How to check if there is not enough oil?

How to check if there is not enough oil?

Everyone knows that when driving, they usually go farther away. If they don't pay attention, they will encounter insufficient oil or insufficient antifreeze. However, some people don't know what to do at this time, because they can go normally without adding a car, so they feel that there should be nothing. My friend drove out a few days ago and found that his engine oil was insufficient on the road, but there was nothing in the repair shop next to him, so he could only continue. He asked me what would happen if the oil was insufficient. How to check the oil shortage , now I will give it to everyone. Tell me about it.

机油不足会怎么样

Beimai Auto Parts Xiaobian tells you that this depends first and foremost on the lack of oil. If there is a shortage of oil, the oil pump will not be oiled. This is known to destroy the damaged parts and cause the body to lock up. The phenomenon, this is very dangerous, but if there is less ethics, the container of the oil has a tick mark, a readable, a minimum scale, such as the tick line just below, when the car can walk normally, generally not too Great impact, but the place must be added with oil immediately. If there is more than enough, it will be lower than the crankshaft shank, which will cause the piston to not cool for a long time and may burn. So the importance of oil is seen by everyone.

Loss of engine oil can cause damage, and the chain-driven engine uses guide rails to guide the toothed chain. The guide rail is tensioned by a hydraulic cylinder driven by the pressurized oil, and the pressure is proportional to the rotational speed of the engine.

When the oil is excessively consumed, it will not be replenished in time. On the way to high speed, due to insufficient oil pressure, the tension is insufficient, causing the toothed chain to jump, the timing is incorrect, the lightness is insufficient, and the fuel consumption is high; This can cause the piston to strike its door, causing mechanical damage to the associated connector.

机油不足会怎么样

How to check for insufficient oil

It is said that the solution to one thing is to solve it at the root cause. That is to check the oil, it is OK to check it in advance, but how to check it? Just look at the scale of the oil, generally keep it in the middle line of the oil gauge limit area. When checking, be sure to park the car in a safe and stable place, because if you go up and down, the amount of the oil dipstick must be inaccurate. The oil can not be added to the upper limit of the oil, otherwise it will cause the resistance of the crank and increase the friction loss; on the other hand, the crankcase pressure will rise, the oil consumption will increase, and the engine will be destroyed.

Special reminder: oil is not good enough

We all know that there is a scale when adding oil. Generally, if the scale is exceeded, the oil will easily overflow when it is running. If it is sprinkled on other parts, it will corrode the parts. If it is serious, it will damage the engine. It will increase the resistance of the crankshaft rotation, that is, the power is reduced, and the degree of assembly will cause oil leakage on both sides of the engine oil or the crankshaft. Therefore, when replacing the added oil, be sure to pay no higher than the oil gauge. When buying oil, you must also go to the appropriate place, such as buying oil in a regular place, to ensure your driving safety.

机油不足会怎么样

What happens to the lack of oil? If you have enough oil, check it out and let everyone know . Generally, it is necessary to check in advance to get out of the door, otherwise the damage to the parts will always occur. How to check also tell everyone, usually check the car when you do not encounter such problems. I hope that the Xiaobian article is useful to everyone, and pay more attention to Xiaobian.


ANSI B16.5 ,ASME B16.47 FLANGE

SIZE RANGE:1/2'' TO 80'' DN15-DN2000

DESIGN :WELDING NECK , SLIP ON , BLIND ,SOCKET WELDING, THREADED , LAP-JOINT

PRESSSURE:150#,300#,600#,900#,1500#,2500#

WALL THICKNESS FOR WELDING NECK FLANGE:STD,SCH40,SCH80,SCH160,SCHXXS

MATERIAL:CARBON STEEL A105 ,STAINLESS STEEL 304/304L, 316/316L

COARING:BLACK PAINT ,YELLOW TRANSPARENT PAINT ,COLD AND HOT DIP GALVANIZED

PACKAGE:SEAWORTHY PLYWOODEN CASE ,WOODEN PALLET


Pipe Flange

Stainless Steel Flange, Carbon Steel Flange, Pipe Blind Flange, Alloy Steel Flange, Pipe Plate Flange

Cangzhou Weiheng Pipe Industry Co.,Ltd , http://www.czweiheng.com