stainless steel screen mesh is woven with stainless steel wire such as 201, 202, 304, 304L, 316, 316L etc. the weaving type for screen mesh is determined according to our customer. Such as plain weave, plain dutch weave, twill weave, dutch twilled weave, and also for material, wire diameter, mesh size, width can also be customized. The Stainless Steel Woven Mesh is anti-corrosion, wear-resistance, heat-resistance, and acid-resisting, based on this characteristics, the stainless steel woven mesh is extensively used in mining, chemical industry, food industry and pharmaceutical industry.
Stainless steel screen mesh material:
304, 316, 304L, 316L, 430, 310s etc.
Wire diamter: 0.025mm to 18mm
Weaving method: plain weave, plain dutch weave, twill weave, dutch twilled weave
1. Plain Weave: also called tabby weave, linen weav or taffeta weave, is the most basic type of weaves. In plain weave, the warp and weft are aligned so they form a simple criss-cross pattern. Each weft thread crosses the warp threads by going over one, then under the next, and so on. The next weft thread goes under the warp threads that its neighbor went over, and vice versa.
2. Twill Weave: In a twill weave, each weft or filling yarn floats across the warp yarns in a progression of interlaces to the right or left, forming a distinct diagonal line. This diagonal line is also known as a wale. A float is the portion of a yarn that crosses over two or more yarns from the opposite direction.
3. Plain Dutch Weave: similar with plain weave, just the weft and warp wire have different wire diameter and different mesh size.
4. Twill Dutch Weave: similar with twill weave, just the weft and warp wire have different wire diameter and different mesh size.
5. Reversed Dutch Weave: difference from standard Dutch weave lies in the thicker warp wires and less weft wires.
Stainless Steel Screen Mesh Stainless Steel Screen Mesh,Stainless Steel Vibration Mesh,Stainless Steel Vibrator Mesh,High Frequency Vibrator Mesh Anping HUAHAIYUAN WIRE MESH CO.,LTD , https://www.crusherscreenmesh.com
    Big Spindle Bore Oil Country CNC Pipe Threading Lathe Machine
Â
Project
Unit
Specification
Lathe Max swing diameter
mm
φ630
Maximum turning length
mm
1000
Maximum processing outside diameter of pipe
mm
φ219
Spindle bore
mm
φ225
Number of spindle speeds
Â
Servo Promise
X/ZÂ Servo motor torque
N.m
10/15
Chuck form
Â
Three-jaw chuck
Chuck diameter
mm
φ500
Turret form
Â
Four-station ,Vertical
Tool section size
mm
32×32
X/ZÂ Rapid traverse
m/min
3/3
Tailstock quill diameter
mm
φ100
Tailstock quill stroke
mm
250
Tailstock sleeve taper
Â
MT5
Spindle center to the height of the rail
mm
315
Main motor
Â
Servo motor  11KW 3000r/min
Machine weight
Kg
5500
Machine outline size (L × W× H)
mm
3600×1750×1900
CNC system
Â
KND100Ti/GSK980TA(Optional)
Standard configuration
1.CNC system :GSK,
2.The spindle servo speed,
3.three-jaw chuck;
4.Vertical four-position electric turret,
5.With tailstock;
6.Automatic lubrication system,
7.Turning cooling system.
Â
Characters
Independent spindle, servo drives, variable speed.
1, We set up TRB (tapered rolling bearings) on this lathe to increase the rigidity of the spindle.Â
2, The spindle bore is very large and set up double chucks both front and back and you can choose electric chucks as you like.
3, The surface of the slide rail of the bed is treated by the super audio quench, which can be endurable and wear-resisting. The slide rail f saddle is treated by wear-resisting layer coated, to avoid the crawling.
4, There are two types of speed change: Manual and step less.
5, Set up self lubrication system, and easy to maintain.
if need more info, contact with sunny, tel:086-152-8891-4351
Big Spindle Bore Oil Country CNC Pipe Threading Lathe Machine