Does the new car not check? Be careful about being pitted

Many new owners are particularly excited when buying a car, so forgetting to check their new car completely. In order to buy the car home at the fastest speed, many aspects of the inspection are ignored. When the car is brought home and finds various problems, this will lead to many unnecessary troubles. In order to prevent trouble, we must conduct thorough and careful inspections when buying a car.

1. Inspection of automobile chassis and engine

Get the corresponding certificate to verify the engine and frame number on the nameplate above the car. If there is a non-uniform place, this car has a problem. Check whether there is oil leakage and scratch under the chassis, and whether the parts are damaged. Check if the engine compartment is clean and there is no oil leakage. If there is a description of this car, it is often used. Listen to the engine idling and speed sound is normal, there is no dirt inside the tank.

2, the appearance of the car inspection

Observe the car paint and see if there are any traces of friction on the surface of the car. Sometimes the car parked inside the 4S shop is easily scratched. Look at the place where there is no depression around the body, and observe the light from different angles at a distance. It is easier to find some places where the depression is relatively small.

3, check the interior function and interior

All switches in the car are normal, and some special minor details should be actively understood, including the lighting system, sound system, and other comfort/safety configurations, their respective switch positions, whether they are working properly, and where they need attention. Check whether spare parts such as spare tires, tyre removal tools, jacks, and triangle warning signs are available. Whether the air conditioner or wiper can operate normally.

4, check the car factory date

Sometimes, some models are not easy to sell, so 4S shops are prone to stock cars. When customers buy cars, they will definitely recommend stock cars first. Therefore, when you buy a car, you must be sure to see the date of manufacture on the car. If you find a problem, you can ask the 4S shop to change the car. If the car is left for too long, there may be problems with the aging of individual parts, which is not conducive to driving in the future.

5, check the lights and odometer

Let the sales consultant turn on the light, change the high beam, low beam, fog light, double flash, turn signal, etc. to see if it is normal. Look at the odometer again. If you have to pick a car, you must choose a car with a short mileage and a short delivery date. Because the longer the time and mileage, the greater the risk of car problems.

6, tires

Check that the wheel hub surface is intact without scratches, check the tread for cracks and flaws, and complete the burrs on the tire. If there are signs of friction on the tires, it is likely that they have been used before. The car must have a spare tire.

Editor's Note: Checking the car is one thing. On the other hand, we also need to test drive to understand the performance of the car. Every 4S shop has a test drive, so if conditions permit, it must be more than a test drive.

In the edible oil pressing plant, before the extrusion of oil from oil containing materials, an oil pretreatment process is typically undertaken to improve the efficiency of production and to ultimately save on costs. The entire oil milling process generally includes: cleaning, sieving, hulling, separation, cracking, particle making, frying, softening, flaking, drying, and expelling oil materials. The process: cleaner --> sheller --> huller --> crusher / flaker --> steam cooker --> softening --> extruder --> dryer.

Oil Pressing Plant Pretreatment

• Organic impurities, such as stems and leaves, cords and chemical fibers.
• Inorganic impurities such as soil and metal.

Advantages of Our Oil Pretreatment Technology

• Heated shelling features means to reduce energy consumption.
• Double dehulling process which raises the shelling ratio to up to 85% with oil residue in hulls reduced to below 1.5%.
• Large-volume silos to facilitate adjustments to production capacity.
• Can produce oil cake as different grades and various protein levels which are adjustable to meet special requirements. Soybean cake can also be milled.
• With years of research experience on screw Oil Press machine ,we can reach residual oil and low energy consumption. 
• Complete pre-treatment system can be controlled automatically.

The Goal of Oil Pretreatment

• Improve the quality of the oil and the cake.
• Increase rate of productivity; reduce residual oil.
• Increase treatment capabilities of the equipment.
• Lessens wear and lengthens the life of the equipment.
• Ensures safety.
• Expansion improves the rate of productivity and the quality of the oil cake.

Oil Pretreatment Process

• Warm hulling process reduces energy consumption.
• Double cracking and hulling process improves the hulling ratio and reduce oil residue in the hull.
• High volume hull bin makes production flexible.
• Makes it possible to produce meals of various protein content (includes meal milling).
• Adopts the complete explosion puffing process.
• Automated controls.

Vegetable Oil Pressing Plant Turnkey Project

Cottonseed Vegetable Oil Pressing Plant Turnkey Project ,Soybean Oil Pressing Plant Turnkey Project ,Palm Oil Pressing Plant Turnkey Project ,Sunflower Oil Pressing Plant Turnkey Project

Dingzhou Yongsheng Grain & Oil Machinery Co.,Ltd. , https://www.oilpresschina.com