Carbide Cylindrical Shank Boring Rods for Cutting Tool D1 can be customized as per requirement. Most of the anti-vibration pole of the rod is hollow, to minimize the vibration generated when processing, such as the vibration of the handle for high-precision processing center, can also be used in high-speed carving high-speed milling, the main performance characteristics as follows: Foreign Sales Representative: Lumina  Carbide Cylindrical Shank Boring Rods for Cutting Tool D1 can be customized as per requirement. Most of the anti-vibration pole of the rod is hollow, to minimize the vibration generated when processing, such as the vibration of the handle for high-precision processing center, can also be used in high-speed carving high-speed milling, the main performance characteristics as follows: Foreign Sales Representative: Lumina Â
Whole House Water Filter, Sediment Water Pre Filter, Water Filter Cartridge, Water Filter Housing, Home Water Filtration System online for sale.
Provide whole house water filtration solutions depends on your local market. Whole House Water Filter,Sediment Water Pre Filter,Water Filter Housing,Home Water Filtration System Filterelated Corp. , https://www.filterelatedcorp.com
Anti-vibration Boring barÂ
is an important tool for machining in CNC machining. Its purpose is to prevent tools from shanking and to contorl, make tools vibrate which also called CNC extension rod. Especially as the CNC precision machining developing, the traditional CNC machining from 5000 rpm, 6000 to 8000 rpm, after more sophisticated and efficient cutting speed that will be developed to more than 20,000 turn. Such high-speed cutting, Higher requirements of  sufficient seismic performances is needed carbide stamping pole must  be uniform material, consistent performance of its and Precision concentric assurance to achieve such a high  speed cutting operation requirements  
Â
Specification
D(mm)
L(mm)
D1(mm)
d(mm)
M
MFT08-100-M4
Ø8
100
Ø8
Ø4.5
M4
MFT10-(100-150)-M5/M6
Ø10
100-150
Ø10
Ø5.5
M5/M6
MFT12-(100-200)-M6
Ø12
100-200
Ø12
Ø6.5
M6
MFT15-(100-200)-M8
Ø15
100-200
Ø15
Ø8.5
M8
MFT15.6-16-(100-300)-M8
Ø15.6/Ø16
100-300
Ø15.6-Ø16
Ø8.5
M8
MFT19-20-(100-300)-M10
Ø19/Ø20
100-300
Ø19-Ø20
Ø10.5
M10
MFT24-25-(100-300)-M12
Ø24/Ø25
100-300
Ø24-Ø25
Ø12.5
M12
MFT32-(150-400)-M16
Ø32
150-400
Ø32
Ø17
M16
MFT43-500-M20
Ø43
500
Ø43
\
M16
If you need more details, please feel free to contact us (Mobile:0086-15173370139 )Â or email
Why to use the carbide anti-vibration boring bar?Â
3. High Efficiency
No welding fracture concerns, emphasizing the variability of the replaceable tool head, a carbide bar can reach dozens of combinations, widely used in Rough & precision processing industrial .
Extending the tool life. The Holder can be reused even if the cutter is damaged and Easy and convenient to replace. The tip and the Holder are screwed and run in reverse direction to the spindle.
Why to choose our factory?Â
1)Â Â Business Type:Â Â Manufacturer, Factory. ISO9001:2008, SGS.
2)Â Â High precision: 0.001mm
3)Â Â There are all knid of moulds, no needs of mould fee.
4)Â Â Advanced technology, HIP sintering and precision grinding to ensure the goods performance;
5)Â Â 100% Virgin pure Raw materials;
6)Â Â Each product through the strict inspections and confirm to the requirements of the lab parameters;
7)Â Â OEM &Â ODM are welcomed;
8)Â Â Small order is acceptable;
9)Â Â Flexible payment terms (L/C,T/T, western union, Paypal, etc);
10)Â Â Provide custom made service with customer's drawing; Other size could be offered by your requirements;
11)Â Â We make sure to provide you with the best solutions for your individual case. Whether standard items or non-standard items all available;
12) Fast delivery and high quality;
13) Best after-sale service. 
Our Company
About Lihua Cemented CarbideÂ
Established in 1990, specialized in production carbide products more than 20 years and located in the hometown of tungsten carbide in China. We can manufacture all kind of tungsten carbide products.Â
Our products sold to worldwide . We have built a long term business relationship with the customers from Italy, Portugal, Germany, Turkey, USA, Mexico, Russia, India, Australia and so on.Â
Main ProductsÂ
Our Main products include : Carbide Screwed Boring Bar, Plates, Rods, Sticks, Bushings, TP nozzles, 3D Printer Nozzles, Saw Blades, End Mills & Drill Bits, CNC inserts, Value Seats, Rotary Burrs, wheel cutters, Grits, Customized cutter: Woodworking tool cutter, V-cutter, mining tool,  Any customized carbide products are acceptable.Â
Month capacity of 15TonÂ
We have sophisticated equipment, such as Sintering Furnace, Automatic suppress Machine, Manual Hydraulic Suppress Machine, Ball Mill Machine, Drying Machine, Mixing Machine etc, Our production capacity up to 15 Ton per month. Customized is welcome, customized sample can be ready in 3-5 days and 1 day can deliver for stocks.
Strictly QCÂ
We have a professional QC team follow to the System of ISO9001:2008, Covering the Raw Materials Incoming, Production Processes, Finished Products and Packaging to ensure high quality products output.
Main Product
Standard or Customized.
1. First packed in plastic boxes sperately
2. Then in paper box, the type can be seen from the special designed part
3. Last in cartons for final shipmentÂ
Shipping Methods:Â
DHL, UPS, FEDEX, TNT or as your resquests.
Below shows the estimate delivery time for different courier:
DHL: 5Â to 7Â working days
FedEx: 7Â to 10 working daysÂ
UPS: 5Â to 7Â working daysÂ
EMS: 10-14 working daysÂ
Contact
Mobile: 0086 15173370139 (available 24 hours.)
Factory Address: Tower A, 6th Building, Block C, Auto parts park, Tianyuan zone, Zhuzhou 412000, Hunan, China
Anti-vibration Boring barÂ
is an important tool for machining in CNC machining. Its purpose is to prevent tools from shanking and to contorl, make tools vibrate which also called CNC extension rod. Especially as the CNC precision machining developing, the traditional CNC machining from 5000 rpm, 6000 to 8000 rpm, after more sophisticated and efficient cutting speed that will be developed to more than 20,000 turn. Such high-speed cutting, Higher requirements of  sufficient seismic performances is needed carbide stamping pole must  be uniform material, consistent performance of its and Precision concentric assurance to achieve such a high  speed cutting operation requirements Â
Â
Specification
D(mm)
L(mm)
D1(mm)
d(mm)
M
MFT08-100-M4
Ø8
100
Ø8
Ø4.5
M4
MFT10-(100-150)-M5/M6
Ø10
100-150
Ø10
Ø5.5
M5/M6
MFT12-(100-200)-M6
Ø12
100-200
Ø12
Ø6.5
M6
MFT15-(100-200)-M8
Ø15
100-200
Ø15
Ø8.5
M8
MFT15.6-16-(100-300)-M8
Ø15.6/Ø16
100-300
Ø15.6-Ø16
Ø8.5
M8
MFT19-20-(100-300)-M10
Ø19/Ø20
100-300
Ø19-Ø20
Ø10.5
M10
MFT24-25-(100-300)-M12
Ø24/Ø25
100-300
Ø24-Ø25
Ø12.5
M12
MFT32-(150-400)-M16
Ø32
150-400
Ø32
Ø17
M16
MFT43-500-M20
Ø43
500
Ø43
\
M16
If you need more details, please feel free to contact us (Mobile:0086-15173370139 )Â or email
Why to use the carbide anti-vibration boring bar?Â
3. High Efficiency
No welding fracture concerns, emphasizing the variability of the replaceable tool head, a carbide bar can reach dozens of combinations, widely used in Rough & precision processing industrial .
Extending the tool life. The Holder can be reused even if the cutter is damaged and Easy and convenient to replace. The tip and the Holder are screwed and run in reverse direction to the spindle.
Why to choose our factory?Â
1)Â Â Business Type:Â Â Manufacturer, Factory. ISO9001:2008, SGS.
2)Â Â High precision: 0.001mm
3)Â Â There are all knid of moulds, no needs of mould fee.
4)Â Â Advanced technology, HIP sintering and precision grinding to ensure the goods performance;
5)Â Â 100% Virgin pure Raw materials;
6)Â Â Each product through the strict inspections and confirm to the requirements of the lab parameters;
7)Â Â OEM &Â ODM are welcomed;
8)Â Â Small order is acceptable;
9)Â Â Flexible payment terms (L/C,T/T, western union, Paypal, etc);
10)Â Â Provide custom made service with customer's drawing; Other size could be offered by your requirements;
11)Â Â We make sure to provide you with the best solutions for your individual case. Whether standard items or non-standard items all available;
12) Fast delivery and high quality;
13) Best after-sale service.Â
Our Company
About Lihua Cemented CarbideÂ
Established in 1990, specialized in production carbide products more than 20 years and located in the hometown of tungsten carbide in China. We can manufacture all kind of tungsten carbide products.Â
Our products sold to worldwide . We have built a long term business relationship with the customers from Italy, Portugal, Germany, Turkey, USA, Mexico, Russia, India, Australia and so on.Â
Main ProductsÂ
Our Main products include : Carbide Screwed Boring Bar, Plates, Rods, Sticks, Bushings, TP nozzles, 3D Printer Nozzles, Saw Blades, End Mills & Drill Bits, CNC inserts, Value Seats, Rotary Burrs, wheel cutters, Grits, Customized cutter: Woodworking tool cutter, V-cutter, mining tool,  Any customized carbide products are acceptable.Â
Month capacity of 15TonÂ
We have sophisticated equipment, such as Sintering Furnace, Automatic suppress Machine, Manual Hydraulic Suppress Machine, Ball Mill Machine, Drying Machine, Mixing Machine etc, Our production capacity up to 15 Ton per month. Customized is welcome, customized sample can be ready in 3-5 days and 1 day can deliver for stocks.
Strictly QCÂ
We have a professional QC team follow to the System of ISO9001:2008, Covering the Raw Materials Incoming, Production Processes, Finished Products and Packaging to ensure high quality products output.
Main Product
Standard or Customized.
1. First packed in plastic boxes sperately
2. Then in paper box, the type can be seen from the special designed part
3. Last in cartons for final shipmentÂ
Shipping Methods:Â
DHL, UPS, FEDEX, TNT or as your resquests.
Below shows the estimate delivery time for different courier:
DHL: 5Â to 7Â working days
FedEx: 7Â to 10 working daysÂ
UPS: 5Â to 7Â working daysÂ
EMS: 10-14 working daysÂ
Contact
Mobile: 0086 15173370139 (available 24 hours.)
Factory Address: Tower A, 6th Building, Block C, Auto parts park, Tianyuan zone, Zhuzhou 412000, Hunan, China
Any questions, feel free to get in touch with Filterelated team, filterelated@gmail.com are ready to serve you!
Carbide Cylindrical Shank Boring Rods for Cutting Tool
Certification: ISO 9001
Condition: New
Thread Type: M4 ~M16
Hardness: 89.5~92.7 Hra
Length: 80~400mm
Diameter: 8~32 mm
Material: 100% Raw Tungsten Carbide
Performance: Excellent Wear Resistance
Advantage: Interchangeable Screw Heads
Usage: Thread Turning Tool, CNC Machine Center
Business Type: Manufacturer
Customzied: Acceptable
Trademark: Lihua
Transport Package: Plastic and Parper Carton
Origin: Hunan, China
HS Code: 8207909000
Certification: ISO 9001
Condition: New
Thread Type: M4 ~M16
Hardness: 89.5~92.7 Hra
Length: 80~400mm
Diameter: 8~32 mm
Material: 100% Raw Tungsten Carbide
Performance: Excellent Wear Resistance
Advantage: Interchangeable Screw Heads
Usage: Thread Turning Tool, CNC Machine Center
Business Type: Manufacturer
Customzied: Acceptable
Trademark: Lihua
Transport Package: Plastic and Parper Carton
Origin: Hunan, China
HS Code: 8207909000
1. High Rigidity
Improve surface finish and perpendicularity. Made of pure tungsten carbide material, excellent rigidity, good shock absorption, no distortion as lateral stiffness too large. 2.High Precision
Improve dimensional precision. To extend the processing depth, enhance the accuracy of processing & to achieve long, ultra-deep, ultra-high precision machining possibilities.
4. Reduce CostÂ
Packing:
1. High Rigidity
Improve surface finish and perpendicularity. Made of pure tungsten carbide material, excellent rigidity, good shock absorption, no distortion as lateral stiffness too large. 2.High Precision
Improve dimensional precision. To extend the processing depth, enhance the accuracy of processing & to achieve long, ultra-deep, ultra-high precision machining possibilities.
4. Reduce CostÂ
Packing: