Learning: Seven Tips to Improve Heat Dissipation in LED Displays

In practical applications, improving the heat dissipation of the LED display screen not only effectively increases the efficiency of the heat dissipation of the LED display screen, but also achieves the effect of saving electricity, and is more conducive to the improvement of the service life of the LED display screen.

1, the fan cooling, the lamp shell with long-lived high efficiency fan to enhance heat dissipation, the more commonly used method of this method is low cost, good effect.

2. Using aluminum heat sink fins , this is the most common method of heat dissipation. Use aluminum heat sink fins as part of the housing to increase the heat sink area.

3, air fluid mechanics , the use of the shape of the lamp shell, to create convection air, which is the most cost-effective way to enhance heat dissipation.

4, the surface radiation heat treatment , the surface of the lamp shell to do radiation heat treatment, the more simple is to apply radiation heat paint, heat can be taken away from the surface of the lamp shell.

5, integration of thermal conduction and heat dissipation - the use of high thermal conductivity ceramics, the purpose of cooling the lamp shell is to reduce the operating temperature of LED high-definition display chip, due to LED chip expansion coefficient and our common metal thermal conductivity, thermal expansion coefficient of expansion of the material gap, The LED chip cannot be directly soldered to avoid high and low temperature thermal stress destroying the LED display chip.

6, heat pipe heat dissipation , the use of heat pipe technology, the heat from the LED display chip to the shell cooling fins.

7, heat-conducting plastic shell , in the plastic shell filled with thermal conductivity material, so as to increase the thermal conductivity of the plastic shell, cooling capacity.

It can be seen that the maturity and progress of LED display heat dissipation technology will be beneficial to its conservation and environmental protection concepts. LED electronic display manufacturers in the LED display production, improve the LED display heat output in a variety of ways. There are different considerations depending on the size of the power and where it is used when dissipating heat.

Manual Vacuum Forming Machine
1). Heater: (controlled separately) A. Heater separately Set different temperature according material forming demand to insure product quality. Adjusted the voltage of heater by AC voltage meter which can insures the heater temperature steady and save power. B. Change the heater units fleetly. And it is economical for maintain because it only need change part units.

2). Controlling the heater unit separately can short the heating time and economize energy and improve product quality and reduce cost.

3). Adjustable frame: The side size clamping can be adjusted as the working required.
ABS Thermoforming Machine, Manual Vacuum Forming Machine, Plastic Vacuum Forming Machines
Hangzhou Xiaoshan Wanfeng Mechanical & Electrical Equipment Factory , https://www.wfengmachinery.com

Posted on April 06, 2024