Glass Washer of Washing and Drying Machine for Flat Glass

      Welcome your inquiry and we will try our best to help you choose a right machine!

 

 

A letter to dear customers

 

Dear friends:

 

     Hello, to my way of thinking you may plan to purchase glass equipment when you look at this.

 

     Before purchasing machines, I hope you can pay attention to the following points:

 

 

1.Choose the right machine: Nowadays, more and more different kinds of glass processing machines, the function of some machines will overlap, people will doubt of that: Why these machines with the same function but have much difference in the price, even more low-cost features. At this time you need to think about the specification, what kind of job you want the machine to do, what kinds of machines can make good products for you, that is the point. You should do some research before purchase, so as to avoid unnecessary losses.

 

 

2. Try to save money: Now the machine price decline than in the past, but the same type of machine price in each factory with thousand different, the price gap caused by many factors, such as: Material, technology, after-sales, margins, etc. so price is not the boss, It can't make a decision.

 

 

3. Reliable quality: Choose a mature large-scale factory, because mature large factory has a high-quality design team, excellent production technology, rich experience in technology, on time delivery, perfect after-sales service, completely remove your worries.

 

 

4. After-sales service: Now the domestic edge grinding machine manufacturer has nearly hundred, when customers upgrade, first should choose high credibility and good after-sales service, to use more at ease, even if some technical problems in use, the manufacturer will also help you solve in time. Usually during the warranty period, except wearing parts are free warranty period appropriate pay the cost.

 

 

5. How to save your money?

 

The price of the machine overall profit space is not very big, if you want to just by demand from price to reduce the cost, so it is difficult to achieve, Because the manufacturers have to survive, we can't make much concessions. Some manufacturers showed is make a big profit to you, is actually seize the customer psychology, they turned it on the machine, Either the machine to cut corners, or ask you to buy another have this function but cheap machines, And often this machine is not limited processing capacity short life is, when you react, it was too late, and ultimately don not worth the candle.

 

 

6. How to choose the suitable machine?
Firstly, make a sure what kinds of machines you need, before this is asked to find the right kind of machine, to clear the properties and USES of glass, and according to the specification to choose the exact model.

 

 

      You need to understand different types and characteristics of edging machine if you want to purchase. There are much kinds of edging machine, need to according to the characteristics of the processed products, such as the scale of production to choose. For example of a round edging machine, shape edging/straight line round edging/by molding/straight line double round edging machines also can grind round edging.

      How to choose?

      We must be combined with the requirements of processed products. If the design and processing of products are round, oval or other shaped glass, you can only select or shaped by molding machine (due to straight line round edging machine can't grind round or shaped glass);

 

If the design product variety and small batch processing, it is more appropriate to choose shape edging machine, because of the shape edging machine is more convenient to replace the product, and this type machine price is more cheaper.

 

If the design processing of products is small and mass is bigger, then select by molding machine is more appropriate, because by molding machine with high production efficiency, and is easy to ensure accuracy;

 

If the design and processing of products are rectangular, oblong glass, the only choice is a straight line edging machine or straight line double edging machine (because shaped machine and by molding machine can't grind straight line rounded edges); When the product accuracy is not high, the production batch is not too big, select the straight line round edging machine (because of its low price); If the product requires high precision, production quality is also larger, select straight line double round edging machine is more appropriate.

 

 

        The purpose of my writing this letter to you, just told you that so many machines on the market at present, you want to buy cost-effective equipment, should find the manufacturers really be your side and care about you. I believe we are a conscientious company; we may earn little money, but must be responsible for you. Not only consider for our machines but also for your money.  If you choose our machines, I promise the following three points:

 

        Year warranty, except wearing parts, other component failure, damage, we offer free repair and replacement.

 

After the warranty, such as failure, we still provide free solution for you.

 

Anytime, we will offer you parts at cost price for replacement.

 

 

        Ok, many words already, hope this letter can be helpful, wish you can purchase right and good machines, help your business well.

 

      Welcome your inquiry and we will try our best to help you choose a right machine!

 

 

A letter to dear customers

 

Dear friends:

 

     Hello, to my way of thinking you may plan to purchase glass equipment when you look at this.

 

     Before purchasing machines, I hope you can pay attention to the following points:

 

 

1.Choose the right machine: Nowadays, more and more different kinds of glass processing machines, the function of some machines will overlap, people will doubt of that: Why these machines with the same function but have much difference in the price, even more low-cost features. At this time you need to think about the specification, what kind of job you want the machine to do, what kinds of machines can make good products for you, that is the point. You should do some research before purchase, so as to avoid unnecessary losses.

 

 

2. Try to save money: Now the machine price decline than in the past, but the same type of machine price in each factory with thousand different, the price gap caused by many factors, such as: Material, technology, after-sales, margins, etc. so price is not the boss, It can't make a decision.

 

 

3. Reliable quality: Choose a mature large-scale factory, because mature large factory has a high-quality design team, excellent production technology, rich experience in technology, on time delivery, perfect after-sales service, completely remove your worries.

 

 

4. After-sales service: Now the domestic edge grinding machine manufacturer has nearly hundred, when customers upgrade, first should choose high credibility and good after-sales service, to use more at ease, even if some technical problems in use, the manufacturer will also help you solve in time. Usually during the warranty period, except wearing parts are free warranty period appropriate pay the cost.

 

 

5. How to save your money?

 

The price of the machine overall profit space is not very big, if you want to just by demand from price to reduce the cost, so it is difficult to achieve, Because the manufacturers have to survive, we can't make much concessions. Some manufacturers showed is make a big profit to you, is actually seize the customer psychology, they turned it on the machine, Either the machine to cut corners, or ask you to buy another have this function but cheap machines, And often this machine is not limited processing capacity short life is, when you react, it was too late, and ultimately don not worth the candle.

 

 

6. How to choose the suitable machine?
Firstly, make a sure what kinds of machines you need, before this is asked to find the right kind of machine, to clear the properties and USES of glass, and according to the specification to choose the exact model.

 

 

      You need to understand different types and characteristics of edging machine if you want to purchase. There are much kinds of edging machine, need to according to the characteristics of the processed products, such as the scale of production to choose. For example of a round edging machine, shape edging/straight line round edging/by molding/straight line double round edging machines also can grind round edging.

      How to choose?

      We must be combined with the requirements of processed products. If the design and processing of products are round, oval or other shaped glass, you can only select or shaped by molding machine (due to straight line round edging machine can't grind round or shaped glass);

 

If the design product variety and small batch processing, it is more appropriate to choose shape edging machine, because of the shape edging machine is more convenient to replace the product, and this type machine price is more cheaper.

 

If the design processing of products is small and mass is bigger, then select by molding machine is more appropriate, because by molding machine with high production efficiency, and is easy to ensure accuracy;

 

If the design and processing of products are rectangular, oblong glass, the only choice is a straight line edging machine or straight line double edging machine (because shaped machine and by molding machine can't grind straight line rounded edges); When the product accuracy is not high, the production batch is not too big, select the straight line round edging machine (because of its low price); If the product requires high precision, production quality is also larger, select straight line double round edging machine is more appropriate.

 

 

        The purpose of my writing this letter to you, just told you that so many machines on the market at present, you want to buy cost-effective equipment, should find the manufacturers really be your side and care about you. I believe we are a conscientious company; we may earn little money, but must be responsible for you. Not only consider for our machines but also for your money.  If you choose our machines, I promise the following three points:

 

        Year warranty, except wearing parts, other component failure, damage, we offer free repair and replacement.

 

After the warranty, such as failure, we still provide free solution for you.

 

Anytime, we will offer you parts at cost price for replacement.

 

 

        Ok, many words already, hope this letter can be helpful, wish you can purchase right and good machines, help your business well.