Digital Soldering Station 300W Soldering Iron Holder Desoldering Tool

 

Applications:

1.The electronic industry for the electronic product assembly 

2.Used in scientific research department to product development

3.for the electronics maintenance in the electronic industry

4.Enterprise or business unit's electrical soldering work

5.Electronic technology enthusiasts for the electronic product assembly

6.Apply to all kind of the college 's Electrician lab 

 

Features:

1.The whole welding machine using electrical conductivity materials, specially designed for preventing static electricity and clean indoor environment (ESD) 

2.Heating element made of imported material with advanced technology of heat-resistant, long service life

3.Heating element using low voltage ac source, to ensure the antistatic, no leakage, no interference

4.50 ~ 530 ºC temperature setting and control the stable and accurate

5.Rapid warming

6.Handle special lightweight, use for a long time without fatigue

7.Completely isolated heating element with the main power grid

8.Soldering iron parts in aviation joint and high temperature resistance of antistatic silicone rubber (silicone) cable connected to the temperature control table

9.Unique temperature locking devices, guard against temperature platitude

10.Separation design, easy to put

 

Precaution

When the power is on, the temperature is between 200°c/392°F and 480°c/896°F. Since mishandling may lead to burns or fire, be sure to comply with following precautions:

1. Do not touch the metallic parts near the tip

2. Do use the product near flammable items

3. Advise other people in the work area that the unit can reach a very high temperature and should be considered potentially dangerous.

4. Turn the power off while taking breaks and when finished using the unit

5. Before replacing parts or storing the unit, turn the power off and allow the unit to cool down to room temperature

To prevent damage to the unit and ensure a safe working environment, be sure to comply with the following precautions:

1. Do not use the unit for applications other than soldering.

2. Do not rap the soldering iron against the work bench to shake off residual solder, or otherwise subject the iron to severe shocks

3. Do not modify the unit

4. Use only genuine replacement parts

5. Do not wet the unit or use the unit when your hands are wet

6. The soldering process will produce smoke, so make sure the area is well ventilated.

7. While using the unit, do not do anything which may cause bodily harm or physical damage.





Tip Care & Use

Tip Temperature---High soldering temperatures can degrade the tip. Use the lowest possible soldering temperature. The excellent thermal recovery characteristics ensure efficient and effective soldering even at low temperatures. This also protects the soldered items from thermal damage.

Cleaning---Clean the tip regularly with a cleaning sponge, as oxidesa and carbides from the solder and flux can form impurities on the tip. These impurities can result in defective joints or reduce the tip's heat conductivity. When using the soldering iron continuously, be sure to loosen the tip and remove the oxides at least once a week. This help prevent seizure and reduction of the tip temperature.

When not in use---Never leave the soldering iron sitting at high temperature for long period of time as the tip's solder plating will become covered with oxides, which can greatly reduce the tip's heat conductivity.

After Use---Wipe the tip clean and coat the tip with fresh solder. This helps prevent tip oxidation.


Maintenance

Inspect and clean the tip

1. Set the temperature to 250°c (482°F)

2. When the temperature stabilizes, clean the tip with the cleaning sponge and check the condition of the tip.

3. If there is black oxides on the solder-plated portion of the tip, apply new solder (containing flux) and wipe the tip on the cleaning sponge. Repeat until the oxide is completely removed. Coat with new solder.

4. If the tip is deformed or heavily eroded, replace it with a new one.

Caliberating  the Iron Temperature

The soldering iron should be recaliberated after changing the iron or replacing the heating element or tip

1. Connect the cord assembly plug to the receptacle on the station

2. Set the temperature control knob to 400°c (750°F)

3. Turn the power switch to 'ON' and wait unit the temperature stabilizes. Remove the CAL pot plug

4. When the temperature stabilizes, use a straight -edge(-) screwdriver or small plug(+) screwdriver to adjust the screw (marked CAL at the station) until the tip thermometer indicates a temperature of 400°c (750°F). Turn the screw clockwise to increase the temperature and counterclockwise to reduce the temperature. Replace the CAL pot plug

 

Applications:

1.The electronic industry for the electronic product assembly 

2.Used in scientific research department to product development

3.for the electronics maintenance in the electronic industry

4.Enterprise or business unit's electrical soldering work

5.Electronic technology enthusiasts for the electronic product assembly

6.Apply to all kind of the college 's Electrician lab 

 

Features:

1.The whole welding machine using electrical conductivity materials, specially designed for preventing static electricity and clean indoor environment (ESD) 

2.Heating element made of imported material with advanced technology of heat-resistant, long service life

3.Heating element using low voltage ac source, to ensure the antistatic, no leakage, no interference

4.50 ~ 530 ºC temperature setting and control the stable and accurate

5.Rapid warming

6.Handle special lightweight, use for a long time without fatigue

7.Completely isolated heating element with the main power grid

8.Soldering iron parts in aviation joint and high temperature resistance of antistatic silicone rubber (silicone) cable connected to the temperature control table

9.Unique temperature locking devices, guard against temperature platitude

10.Separation design, easy to put

 

Precaution

When the power is on, the temperature is between 200°c/392°F and 480°c/896°F. Since mishandling may lead to burns or fire, be sure to comply with following precautions:

1. Do not touch the metallic parts near the tip

2. Do use the product near flammable items

3. Advise other people in the work area that the unit can reach a very high temperature and should be considered potentially dangerous.

4. Turn the power off while taking breaks and when finished using the unit

5. Before replacing parts or storing the unit, turn the power off and allow the unit to cool down to room temperature

To prevent damage to the unit and ensure a safe working environment, be sure to comply with the following precautions:

1. Do not use the unit for applications other than soldering.

2. Do not rap the soldering iron against the work bench to shake off residual solder, or otherwise subject the iron to severe shocks

3. Do not modify the unit

4. Use only genuine replacement parts

5. Do not wet the unit or use the unit when your hands are wet

6. The soldering process will produce smoke, so make sure the area is well ventilated.

7. While using the unit, do not do anything which may cause bodily harm or physical damage.





Tip Care & Use

Tip Temperature---High soldering temperatures can degrade the tip. Use the lowest possible soldering temperature. The excellent thermal recovery characteristics ensure efficient and effective soldering even at low temperatures. This also protects the soldered items from thermal damage.

Cleaning---Clean the tip regularly with a cleaning sponge, as oxidesa and carbides from the solder and flux can form impurities on the tip. These impurities can result in defective joints or reduce the tip's heat conductivity. When using the soldering iron continuously, be sure to loosen the tip and remove the oxides at least once a week. This help prevent seizure and reduction of the tip temperature.

When not in use---Never leave the soldering iron sitting at high temperature for long period of time as the tip's solder plating will become covered with oxides, which can greatly reduce the tip's heat conductivity.

After Use---Wipe the tip clean and coat the tip with fresh solder. This helps prevent tip oxidation.


Maintenance

Inspect and clean the tip

1. Set the temperature to 250°c (482°F)

2. When the temperature stabilizes, clean the tip with the cleaning sponge and check the condition of the tip.

3. If there is black oxides on the solder-plated portion of the tip, apply new solder (containing flux) and wipe the tip on the cleaning sponge. Repeat until the oxide is completely removed. Coat with new solder.

4. If the tip is deformed or heavily eroded, replace it with a new one.

Caliberating  the Iron Temperature

The soldering iron should be recaliberated after changing the iron or replacing the heating element or tip

1. Connect the cord assembly plug to the receptacle on the station

2. Set the temperature control knob to 400°c (750°F)

3. Turn the power switch to 'ON' and wait unit the temperature stabilizes. Remove the CAL pot plug

4. When the temperature stabilizes, use a straight -edge(-) screwdriver or small plug(+) screwdriver to adjust the screw (marked CAL at the station) until the tip thermometer indicates a temperature of 400°c (750°F). Turn the screw clockwise to increase the temperature and counterclockwise to reduce the temperature. Replace the CAL pot plug

1.high degree of automation: the whole production line adopts PLC computer automation control. realized the automatic templates. automatic demoulding agent. coating ingredients. automatic sizing. automatic cloth shop. automatic flat. automatic cutting. automatic picking. automatic pressure plate and other automation function. 
2.high output: this production line production speed is adjustable. class output between 1500 and 2600. can be adjusted for production according to the market situation. 
3.the specifications of the plate is adjustable. can produce various specifications of 2-40 mm plate. if you have special requirements. can be customized equipment. 
4. it can produce many kinds of products: glass magnesium tablet. flue sheet. composite central air-conditioning ventilation pipe plate. strengthen glass magnesium tablet. vitrified microsphere particles insulation board. polystyrene particles insulation board. partition panel. wall insulation board and other products. 
5. decrease labor: the whole production line adopts PLC computer automation control. 6 people can complete the production task of the whole line. and the intensity of labor is low. 
6. precise specification adjustment: each thickness control roller are controlled by digital display. adjust speed. according to the production requirements for the adjustment of the thickness of different specifications. high precision of adjustment. 
7. automatic cutting separation: using intelligent cutting system. according to the specifications. automatic cutting and a variety of specifications of products. reduce the amount of labor. improved the precision of products. ensure the production line production quickly. 
8. the automatic cleaning template: production line is equipped with automatic cleaning template system. product template is back after logging off and clean like new. Products after demoulding. with dedicated template automatic cleaning equipment for double-sided cleaning template again. to ensure that the thickness of the plank product with precision. 
9. automatic unloading board: fully automatic intelligent discharge plate. reduce the labor intensity of workers. prolong the service life of the template. reduce the damage to the plate. 
10. automatic pallet packing: according to customer requirements can be realized more specifications. product quantity of pallet packaging. 
11. concentrated dust collecting: the whole process of production and the subsequent finishing all have dust removal dust collecting device. to ensure the production of clean environment. reduce the pollution. improve the appearance of the image of enterprises. and collect the dust can be used again. reduce the production cost. 
Bo magnesium fire board equipment parameters:
Overall dimensions 16.5m*1.8m*1.6m
The installed capacity 11kw
Plate specification 6m*1.3m * thick (2-40)mm
The work efficiency 2000 m / Class production

Glass Magnesium Fire Prevention Board Plate Automatic Production Line

Bo Magnesium Fire Board Production Line, Magnesium Board Production Line, Fire Decorative Board Production Line

Shandong Qufu Xingbang Heavy Equipment Co., Ltd. , http://www.chinaxingbangheavyindustry.com