainless steel SUS ¢ 0.5MM
10. Stand, hopper can be customized according to customer requirements
Metal Separator
BH series metal separators are highly sensitive and accurate in detecting and separating metal grains, such as steel, iron, copper, aluminium, lead, tin, and so on. Its principle is when metal impurities pass through it, electrical detector can send a signal to control board to start valve to discharge the impurity materials. Pneumatic discharging system takes little space and ensures good performance. It can be installed directly on injection molding machine or (extruders) hoppers to protect the screw of machine from the damage caused by hard metals, reducing damages to molds, hot nozzles and valves.
Technical Parameters
Model
Diameter of Detecting Passage
Max Throughput
(processing capacity)
Detection accuracy(sensitivity)
BH-20
20mm
100L/hr
Fe:0.2mm SUS:0.5mm Cu/Al: 0.35mm
BH-30
30mm
400L/hr
Fe:0.3mm SUS:0.7mm Cu/Al:0.45mm
BH-40
40mm
1000L/hr
Fe:0.4mm SUS:0.75mm Cu/Al:0.5mm
BH-46
50mm
2000L/hr
Fe:0.5mm SUS:0.8mm Cu/Al:0.55mm
BH-50
70mm
5000L/hr
 Fe:0.8mm SUS:1.4mm Cu/Al:0.85mm
BH-60
100mm
12000L/hr
Fe:1.2mm SUS:2.0mm Cu/Al:1.35mm
BH-70
150mm
30000L/hr
Fe:1.8mm SUS:2.2mm Cu/Al:2.1mm
Advantage                                                                                                 Â
1. Adopts German technology, long life, super-high value with competitive price
2. Used to detect separated magnetic and non-magnetic metal impurities from free-fall bulk materials
3. Special design, can effectively avoid the vibration, noise and other external factors
4. Avoid moldy caused by products accumulation and obstruction
5. A variety of calibers are optional, models can meet all practical applications
6. By removing the system for quick culling, material loss can be reduced without disturbing the normal production process
7. Test material characteristics: Bulk (pellets, powder, etc.), dry, good fluidity
8. Elimination method: Vane automatically remove metal impurities, with sound and light alarm at the same time
9. Sensitivity: The highest precision is up to Fe ¢ 0.20mm, stainless steel SUS ¢ 0.5MM
10. Stand, hopper can be customized according to customer requirements
Metal Detector for Plastic Industry
Model NO.: BH-70
Channel/Calibre Diameter(mm): 20, 30, 40, 70, 100, 150
Detection Efficiency(L/H): 100, 400, 1000, 5000L/H, 12000, 30000
Detection Metal: Iron Ball, Stainles Steel, Brass/Copper, Aluminum
Voltage: 110-220V, 50-60Hz
Gross Weight: About 40kg
Packing Size: 50*50*50cm
Certificate: SGS, Ce
Automation: Automatic
Trademark: HADRDEGA
Transport Package: Wooden Case
Specification: BH-20----BH-70
Origin: China
HS Code: 8543709100
Model NO.: BH-70
Channel/Calibre Diameter(mm): 20, 30, 40, 70, 100, 150
Detection Efficiency(L/H): 100, 400, 1000, 5000L/H, 12000, 30000
Detection Metal: Iron Ball, Stainles Steel, Brass/Copper, Aluminum
Voltage: 110-220V, 50-60Hz
Gross Weight: About 40kg
Packing Size: 50*50*50cm
Certificate: SGS, Ce
Automation: Automatic
Trademark: HADRDEGA
Transport Package: Wooden Case
Specification: BH-20----BH-70
Origin: China
HS Code: 8543709100