About the high beam light

In the past few days, the microblogging of vehicles involving the remote lights has triggered heated discussion among netizens. Many netizens said: “Opening a high beam light means killing.”

On December 18th, a microblog that “disrupted the high beam light is killing” was hotly debated by users on Sina Weibo, forwarding and commenting on more than 100,000 times. "You can see the pedestrians walking closer and closer. Can you see them?" In the Weibo, the remote lights are used to drive cars. They are 30 meters, 25 meters, 15 meters, 10 meters and 5 meters away from the test vehicles. In the test vehicle, within these distances, the visual effect of a model between two cars. 25 meters away, in the light of the illumination, almost can not see the model in front of the car; within 10 meters to 20 meters, you can vaguely see the model's lower body; 5 meters to see the model body.

Many media reports and group driving tests have shown that when a remote vehicle is turned on, the driver’s vision will be greatly affected, and this will lead to instant blind spots, which will lead to misjudgment of the vehicle distance. Easy to cause a car accident.

Being punished is minor, life-threatening and dangerous

According to the traffic police department, the most common situation in which the driver misuses the light is when the vehicle is driving, turning in a corner, changing lanes, or overtaking without having to turn on the turn signal in advance, or turning the turn signal on when it is changed. This makes the rear vehicles unprepared and can easily lead to collisions with the vehicles in the opposite direction or collided with vehicles in the same direction.

When a motor vehicle drives at night without a central isolation facility or on a road without a centerline, it should switch to a near-beam light 150 meters away from the opposite direction. When narrow roads, narrow bridges and non-motorized vehicles are to be used, The use of low beams, and many motor vehicle drivers in this case, still use high beam lights, dazzling lights to make the driver of the opposite direction to the car can not see the road conditions, prone to car accidents.

Night driving method

1. If you are facing the opposite direction during night driving, do not step on the brake pedal for a while, then turn right to the right, and pay attention to the right pedestrians and bicycles. When the distance from the opposite vehicle is 150 meters, the high beam should be changed to low beam. If the other party does not use the low beam, the speed should be decelerated immediately and the remote and near lights should be used to indicate each other; if they do not change, they should not change. , you should slow down to stop right to stop, do not fight with strong light on the shot, so as not to damage the two sides of the visual and cause car accidents.

2. At night, pay attention to pedestrians crossing the road from the left. In busy traffic areas on urban roads, vehicles with red lights are sometimes filled in the opposite lane. In this case, pedestrians often run out of the gap and cross the road from left to right.

Reminder: Correct use of car lights

The traffic police department reminded that if you do not use the lights in accordance with regulations, you will be given a score of 1 and a fine of 200 yuan. The car's lights include driving lights, low beam lights, high beam lights, fog lights, turn signals, and reversing lights. For the safety of you and others, please use the following guidelines to use the lights correctly when driving:

Driving lights: Lights should always be on in dim places such as darkness, rain or underground parking.

Low beam: used at night when driving in urban areas.

High-beam lights: High-beam lights are more suitable for use in the wilderness or on roads without street lighting, but remember that they should be switched back to low-beam lights to avoid dazzling the other driver.

Turning lights: The most basic purpose of turning lights is to give other vehicles and passers-by turning signals to remind others when turning. Sometimes the turn signal can also act as a light in a narrow place so that the driver can observe obstacles on both sides. When both sides of the turn signal are turned on at the same time, they act as a warning and show a wide effect.

Fog lights: light signals used in heavy fog weather.

Reversing light: When the vehicle is reversing, there will be a white reversing light at the rear of the vehicle. On the one hand, it can illuminate the road surface and obstacles at the rear of the vehicle, reducing the blind spot when reversing, and on the other hand, it is also a reminder to the rear pedestrians.