Global primary energy consumption increased by 2.5% in 2011

Global primary energy consumption increased by 2.5% in 2011

The BP World Energy Statistical Yearbook 2012 issued by BP today pointed out that in 2011, global primary energy consumption increased by 2.5%, close to the historical average, and the share of emerging economies’ consumption kept rising.

According to the introduction, the BP World Energy Statistical Yearbook 2012 is based on two major themes of the world's energy supply disruption and demand growth in 2011. First, the turmoil in the Middle East has affected the supply of oil and natural gas, the most notable of which is Libya’s supply disruption, although this is only temporary. The catastrophic accident in Fukushima, Japan, caused a chain reaction to nuclear energy and other energy supplies, leading to higher energy prices in most regions. The average annual oil price exceeded US$100 per barrel for the first time.

According to the BP World Energy Statistical Yearbook, the long-term global energy trend remains the same. In 2011, the global primary energy consumption increased by 2.5%, which was basically the same as the average level in the past 10 years, far lower than the 5.1% growth rate in the previous year. The net increase in global primary energy consumption comes from emerging economies. The energy demand of the OECD countries has fallen by 0.8% over the previous year, but emerging economies have increased by 5.3%. Among them, oil consumption grew by less than 1%, which is lower than other fossil fuels. At the same time, natural gas consumption increased by 2.2%, while the average annual consumption growth rate of coal in fossil fuels was above the average, reaching 5.4% in the world and 8.4% in emerging economies. As a result of the substantial increase in production by members of the Organization of Petroleum Exporting Countries, the gap in oil production in Libya and other regions was offset. Saudi Arabia, UAE and Qatar have all achieved record production.

At the same time, the development of renewable energy in 2011 was mixed. Statistics show that global biofuel production has stagnated, slightly increasing by 0.7%, that is, 10,000 barrels of oil equivalent per day, the lowest increase since 2000. As the proportion of ethanol fuel in gasoline has reached the “blending bottleneck”, the growth rate of biofuels in the United States has slowed down. Due to the poor harvest of sugar cane, Brazil has caused a significant reduction of 15.3% in biofuel production. In addition, the growth of renewable energy power generation exceeded the average level, reaching 17.7%. Among them, wind power dominates the trend, which is an increase of 25.8%. In the first half of the share of renewable energy power generation, the United States and China are major contributors to the growth of wind power generation. Due to the small base, solar energy increased by 86.3%.

Glazed Tile Roof Sheet Forming Machine

Glazed tile Roof Sheet Roll Forming Machine is not complicated, it can be used automatic production line equipment, also can be used partly mechanical devices and manual combination of production, but automatic production line equipment, automated processes, requires less labor, and it is PLC control, has advantages of fast speed.


Specifications:

Raw Material Colored steel, Galvanized steel, Aluminum steel
Material thickness range 0.2-0.8mm
Rollers 13 rows(according to drawings)
Material of roller 45# steel with chromed
Forming speed 15-20m/min(excluding press)
Shaft material and diameter 75mm, material is 40Cr
Type of forming machine single station with chain transmission
Controlling system PLC & Transducer(Mitsubishi )
Type of cutitng Hydraulic cutting
Material of cutting blade Cr12 mould steel with quenched treatment
Voltage 415V/3Phase/50Hz(or at buyer's requirements)
Main motor power 7.5KW
Hydraulic station power 3KW

Working process:



Pictures:

Glazed Roof Roll Forming Machine From Yingyee09Glazed Roof Roll Forming Machine From Yingyee08Glazed Roof Roll Forming Machine From Yingyee02Glazed Roof Roll Forming Machine From Yingyee001Glazed Roof Roll Forming Machine From Yingyee04


Training and Installation :
1. We offer installation service local in paid, reasonable charge.
2. QT test is welcome and professional.
3. manual and using guide is optional if no visiting and no installation.

Certification and after service:

1. Match the technology standard, ISO producing certification
2. CE certification
3. 12 months warranty since the delivery. Board.

Our advantage:

1. Short delivery period.
2. Effective communication
3. Interface customized.

Glazed Tile Roof Sheet Forming Machine,Cnc Glazed Tile Roof Sheet Machine,Aluminum Glazed Tile Roof Sheet Machine,Double Layer Glazed Roof Sheet Machine

YingYee Machinery and Technology Service Co.,Ltd , https://www.yingyeemachines.com