On July 29, the General Administration of Quality Supervision, Inspection and Quarantine held a regular press conference. Lu Chunming, deputy director of the General Administration of Quality Supervision, Inspection and Quarantine, said that in June this year, a total of eight companies carried out 11 recalls involving 412,000 defective vehicles, and the number of recalls decreased by 8.3% compared with the same period of last year.
Construction hoist is vertical transport machinery driving by pinion and rack, mainly used on construction site for transportation of personal and materials. As a permanent or sub-permanent external elevator, it also applies to store house, dock, high tower, high chimney, etc.
There are single cage and double cages hoist. According to the need gets rid of one cage of double cages the hoist will be changed to single cage hoist. SC Construction Hoist is equipped with reliable electrical and mechanical safety device. It is efficient and safety vertical transporting equipment.
Spare parts for a construction hoist may include:
Construction Hoist Parts,Passenger Hoist Rope Pulley,Construction Hoist Roller,Electromagnet Brake,Spare Parts Counter Roller SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sysuspendedplatform.com
Lu Chunming said that in June 2014, a total of 8 companies carried out 11 recalls involving 41.25 million defective vehicles. The number of recalls decreased by 8.3% compared with the same period of last year (12 car recalls in the same period of 2013). The increase was 59.3% (in the same period of 2013, 258,800 defective vehicles were recalled). Automobile companies were involved in the recall of the AQSIQ defect investigation, involving 194,100 defective vehicles, accounting for 47.1% of the total number of recalls.
In addition, in June 2014, a total of 1 recall of electrical products was implemented, involving 9,725 pieces.
1. Wire Rope: These are used to lift and lower the load in the hoist. They may need to be replaced if they become worn or damaged.
2. Construction Hoist Motor: The motors in the hoist are responsible for powering the lifting and lowering mechanism. Spare motors may be needed in case of motor failure.
3. Electromagnet Brake: The hoist is equipped with brakes to hold the load in place. Spare brake pads or other brake components may be necessary for maintenance or repair.
4. Control panels: The control panel is used to operate the hoist and control its movements. Spare control panels or control panel components may be required in case of malfunction.
5. Safety devices: Construction hoists are equipped with various safety devices, such as limit switches, overload protection, and emergency stop buttons. Spare safety devices may be needed to ensure the hoist operates safely.
6. Bearings and bushings: These components help reduce friction and facilitate smooth movement in the hoist. Spare bearings and bushings may be necessary for maintenance or repair.
7. Electrical components: Various electrical components, such as relays, switches, and fuses, may need to be replaced if they fail or become damaged.
8. Pulleys and sheaves: These components are used to guide and redirect the wire ropes in the hoist. Spare pulleys and sheaves may be required if they become worn or damaged.
9. Hooks and shackles: The hooks and shackles are used to attach the load to the hoist. Spare hooks and shackles may be needed if they become worn or damaged.
10. Construction Hoist Steel Structure parts: Spare structural components, such as beams or mast sections, may be required for repair or replacement if they become damaged or worn over time.
·In June, China recalled 41,250 defective vehicles